MSD Ignition at Summit Racing

MSD Adjustable Low RPM Modules

MSD adjustable low-rpm modules allow you to select any rpm between 1,000 and 3,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using the MSD 2-step module to leave the starting line below 3,000 rpm. They plug directly into the rpm module receptacle on the 2-step module selector, and can also be used on MSD's Soft Touch rev controls, rpm-activated switch, and shift light.

4.38 out of 5 stars ( 8 )

$54.05

MSD Adjustable Timing Controls

Change your vehicle's ignition timing without leaving the driver's seat with one of these MSD adjustable timing controls. They're designed to fit virtually all vehicles with a 12 V negative-ground ignition, a distributor, and an externally mounted coil. They feature a knob that mounts to the dash for easy and accurate timing adjustments, allowing you to adjust timing up to 15 degrees to compensate for bad gas, altitude changes, and heavy loads.

4.17 out of 5 stars ( 18 )

$299.95

MSD Adjustable Slip Collars

These MSD adjustable slip collars are designed to give you height adjustment on your distributor. They are made of steel and feature a natural finish. The collars use two Allen head set screws to adjust for tall deck engine blocks, or others that have been decked.

5.0 out of 5 stars ( 4 )

$47.25

MSD Ignition Control Units

MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.

4.86 out of 5 stars ( 37 )

$562.95

—

$564.95

MSD Power Grid System Controllers

MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card

4.1 out of 5 stars ( 10 )

$377.95

—

$1,449.95

MSD Pro-Billet HEI Distributors

The MSD Pro-Billet HEI distributors pick up where the originals left off. Drawing on years of high-performance ignition experience, MSD engineers created a unique ignition module and internal coil that are capable of running above 9,000 rpm. Stock and other aftermarket modules lose spark energy at about 4,500 rpm. These modules produce 50 percent more current than stock units, and deliver a much more precise timing signal as well as more dwell control. The coil delivers over 100 millijoules of energy across the plug gap. For strength and high rpm stability, the QPQ-treated oversized shaft is guided by a sealed ball bearing on top and long sintered bushing at the bottom. The QPQ coating provides a low-friction coating on the shaft and also makes it highly resistant to corrosion. TIG welded to the top of the shaft is an adjustable mechanical advance assembly. The distributors are supplied with extra springs and stop bushings, so you can tailor an ignition curve to match your driving needs. The advance assembly features chromoly weights that slide on nylon pads for smooth timing advancement through the entire rpm range. There is also a vacuum advance canister to improve economy while cruising. All of these features are enclosed in a great looking, billet aluminum housing that is CNC-machined for accuracy and incredible strength. The distributors come complete and ready to drop in with a high-quality rotor and cap with brass terminals for great spark transfer. Simply connect a 12 V source to the distributor and you're up and running. They're designed to replace GM HEI distributors that use a 4-pin ignition module.

4.63 out of 5 stars ( 38 )

$649.95

—

$699.95

MSD RPM Activated Switches

From light bulbs, to the high-speed retard function on an MSD timing computer, to air shifters, these MSD rpm activated switches turn on almost anything. They use MSD's plug-in rpm modules to turn on your components at any rpm you select.

5.0 out of 5 stars ( 18 )

$181.95

MSD Pro-Crimp Tool II

MSD'S original Pro-Crimp tool is a favorite to many racers and race shops, but even a great design can be made better. The new and improved Pro-Crimp tool delivers the same repeatable crimps that you expect but with an improved chassis. The hardened steel frame features streamlined hand grips with improved leverage to ease the crimp effort. The molded handles also feature a slip-free grip for a secure handle when working. The tool is supplied with crimping/stripping dies for MSD dual crimp spark plug wire terminals. Additional dies sold separately.

4.82 out of 5 stars ( 98 )

$136.95

MSD Distributor Rotors

MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.

4.73 out of 5 stars ( 154 )

$67.39

—

$67.49

MSD Circle Track Digital Soft Touch Rev Limiters

For the Saturday night racer, MSD circle track digital soft touch rev limiters produce a smooth, accurate rev-limiting action. They feature two rotary dials with an easy-view LED display, eliminating the need for plug-in rpm modules. A unique feature is each unit's ability to record the highest rpm reached during a race—which is helpful information for racers and tech officials alike. MSD rev limiters are epoxy filled to protect against the abuse of dirt track racing.

