Availability
On Sale
If you run a blower, turbo, or even a naturally aspirated engine, MSD's Boost Timing Masters allow you to run at the edge of detonation for maximum power output. They can prevent detonation by automatically retarding the timing as your manifold pressure increases. The secret lies in a boost pressure sensor that's inside MSD's solid-state control box. The sensor reads boost pressure through a 1/8 in. vacuum hose attached to a boost pressure source. The result gives you peak power without harmful detonation. A dash-mounted control knob allows you to dial in the retard from 1 to 3 degrees per pound of boost pressure, up to a maximum retard of 15 degrees. Vacuum tubing is not included. These units must be used with an MSD 6, 7 or 8 series ignition.
( 6 )
$926.95
$833.95
On Sale
The 6-Mod Ignition Controller was originally developed for the 4.6 and 5.4-liter modular motors that were fed through a carburetor rather than an electronic fuel injection system. However, with the useful options that the 6-Mod provides, such as two rev limits, a step retard and easy control over the timing, the EFI people wanted a way to take advantage of the adjustment. The harness kit provides a splice-free installation of the MSD 6-Mod Controller to factory equipped EFI vehicles making installation a snap. All of the connectors plug directly to the factory units so there is no cutting or splicing of your factory wires. Once installed, the 6-Mod allows users to advance or retard the factory's timing curve, program a step retard for use with nitrous systems or even map out a timing curve through a laptop by using MSD's Pro-Data+ software.
( 4 )
$899.95
$808.95
MSD Ignition 12 amp electronic points boxes control the spark duration and the unique full power firing sequence of several magneto units, including the Pro Mag 12, Pro Mag 12LT, and Pro Mag 20. The energy from the generator is controlled with Field Effect Transistor (FET) technology, which is far superior to mags still using points as a trigger source. FETs are considerably more accurate and durable—and are capable of handling much more current. This is why the Pro Mag can deliver full energy sparks throughout the entire rpm range of the engine, while conventional magnetos fall short of full power at high racing rpm. Plus, these advanced points boxes keep each spark glowing for up to 26 degrees of crankshaft rotation.
( 1 )
$999.95
On Sale
MSD 7AL-2 Plus CD ignitions have all the features of the standard 7AL-2 with the addition of a 2-step rev control and a new diagnostic LED to deliver their full power at any rpm. Their multiple spark discharge circuitry gives better throttle response, off-corner performance, smooth idle, and more consistent launches. Their built-in soft touch rev control protects your engine from damage due to over-revving and they feature accurate rev-limiting action that's smooth, without backfires or roughness, and adjustments are easily made with plug-in modules. They can be triggered from points, magnetic pickups, crank triggers, and electronic amplifiers. MSD 7AL-2 Plus CD ignitions are available for 4, 6, and 8-cylinder engines. From NHRA to Circle Track, they're proven winners.
( 19 )
$849.95
$763.95
On Sale
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,099.95
$988.95
On Sale
MSD Digital E-Curve distributors will drop right into your engine and fire up with three simple connections! Not only are there no external controls or boxes to mount and connect, but you can set a timing curve with the twist of a rotary dial! That's right, no more springs or stop bushings to fumble with. A new digital module lets you select from 20 different "centrifugal" curves and five vacuum curves--that's 100 combinations! Simply remove the cap to access the rotary dials and select a curve to match your application. You can also set an rpm limit that will protect your engine from over-rev damage caused by a missed shift or driveline failure.
( 36 )
$849.95
$763.95
—
$849.95
On Sale
MSD Atomic transmission control modules are designed to adjust the operating parameters of later model electronically controlled 4-speed automatic overdrive transmissions. They're simple to configure with the supplied hand-held monitor--no PC required. You now have access to adjust shift points, adjust torque converter clutch behavior, select different levels of shift firmness, select between auto-shift and manual shift mode, and activate dyno mode to deliver repeatable chassis dyno results. The included hand-held monitor connects to them and can be left in place as a dashboard to monitor the transmission in real time, or can be disconnected when the configuration is complete. Once installed, these modules need only a few basic parameters to complete the initial setup. First, select the type of transmission you are using--all supported transmission types are listed in the menu. Other required fields include the number of engine cylinders, rear-end gear ratio, and tire height. Once this has been completed, you can now start and drive the vehicle, while taking advantage of the advanced setup menu items to dial-in the transmission to your liking. You can feel the results in real-time as a passenger manipulates the parameters and monitors the real-time data. Data available for viewing includes engine speed, vehicle speed, throttle position, transmission fluid temperature, shifter position, and commanded gear. Best of all, the MSD Atomic transmission control modules are available as completely stand-alone units or Brainwave-compatible for the Atomic EFI systems. A transmission controller harness is sold separately.
( 19 )
$899.95
$808.95
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$1,099.95
$988.95
On Sale
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$949.95
—
$999.95
$853.95
—
$898.95
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$849.95
$763.95
On Sale
MSD programmable Midget ignitions help deliver every ounce of power from your Midget engine. They're a complete electronic distributorless system with a powerful capacitive discharge ignition control, and a four-tower, high output coil pack that uses two non-magnetic pickups with a trigger wheel. MSD has taken all of the mechanical variables out of the picture and given you exact ignition timing for more power, more control, and more performance. You can precisely program the timing throughout the engine's entire rpm range. Their programmable features include the ability to: Plot two timing curves ranging from 800-15,000 rpm in 0.1 degree increments, program a start retard for easier timing, select a rev limit from 2,000-15,000 rpm in 100 rpm increments, and switch between two timing curves as track conditions change during a race! These features can be programmed from a PC with MSD's Pro-Data+ software, or with the available hand-held monitor.
Not Yet Reviewed
$1,449.95
$942.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
