Availability
On Sale
These new MSD programmable digital 6AL-2 ignition boxes give you the ability to tune an ignition curve or boost timing map from a PC. You still receive the 20 degree duration of multiple sparks combined with higher output to ensure complete combustion. The all-new MSD programmable digital 6AL-2 ignition boxes will easily connect to nearly any 12 V negative ground distributor system, even Hall-effect pickups. They offer higher output with up to 135mJ and 535 V and accept points and mag pickup triggers.
( 46 )
$549.99
$494.99
On Sale
MSD 6EFI ignitions are capacitive discharge ignitions designed to work in harmony with electronic fuel injection systems. They come with detailed wiring instructions, making installation a breeze. Increased throttle response, smoother idle, quicker starts, and full ignition power throughout the entire rpm range are all benefits of adding these ignition controls to your fuel injected engine. They feature built-in rev limiters that will protect the engine in the event of a missed shift or driveline failure. If you have a 4, 6, or 8-cylinder engine with EFI, MSD 6EFI ignition controls will connect and fire it up! MSD 6EFI ignitions feature: * Detailed instructions for installation with various EFI systems * Compact design * Adjustable rev limiter for over-rev protection with rotary dials in 100 rpm increments * Works on 12 V electrical systems using a distributor * Easily connects to magnetic pickup, electronic, and even points distributors
( 10 )
$229.99
$206.99
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$127.95
—
$995.95
$92.59
—
$699.95
On Sale
MSD Ignition waterproof relay harnesses are ideal for use on electric fuel pumps, water pumps, cooling fans, off-road lights, and any other application that is exposed to muddy or wet conditions. Each is built with rugged connectors and pigtail harness with long leads and heavy-duty gauge wire. The connectors have wires molded in rubber and a gasket for a leak-proof seal. Features: * Waterproof relay with pigtail harness and sealed connector * Metal bracket for mounting underhood or just about any other location * Ideal for marine, dirt track cars, and off-road trucks and Jeeps * Works in normally open or normally closed circuits
( 10 )
$34.17
$22.21
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 640 )
$172.95
—
$499.95
$112.95
—
$324.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 621 )
$80.49
—
$732.95
$44.27
—
$476.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 239 )
$526.95
—
$641.95
$302.21
—
$402.95
On Sale
MSD launch control module selectors are designed to help drag racers achieve more consistency while staging. MSD has incorporated an adjustable low-rpm stage selector with a 3-step module selector. They allow the driver to adjust his launch rpm in 100 rpm increments from the driver's seat, based on changes in track conditions.
( 3 )
$368.95
$239.95
On Sale
If you're upgrading the intake manifold on your LS engine, then you'll also want one of these MSD Atomic throttle bodies. They feature a parabolic design for precise control, smoother off-idle response, and improved part-throttle drivability. The throttle bodies are manufactured from billet aluminum, with a stainless steel shaft and contoured inlet profile—which outflows the competition's big bore throttle bodies. A robust throttle cam assembly uses a 3-plate design for smooth operation, while the dual ball bearing shaft offers less shaft twist and better signal stability.
( 2 )
$999.95
—
$1,349.95
$549.95
—
$742.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$275.95
—
$699.95
$151.95
—
$389.95
On Sale
MSD digital shift lights can be installed on everything from 1-cylinder points-triggered engines to Modular Ford engines with coil-on-plug technology. The tiny digital controller inside of the compact housing gives you the ability to program the rpm activation points through the easy-to-view LED panel and two programming buttons. When the engine reaches the activation rpm, the six red LEDs illuminate brightly enough to alert your senses to throw the shifter at the exact rpm. You can even program up to four different rpm values for different gears! MSD digital shift lights can be installed on up to 12-cylinder engines on stock ignitions or high-powered aftermarket systems.
( 27 )
$330.95
$182.95
On Sale
Get your race car going faster with MSD DynaForce high-speed starters! With 25 percent more cranking speed and extreme durability, they will reliably start your stubborn race engine. Designed for engines requiring higher cranking rpm to start, these starters offer 3.73:1 gear reduction. They also feature a heavy-duty, high-temp solenoid for 12 to 16 V systems, a plated disc and contacts to reduce arcing, and an adjustable billet aluminum mounting block. When you need higher cranking speed at the track for your blown alcohol engine or magneto ignition, MSD DynaForce high-speed starters will get you movin'--fast!