5.0 out of 5 stars ( 13 )

$249.95

MSD Digital 6CT Ignition Controllers

MSD Digital 6CT ignition controllers are hardcore ignitions that work as hard as you do at the track. Their superior design is packed with a slew of features, including a large, easy-to-read LED display and a simple setup utilizing three rotatory dials. MSD Digital 6CT ignition controllers offer the smoothest performance ever that comes in a fully potted, tamper-proof housing that uses a single connector to keep wiring tidy. MSD Digital 6CT ignition controllers feature: * Built-in start retard adjustable in 0, 10, or 20-degree increments for quick, easy starts and extended starter life * LED displays rev limit, highest rpm turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Single plug-in connector for clean wiring * Tamper-proof screws to prevent modification of unit * Records highest rpm the engine turned for last 20 minutes of run time * Works on 4, 6, and 8-cylinder engines * Reverse polarity and overheat protection provide ultimate reliability

4.0 out of 5 stars ( 4 )

$511.95

—

$562.95

MSD Digital 6 Off-Road Ignition Controllers

MSD Digital 6 off-road ignition controllers deliver a fully potted design that provides the ruggedness and reliability needed to get your 4WD to any destination. These units multi-spark below 3,000 rpm on V8s—ensuring clean, crisp throttle response and complete fuel burn when crawling at low speeds. Above 3,000 rpm, a powerful capacitive discharge spark keeps the fire lit until you let off the skinny pedal. The smooth, accurate rev-limiter will protect your engine from over-rev damage due to drivetrain failure or a slick spot on the trail. Whether you're crawling rocks, high-speed desert racing, or playing in any kind of harsh terrain, your off-road rig can benefit from an MSD Digital 6 off-road ignition controller. Features include: * MSD's smoothest rev limiter yet! Easy on your engine * Fully potted design provides reliability even in high-vibration and wet circumstances * Large, easy-to-read LED display * Simple setup of features, such as the rev limiter, with three rotary dials on the face of the unit * Built-in Start Retard adjustable in 0, 10, or 20 degree increments for quick, easy starts and extended starter life * LED displays rev limit, highest RPM turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Rugged housing to stand up to demanding off-road and race conditions * Single plug-in connector for clean wiring * Works on 4, 6, and 8-cylinder engines * Reverse polarity and overheat protection provide ultimate reliability

4.29 out of 5 stars ( 7 )

$562.95

MSD Launch Control Module Selectors

MSD launch control module selectors are designed to help drag racers achieve more consistency while staging. MSD has incorporated an adjustable low-rpm stage selector with a 3-step module selector. They allow the driver to adjust his launch rpm in 100 rpm increments from the driver's seat, based on changes in track conditions.

5.0 out of 5 stars ( 3 )

$377.95

MSD Pro-Billet Cam Sync Distributors

Are you running an aftermarket fuel injection system and looking for a top-notch distributor that actually works? If so, these MSD Pro-Billet Cam Sync distributors are just what you need. They're designed to work with EFI management systems that fire the fuel injectors in the same order as the engine's firing order. They require a sync signal to know when the number one cylinder is firing and feature an adjustable sync pickup so you can set it to match your ECU's requirements (up to 60 degrees BTDC). This sync pickup uses a powerful, rare-earth magnet for strong trigger signals, and the wiring is routed through a weathertight connector for a positive-locking sealed connection. Each distributor housing is CNC-machined from billet 6061-T6 aluminum, creating a strong, precise housing. The rotor features thick vanes to stir up the air and is injection-molded from Rynite for high dielectric strength. A 0.500 in. polished steel shaft spins the rotor and is guided by a sealed ball bearing at the top and an extra-long sintered bushing at the bottom for added stability. These distributors are ready to drop in your race engine, from the bronze gear to the brass terminals of the cap. Chevrolet models have an adjustable slip collar that allows you to accurately set the distributor's installation depth in the engine. An MSD crank trigger, ignition control, and MSD 6, 7, 8, or 10 Series ignition must be used.

Not Yet Reviewed

$819.95

—

$1,075.95

MSD 6-MOD Ford Modular Engine Controller

The 6-Mod Ignition Controller was originally developed for the 4.6 and 5.4-liter modular motors that were fed through a carburetor rather than an electronic fuel injection system. However, with the useful options that the 6-Mod provides, such as two rev limits, a step retard and easy control over the timing, the EFI people wanted a way to take advantage of the adjustment. The harness kit provides a splice-free installation of the MSD 6-Mod Controller to factory equipped EFI vehicles making installation a snap. All of the connectors plug directly to the factory units so there is no cutting or splicing of your factory wires. Once installed, the 6-Mod allows users to advance or retard the factory's timing curve, program a step retard for use with nitrous systems or even map out a timing curve through a laptop by using MSD's Pro-Data+ software.

