MSD Ignition at Summit Racing

MSD Magnetic Signal Stabilizers

MSD magnetic signal stabilizers are designed to convert the signal from a magnetic pickup to a square wave trigger signal for the MSD ignition control. They include the necessary wiring and the special wire connector for the magnetic pickup harness.

5.0 out of 5 stars ( 1 )

$143.95

MSD Non-Magnetic Crank Trigger Signal Pickups

MSD non-magnetic crank trigger signal pickups are replacements for their Flying Magnet crank trigger kits. Keep yours functioning properly with parts from MSD.

4.17 out of 5 stars ( 6 )

$136.95

—

$330.95

MSD Crank Trigger Signal Pickups

MSD pickups are the same high-output assemblies that are currently found in all MSD crank trigger kits. They're made to replace defective or damaged pickups in all MSD crank trigger kits.

3.88 out of 5 stars ( 8 )

$194.95

—

$199.95

MSD Tach Signal GMR Pickups

MSD tach signal GMR pickups simply attach, with no splicing or cutting, to a current-carrying wire, and turn that information into a 12 V rpm signal. That signal can then be used to activate a shift light, rpm activation switch, or tachometer.

3.71 out of 5 stars ( 7 )

$114.95

MSD Cam Sync Generators

After an MSD DIS-2 series ignition control is installed on the waste spark ignition system of some vehicles, the ECM of the vehicle will not be able to receive a cam sync signal. These MSD cam sync generators produce a cam sync signal after startup for the factory ECM. This is done by detecting a cylinder that is under compression through its signal wire, which is wrapped around the designated spark plug wire.

4.0 out of 5 stars ( 2 )

$108.95

On Sale

MSD Pro-Billet Distributors

MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.

4.74 out of 5 stars ( 409 )

$599.95

$389.95

—

$849.95

MSD Pro-Billet Ignition Bundles

MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector

5.0 out of 5 stars ( 3 )

$699.95

—

$749.95

MSD High-Current Solid State Relay Blocks

MSD high-current solid state relay blocks take the place of four standard relays and eliminates unsightly wiring. Four independent channels can be activated using either power or ground. Each channel is capable of handling up to 35 amps of continuous current, providing up to 140 amps of power, and also has the capability of pulse width modulation. The blocks can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90 degrees to accommodate various mounting locations. Clean up your wiring with MSD high-current solid state relay blocks. Features include: * Operates from 7 V to 20 V supply * Four independent channels, 35 amps each continuous or 100 amps for 8 seconds * Combined total continuous current rating of 140 amps * Channels can be run in parallel for devices requiring more than 35 amp single-channel rating * Over-temperature, short circuit, and overload protection * Diagnostic LEDs and status indicators * Multiple mounting options * Single wire activation by switching power or ground * Available in red or black * PWM signal can be used--maximum frequency of 150 Hz and a duty cycle range from 50 to 90 percent

4.33 out of 5 stars ( 18 )

$222.95

MSD Pro-Billet HEI Distributors

The MSD Pro-Billet HEI distributors pick up where the originals left off. Drawing on years of high-performance ignition experience, MSD engineers created a unique ignition module and internal coil that are capable of running above 9,000 rpm. Stock and other aftermarket modules lose spark energy at about 4,500 rpm. These modules produce 50 percent more current than stock units, and deliver a much more precise timing signal as well as more dwell control. The coil delivers over 100 millijoules of energy across the plug gap. For strength and high rpm stability, the QPQ-treated oversized shaft is guided by a sealed ball bearing on top and long sintered bushing at the bottom. The QPQ coating provides a low-friction coating on the shaft and also makes it highly resistant to corrosion. TIG welded to the top of the shaft is an adjustable mechanical advance assembly. The distributors are supplied with extra springs and stop bushings, so you can tailor an ignition curve to match your driving needs. The advance assembly features chromoly weights that slide on nylon pads for smooth timing advancement through the entire rpm range. There is also a vacuum advance canister to improve economy while cruising. All of these features are enclosed in a great looking, billet aluminum housing that is CNC-machined for accuracy and incredible strength. The distributors come complete and ready to drop in with a high-quality rotor and cap with brass terminals for great spark transfer. Simply connect a 12 V source to the distributor and you're up and running. They're designed to replace GM HEI distributors that use a 4-pin ignition module.