( 12 )
$749.95
$412.95
On Sale
MSD's Pro-Billet front drive distributors are the solution for race engines that don't have room for a standard distributor, due to firewall clearance or intake combinations. They're run by a wide 9mm belt that is driven by a pulley installed on the camshaft. The belt is wider than any other drive assembly for increased strength and durability. The distributor head is CNC-machined from billet aluminum and is secured to a stout billet aluminum bracket for strength. This system is an extremely accurate way to distribute the spark energy in harsh racing conditions. The distributors have a built-in belt adjustment feature for easy tension adjustments, and a band clamp mount for easy rotor phasing adjustments. They include MSD's Pro-Cap that is injection-molded from Dupont Rynite material for high dielectric strength, and the five in. diameter ensures accurate spark delivery. The distributors are supplied with mounting bolts, a cam pulley, hardware, and a drive belt. They must be used with a Jesel camshaft belt drive kit and an MSD Flying Magnet crank trigger.
Not Yet Reviewed
$1,099.95
$604.95
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 328 )
$649.95
$357.95
On Sale
These coils are designed to work with your MSD Digital CPC ignition system. They're direct replacements, so you can be assured of continued accuracy at any rpm, and consistent performance from your setup.
( 2 )
$99.95
$64.97
On Sale
Whether you need a high output alternator for your musclecar, street rod, or touring machine, MSD Dynaforce alternators have you covered. They are designed for maximum output from idle to high rpm. They feature a stator and rotor that are electrically balanced for optimum performance and their charge post is moved to the side of the housing to allow for improved clearance to the block. A pulley baffle is also included to ensure that there are never any fan-to-belt issues. MSD Dynaforce alternators are available in 50, 120 and 160 amp outputs and feature one-wire installation to keep things clean, easy, and effective. When it comes to equipping your ride with a high-quality alternator, MSD Dynaforce alternators bury their competition.
( 6 )
$568.95
$369.95
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 402 )
$549.95
—
$749.95
$302.95
—
$412.95
On Sale
Hoop up your Atomic TCU with MSD Atomic transmission control module harnesses. They are designed to fit your specific transmission model and have the proper wiring connector for a direct fit.
( 7 )
$299.95
—
$329.95
$164.95
—
$181.95
On Sale
MSD Ignition's Multiple Spark Coils (MSC) will fit in place of the stock GM LS coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy sparks, crowned with MSD's multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!
( 26 )
$149.95
—
$1,078.95
$112.46
—
$733.46
On Sale
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts. They are designed as direct bolt-in replacement coils for many SOHC Ford V8 modular engines. The housing and installation are the same as the factory coils, but that is where the similarity ends. Inside the MSD coil packs, engineers used better quality materials to assemble the primary and secondary windings. The MSD Ford Blaster Coil-on-Plug ignition coil packs take the spark energy right out of the coil and put it across the plug gap to improve the combustion and output of the engine.
( 364 )
$59.25
—
$399.95
$38.51
—
$299.95
On Sale
MSD timing pointers are CNC-machined from 6061-T6 billet aluminum. These adjustable pointers are fully machine lightened; and each of the main bodies—as well as adjustment assemblies—are black anodized for long-lasting corrosion protection. They are built as direct-fit components, and various part numbers are available to fit multiple-size balancers. MSD timing pointers are designed to work on small block Chevy, big block Chevy, and small block Ford engines. They have a 4-degree range of movement for you to find the precise timing location. Stainless steel hardware is also included.
( 42 )
$71.99
—
$110.95
$39.59
—
$61.95
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 514 )
$61.69
$33.93
On Sale
You use MSD parts in your ride. Now show it in pride with these MSD decals.
( 15 )
$1.99
$1.79
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 131 )
$16.62
—
$39.50
$10.80
—
$21.73
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
