Availability
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 444 )
$55.85
—
$66.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1981 )
$143.95
—
$176.95
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 436 )
$70.75
—
$81.05
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$635.95
—
$870.95
MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Coil bracket -- Uses a bolt/nut combination instead of the easily stripped self-tapping screw * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector
( 2 )
$767.95
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 405 )
$449.95
—
$637.95
MSD billet distributors are one of the finest street performance and racing distributors available. The distributor housings are precision-machined on CNC lathes from billet 6061-T6 aluminum to within +/- 1/1,000 in., producing a housing that's stable, lightweight, and less prone to flex. They feature an upper-sealed ball bearing to guide the distributor shaft and prevent shaft wobble at high rpms, and O-rings at the bottom of the base for improved oil control. The shaft is polished and QPQ-coated to minimize friction and allow the distributors to operate through 10,000 rpm. An adjustable mechanical advance assembly allows you to accurately and easily modify the advance curve to match your specific application. MSD premium distributors come complete with a race rotor and alkyd cap.
( 84 )
$460.95
—
$539.95
MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.
( 33 )
$145.95
—
$161.95
MSD Pro-Billet distributor plugs with cam sync are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a Hall-effect cam sync signal needed for the EFI system to reference the #1 cylinder. For wet sump applications, the plug also drives the oil pump. MSD cam syncs are plug-and-play with Holley EFI systems, and can easily interface with most aftermarket EFI systems. MSD cam sync plugs feature: * Built-in LED makes set-up and indexing quick and easy * Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal * CNC-machined billet housing with black anodized cap provides good looks and excellent durability * Available with cast melonized, steel, or bronze distributor gear, depending on the application * Chevrolet version is supplied with an adjustable slip collar for blocks with a non-standard deck height
( 8 )
$379.95
—
$409.95
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$562.95
—
$716.95
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$93.05
—
$93.15
Having a huge blower mounted on top of your engine is cool, but it can lead to limited choices for a distributor. The same goes for tri-power carburetor setups and big air cleaner assemblies, so MSD decided to morph their crab cap crank trigger distributor with a standard Chevy model to come up with a flat-top model! These MSD Flat-Top Pro-Billet distributors sit low in the engine block, and are topped with MSD's special crab cap that positions the spark plug terminals horizontally to give you plenty of clearance. These distributors incorporate a mechanical advance assembly that you can easily tune with the supplied springs and stop bushings. For trigger accuracy, a maintenance-free magnetic pickup is used. This pickup plugs directly into an MSD ignition control. The Flat-Top Pro-Billet distributors are supplied with a Dupont Rynite-molded distributor cap and rotor, along with a heavy-duty gear for long life in your engine.
( 9 )
$649.95
—
$716.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 242 )
$599.95
$399.70
—
$614.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 52 )
$614.95
—
$665.95
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$972.95
—
$1,299.95
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 138 )
$54.05
Get your race car going faster with MSD DynaForce high-speed starters! With 25 percent more cranking speed and extreme durability, they will reliably start your stubborn race engine. Designed for engines requiring higher cranking rpm to start, these starters offer 3.73:1 gear reduction. They also feature a heavy-duty, high-temp solenoid for 12 to 16 V systems, a plated disc and contacts to reduce arcing, and an adjustable billet aluminum mounting block. When you need higher cranking speed at the track for your blown alcohol engine or magneto ignition, MSD DynaForce high-speed starters will get you movin'--fast!
( 14 )
$767.95
On Sale
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$579.95
$329.95
—
$599.95
On Sale
MSD timing pointers are CNC-machined from 6061-T6 billet aluminum. These adjustable pointers are fully machine lightened; and each of the main bodies—as well as adjustment assemblies—are black anodized for long-lasting corrosion protection. They are built as direct-fit components, and various part numbers are available to fit multiple-size balancers. MSD timing pointers are designed to work on small block Chevy, big block Chevy, and small block Ford engines. They have a 4-degree range of movement for you to find the precise timing location. Stainless steel hardware is also included.
( 44 )
$111.95
—
$112.95
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 60 )
$47.24
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$2,049.95
MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.
( 20 )
$460.95
—
$539.95
MSD's distributor hold-down clamps are strong enough to keep the timing locked in place whether you are using an MSD billet distributor or Pro-Mag. These MSD hold-down clamps are precision-made and fit all MSD Pro-Billet Chevrolet distributors and the Pro-Mags. Each of these clamps includes a mounting stud, lockwasher, and nut.
( 24 )
$89.15
MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.
( 16 )
$716.95
—
$819.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
