Availability
Nickky Bobby LS lift plates are designed to give you all the angles you will need to get that LS engine into the engine bay! With a precision laser-cut design, these steel plates feature five lifting points and an offset position for smooth engine angling for balanced support during installation and removal.
Not Yet Reviewed
$49.99
Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!
Not Yet Reviewed
$324.99
Nickky Bobby shock mounting brackets have universal compatibility and can be easily bolted to both new leaf spring Bobby brackets and older style CalTrac brackets. These steel brackets are sold as a pair. Each shock mounting bracket is equipped with 1/2 in. holes and a 1.5 in. bolt spacing.
Not Yet Reviewed
$39.99
Nickky Bobby leaf spring mounting plates are available to fit 3 in. and 3.5 in. axles tubes. These steel brackets offer more adjustment on your CalTrac bar, which will help with leverage on the leaf spring itself, allowing for more adjustability on how hard you hit the tire on your leaf spring setup! Along with the CalTrac adjustment, these leaf spring mounting brackets give you up to six different mounting positions for your shock setup (parallel or perpendicular 90 degree to bracket with added shock accessory) while utilizing a conveniently placed hole for tie-downs (tie-downs not included).
Not Yet Reviewed
$199.99
—
$424.99
Nickky Bobby tie-down extenders will extend your reach by 24 inches, so there's no more crawling under your car and twisting and turning! When paired with NBI bolt-on tie-down brackets (sold separately), these steel tie-down extenders will make loading and unloading a breeze! Sold as a pair.
Not Yet Reviewed
$59.99
Nickky Bobby bolt-on tie-down brackets come with 1/2 in. holes and 1.50 in. bolt spacing to fit most 4-link bolts and spacing. They also come with needed bushings and spacers to fit 3/8 in. shock bracket bolts. These steel brackets can bolt directly to your housing and/or bolt directly to your frame! They're made to be paired with tie-down extenders (sold separately). Drilling required for installation. Order the brackets needed for your application.
Not Yet Reviewed
$34.99
Nickky Bobby breather rings give you the aesthetics of a trim ring with the function of a pass through breather tube! Breather tubes often get banged up while opening the deck lid or taking the lid off. These aluminum bolt-on flanges hide the breather tube and stays looking sharp for a good long time!
Not Yet Reviewed
$124.99
Nickky Bobby S10 and G-Body bolt-on long travel shock towers will allow you to retain "stock style" suspension all while utilizing the tuning advantage of a 24 in. shock and a taller, lighter spring with more sprung energy. These brackets with the supporting recommendation pieces will net you around 10.5 in. of travel with maximum tuning ability! While these are bolt-on pieces. NBI highly recommends they be welded to the frame for maximum strength and durability. You will also have to cut spring pocket for clearance for new longer shock. Sold as pair (one for driver and one for passenger side). Hardware is included in kit for installation. The brackets themselves stand about 8 in. high off the frame and if you're running an LS, they have 6.5 in. of clearance from cylinder head on drivers side and 5 in. of clearance of passenger side (most GM vehicles have engine offset 1.5 in. to passenger side from factory for driver and steering clearance). For drag racing and off-road use only.
Not Yet Reviewed
$449.99
Nickky Bobby exhaust port covers provide a simple solution for covering up the ports on your engine for transportation or storage. The kits come with all the necessary hardware and O-rings to cover up your exhaust ports. The O-rings will give you a water-tight seal. Heads that already have O-rings in the exhaust ports can use the flat-style covers without O-ring grooves. Order the exhaust port covers designed for your application needs and engine type.
Not Yet Reviewed
$19.99
—
$34.99
Nickky Bobby 1968-74 Nova/1967-69 Camaro bolt-on long travel shock towers will allow you to retain "stock style" suspension, all while utilizing the tuning advantage of a 19 in. shock and a taller, lighter 14 in. spring with more sprung energy. These high-grade steel brackets with the supporting pieces will net you around 8.25 in. of travel with maximum tuning ability! While these are bolt-on pieces, NBI highly recommends they be welded to the frame for maximum strength and durability. You will also have to cut spring pocket for clearance for new longer shock and spring. Sold as pair (one for driver and one for passenger side). Hardware is included in kit for installation. The brackets themselves stand about 8 in. high off the frame but angle out towards the wheel well, so they normally have plenty of clearance! Intended for off-road use only.
Not Yet Reviewed
$449.99
Nickky Bobby ball joint spacers are designed to give you extra space between the frame and control arm, but their main purpose is to change the angle of the ball joint to allow more articulation, thus allowing more downward travel of your front suspension. Made from billet 6061 aluminum, these spacers are available for the driver and passenger side of the vehicle. These shims can be used with any K5208 bolt in upper ball joint, which is the main style used in a majority of vehicles and almost all aftermarket control arms. For off-road and racing use only. Not intended for street use.
Not Yet Reviewed
$274.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
