Availability
On Sale
MSD launch control module selectors are designed to help drag racers achieve more consistency while staging. MSD has incorporated an adjustable low-rpm stage selector with a 3-step module selector. They allow the driver to adjust his launch rpm in 100 rpm increments from the driver's seat, based on changes in track conditions.
( 3 )
$368.95
$239.95
On Sale
Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. The kits include five modules in 200 rpm increments.
( 68 )
$123.95
$68.95
On Sale
MSD offers replacement wiring harnesses for the Power Grid Dual NTK wideband oxygen module—a dual channel air/fuel ratio (AFR) system designed to interface with the Power Grid (P/N 7730) to monitor and record the AFR of internal combustion engines. The oxygen sensor module is capable of measuring AFR as low as ? = 0.5 (7.35:1 gasoline AFR equivalent). The AFR range is configurable using the MSDView software in conjunction with the Power Grid Controller (P/N 7730). Excellent MSD range of the NTK sensor gives each unit the ability to accurately monitor AFR's even on alcohol cars. The MSD wideband oxygen sensor module also provides a 0.5-4.5 VDC analog output proportional to the AFR. This analog output can be sent to a gauge or a data acquisition system. A dual-color LED provides the system status at a glance. (To provide accurate backpressure compensated AFR readings on turbocharged applications, the addition of an Exhaust Pressure Module, part number 7767, is required.) MSD can provide a replacement main harness, sensor 1 harness, or sensor 2 harness for your application. Order the model needed to restore proper performance to your vehicle.
( 1 )
$65.35
$35.94
On Sale
Get on the performance grid with MSD Ignition Power Grid power modules. When connected to the Power Grid, they will data log all the functions--including time from launch and time or rpm of activation and deactivation. These timing controllers feature four high-current, solid-state switches that can be configured independently or in conjunction by time, rpm, and temperature switching on/off, as well as by percentage for nitrous systems. Each channel is capable of handling 20 amps of current without the use of a relay and can be used to activate fan, fuel pump, nitrous oxide system, throttle stop, and more--the possibilities are endless.
( 1 )
$749.95
$412.95
On Sale
Hoop up your Atomic TCU with MSD Atomic transmission control module harnesses. They are designed to fit your specific transmission model and have the proper wiring connector for a direct fit.
( 7 )
$299.95
—
$329.95
$164.95
—
$181.95
On Sale
MSD Power Grid exhaust module sensors are offered as replacements and enhancements for your module. Maintain the ability to obtain accurate data with replacement 0 to 75 psi exhaust back pressure sensors, or expand your module's abilities by adding an optional second pressure sensor with harness for dual turbo applications. Keep the operation of your Power Grid exhaust module at an optimum level with genuine MSD accessory sensors.
Not Yet Reviewed
$147.95
$110.95
On Sale
MSD Power Grid exhaust module replacement pressure sensor harnesses keep your module operating at optimum levels. These wiring harnesses are available for both sensor 1 and 2. For the best performance from your Power Grid module, choose genuine MSD replacement pressure sensor wiring harnesses.
Not Yet Reviewed
$33.63
$18.50
On Sale
MSD digital multi-retard timing controls provide four different stages of retard, along with an adjustable start retard feature--with no modules! These units use a high-speed RISC micro-controller to direct the timing functions. This controller can make extremely quick compensations to the timing, while maintaining accuracy to within 1 degree. These circuits are thoroughly de-bounced and isolated for protection against Electro Magnetic Interference (EMI). There is also an innovative magnetic pickup compensation circuit built-in to allow for rock-steady timing with a variety of different mag pickups. There are four separate retard stages that can be activated independently or together for a total sum of retards. Each stage is adjustable from 0-9 degrees, and a maximum of 20 degrees of retard can be pulled out. On top of these great features, there is also an optional start retard circuit that can be programmed to retard the timing 5, 10, 15, or 20 degrees during cranking. Digital multi-retard timing controls can be used on 4, 6, or 8-cylinder engines, and must be used with an MSD ignition control.
( 2 )
$499.95
$274.95
On Sale
Level the playing field, cut and dried, black and white—no matter how you put it, the MSD Race Ignition Test Tool easily allows tech officials to plug-in to competitors ignition units to verify everyone is playing by the rules. The tester can be programmed by a sanctioning body or race track with their master file by which racers are mandated to comply. Circle Track Officials can choose regulated parameters such as max RPM rev limit, timing curve, and coil type to regulate when using the MSD 6014CT Circle Track LS Ignition Control. Drag Race Tech Officials can plug into the MSD Power Grid, part number 7730, and monitor the ARC Module timeout feature, the safety RPM feature, and the safety timeout feature. It will also display the part numbers and serial numbers of all modules connected to the Grid. A special version of this unit will be available for NHRA Tech Officials to verify compliance of Top Fuel and Funny Car units. Features: * Quickly plug-in to competitors' ignition to test rule compliance * Works only with Circle Track LS Ignition Control P/N 6014CT, Power Grid Controller P/N 7730 and 77303 * Special version available for NHRA Tech Officials only to test Top Fuel and Funny Car units * User-friendly plug-and-play design
Not Yet Reviewed
$222.95
$122.95
On Sale
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$549.95
—
$579.95
$302.95
—
$318.95
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 327 )
$649.95
$357.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