4.5 out of 5 stars ( 4 )

$921.95

MSD Powersports Launch Masters

These MSD Powersports Launch Masters are universal low-rpm limiters that provide consistent launches and quicker 60 ft. times by setting an rpm limit to stage with. Once the green light comes on, release the clutch and take off, but be sure to hold on! The rpm is adjusted with two built-in rotary dials ranging from 1,800 to 9,900 rpm in 100 rpm increments. MSD Powersports Launch Masters feature a handy LED to show you when your launch rev limit is active.

5.0 out of 5 stars ( 4 )

$330.95

On Sale

MSD Manual Launch Controllers

These MSD manual launch controllers let you change the launch rpm setting of MSD's programmable controls. The controllers allow you to make last-minute changes due to track conditions. They plug right into your MSD ignition control computer harness and have two rotary dials for adjustment.

5.0 out of 5 stars ( 1 )

$224.95

$172.95

—

$317.95

MSD LED Shift Lights

MSD compact LED shift lights feature a small design that fits neatly onto a steering column or on top of a dashboard, without blocking your line of sight. Their bright LED will alert you to shift at your desired rpm point without being obtrusive, but will illuminate bright enough to be easily seen in the daylight. They plug directly into MSD's line of Programmable Digital Ignition Controls via two wires, or they can be used with factory or other aftermarket ignition systems through an rpm-activated switch.

4.11 out of 5 stars ( 9 )

$161.95

MSD Launch Masters

These MSD Launch Masters connect right to your late model Ford to produce consistent launches and quicker 60 ft. times by setting an rpm limit to stage with. When the MSD Launch Masters are activated, the rpm will be held steady. Once the green light comes on, release the clutch and take off, but be sure to hold on! The Launch Masters' rpm is adjusted with two built-in rotary dials ranging from 1,000-10,900 rpm in 1,000-rpm and 100-rpm increments. A handy LED shows when the launch rev limit is active.

3.91 out of 5 stars ( 11 )

$357.95

MSD Coil Current Boosters

MSD coil current boosters provide added power to your Ford coil-on-plug engine to support additional horsepower. They also provide a 2-step rev limiter to consistently launch your car off the line. The MSD boosters increase the peak current at the ignition coil and spark energy at the plug gap, making them ideal to support engines with increased cylinder pressure from bumped-up compression ratios, a shot of nitrous, or boosted applications. The 2-step rpm adjustments are made via two rotary switches adjustable from 1,000 to 10,900 rpm, in 100 and 1,000 rpm increments. Just plug them in to the factory wiring and hook up the activation wires as needed and you're set. MSD coil current boosters feature: * Increased current at the ignition coil * Increased spark energy at the spark plug * Built-in 2-step rev limiter for consistent launches and quick 60 ft. times * Quick, easy solution to increase ignition power on Ford modular engines * Factory-style wiring connectors plug directly into stock coils and harness

Not Yet Reviewed

$649.95

On Sale

MSD Boost Adjustable Fuel Pressure Regulators

MSD boost adjustable fuel pressure regulators are designed for turbo or supercharged engines. As boost pressure increases, more fuel is required by the engine. These regulators feature a boost reference circuit that adds more fuel in relation to boost pressure. They're easy to install inline, and most units perform in a range up to 90 psi. A performance innovator for decades, MSD is the preferred choice for aftermarket ignition parts throughout the racing industry.

5.0 out of 5 stars ( 2 )

$377.95

$283.95

MSD Pro 600 CDI Ignition Boxes

MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$2,049.95

MSD Soft Touch Rev Controllers

There are two ways to limit your rpms. The rough way simply cuts off ignition spark, which can cause backfiring, extreme engine roughness, and possible engine damage. The gentle way is with these MSD Soft Touch rev controllers. They use sophisticated computer circuitry to drop spark one cylinder at a time, until your engine is at or below its maximum rpm. Those cylinders are then fired on the next cycle, to prevent them from loading up with fuel. The result is smooth rev limiting action without all the rough stuff. There are two versions of the Soft Touch rev controllers--one for MSD's 6T, 6TN, 6HVC ignitions, and one for OEM electronic and points ignitions. Both come with 6,000, 7,000, and 8,000 rpm plug-in modules, and can be used with other modules or MSD's RPM module selector.

4.33 out of 5 stars ( 15 )

$249.95

—

$281.95

MSD Advance Kits

These MSD advance kits are the same kits that come with your MSD distributor. The kits include the needed components to make your distributor perform like it did when it was brand new.

4.81 out of 5 stars ( 145 )

$11.97

—

$54.39

80 Results Found For "Adjustable"