4.63 out of 5 stars ( 38 )

$649.95

—

$699.95

MSD Inductive Timing Lights

MSD inductive timing lights are designed for the racer or professional who needs a timing light that is tough, easy-to-use, and extremely accurate. They can be used with any points or electronic ignition, and provide an accurate signal from 0 to 8,000 rpm.

4.52 out of 5 stars ( 60 )

$222.95

MSD Pro-Billet Locked-Out Distributors

MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.

4.64 out of 5 stars ( 33 )

$479.95

—

$499.95

MSD Pro-Billet Tach Drive Distributors

If your racecar, Corvette, or race Corvette requires a distributor with a mechanical tach drive, these Pro-Billet Tach Drive distributors from MSD are what you need. Their race-proven magnetic pickup delivers precise trigger signals to your MSD ignition every time one of the reluctor's precision paddles pass by. This reluctor assembly is connected to an oversized steel shaft for increased strength and endurance, and is responsible for triggering the magnetic pickup. Inside the stout billet 6061-T6 aluminum housing, a sealed ball bearing and long sintered bushing guide the 0.500 in. steel shaft for high-rpm accuracy. Just above the reluctor is an adjustable mechanical advance assembly that lets you tailor a timing curve to match your engine's needs. This assembly is TIG welded for strength, and features chromoly weights and nylon pads to ensure smooth advance as the rpm increases. Corvette models feature a vacuum advance, and are available with or without an adjustable slip collar for engines that have had the deck height modified or use exotic intake manifolds. The distributors also feature a Rynite base. The tach drive assembly has a grease fitting for lubrication, is compact to clear the firewall and linkage, and can be repositioned easily to fit different applications. These distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition.

5.0 out of 5 stars ( 10 )

$685.95

MSD Starter Savers

MSD Starter Savers reduce the stress on your starter and flywheel. Designed just for race engines with locked-out timing, the controllers automatically retard the timing during cranking to prolong the life of your starter. They feature 10 and 20 degree retard settings, and automatically deactivate when your engine reaches over 800 rpm. The Starter Savers also stabilize the trigger signal, and have an LED to confirm operation. They work with magnetic pickups only.

4.76 out of 5 stars ( 42 )

$212.95

MSD Pro-Billet Distributor Plugs with Cam Sync

MSD Pro-Billet distributor plugs with cam sync are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a Hall-effect cam sync signal needed for the EFI system to reference the #1 cylinder. For wet sump applications, the plug also drives the oil pump. MSD cam syncs are plug-and-play with Holley EFI systems, and can easily interface with most aftermarket EFI systems. MSD cam sync plugs feature: * Built-in LED makes set-up and indexing quick and easy * Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal * CNC-machined billet housing with black anodized cap provides good looks and excellent durability * Available with cast melonized, steel, or bronze distributor gear, depending on the application * Chevrolet version is supplied with an adjustable slip collar for blocks with a non-standard deck height

4.5 out of 5 stars ( 8 )

$357.95

—

$449.95

On Sale

MSD Pro-Billet Ready-to-Run Marine Distributors

MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.

4.13 out of 5 stars ( 16 )

$819.95

$614.95

—

$819.95

MSD Programmable Digital-7 Plus CD Ignitions

MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.

3.33 out of 5 stars ( 3 )

$1,126.95

MSD Replacement Distributor Reluctors

These MSD replacement distributor reluctors will fit your MSD Pro-Billet Chevrolet distributors. They are made up of a special material to pick up the signal inside of the distributor. They come available for standard or marine-type distributors.

3.83 out of 5 stars ( 12 )

$47.25

MSD Pro-Billet Marine Distributors

MSD recognized the need for a true marine performance distributor and built these Pro-Billet marine distributors to answer this need. Marine environments place rigorous demands on every component of the ignition system, especially the distributor. The combination of water spray, salt exposure, full throttle acceleration, and harsh vibrations all take their toll. The housing is CNC-machined from billet 6061-T6 aluminum, creating a housing with no porosity or weak areas. Internally, a Tuftride coated steel shaft is guided by a sealed ball bearing and an extra-long sintered bushing for high-speed stability and endurance. Each distributor uses MSD's race-proven magnetic pickup to trigger the ignition control. The pickup receives its signal through a precision-manufactured reluctor that is attached to the shaft. The mechanical advance assembly receives a QPQ plating for long lasting resistance to corrosion in marine environments. Their mechanical advance assembly is easily adjustable, so you can dial-in an ignition curve to match your boat's application. Three additional sets of advance springs and stop bushings are included with detailed instructions, making adjustments easy to perform and understand. The distributor cap is bolted and sealed to the aluminum base, and has two flame arrestor holes with brass screens machined into the base of the distributor. This design works to prevent ignition of gas fumes that may build up in the engine compartment. A special weathertight connector is supplied to provide a positive lock and water-resistant connection. This heavy-duty connector will withstand high temperatures and water, and plugs directly into the MSD 6M-2 or 7M-2 ignitions. The distributors come complete with a high-quality, bolt-down alkyd cap and MSD's racing rotor. These high-quality distributors have been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard. They require the use of a separate ignition box.

3.25 out of 5 stars ( 4 )

$562.95

—

$649.95

MSD Digital Single-Channel Ignition Testers

MSD single-channel ignition testers allow you to check the entire ignition system while it is in the car. Once the ignition tests good, you can continue troubleshooting and find the culprit. The testing units produce a simulated trigger signal that fires the ignition just as if the engine were running. A special load-producing, clip-on spark plug is included to connect to the coil wire. If the spark is unable to jump the gap of the tester, there is an ignition problem and you can trace it down. The testers operate on 4, 6, or 8-cylinder engines and will simulate up to 10,000 rpm.

4.89 out of 5 stars ( 9 )

$499.95

MSD Pro Mag Tach Converters

MSD Pro Mag tach converters will convert the magneto's signal into a 12 V square wave signal that your tachometer can understand. They are less than 3 in. long and feature epoxy-encased circuits to resist water and vibration.

4.71 out of 5 stars ( 7 )

$176.95

MSD Distributorless Ignition Tachometer Adapters

MSD distributorless ignition tachometer adapters allow you to install an aftermarket tachometer on vehicles with no distributor and multiple coil packs. These compact tach drivers measure only 1.5"x 3.5"x 2" and are potted with a polyurethane compound for vibration and water protection so it can easily be mounted under the hood. It wires inline on the coils' 12 volt supply wire where it senses the current going through the wire and converts this information into a 12 volt output signal that most aftermarket tachometers use as a trigger signal. MSD distributorless ignition tachometer adapters can be used on 4, 6 or 8-cylinder engines.

4.57 out of 5 stars ( 7 )

$176.95

MSD Blank Distributor Caps

MSD blank distributor caps are designed as replacements for MSD Pro-Billet dual sync EFI distributors using a direct ignition system kit. They can also be used on distributors equipped with two hall-effect sensors for crankshaft and camshaft signals processing sequential fueling and/or coil-on/near-plug (COP/CNP) applications. Simply remove the distributor cap and rotor for proper fitment. Order an MSD COP blank cap for dual sync distributors to keep your engine's spark plugs firing properly.

5.0 out of 5 stars ( 1 )

$33.73

MSD Atomic TBI Throttle Position Sensor Modules

MSD Atomic TBI throttle position sensor modules are designed for use with the MSD Atomic throttle body fuel injection system. They connect inline to the Atomic TBI communication network and provide a common 0-5 V throttle position output signal required for the operation of an electronic overdrive transmission or other accessory.

5.0 out of 5 stars ( 3 )

$306.95

MSD MAP Sensors

The pressure inside your intake manifold is extremely important input to the ECU—so a quality MAP sensor from MSD is crucial to your engine's performance. These replacement sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 V. They're available in several different versions for naturally aspirated engines, as well as engines with forced induction.

4.42 out of 5 stars ( 12 )

$75.55

—

$188.95

32 Results Found For "signal"