Availability
MSD 7AL-3 ignition boxes have been a favorite of sportsmen and racers that want adjustments at their fingertips. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus there's an RPM Activated Switch for precise control over a circuit. These ignitions combine high-output spark energy for high-compression race engines, combined with the most popular drag racing accessories, including a 3-step rev limiter, 4-stage retards, a start retard, and an rpm-activated switch. MSD is re-launching the 7AL-3s with upgraded features, a new look, and updated internal components, including surface mount circuitry. The new 7AL-3s are easy to spot with a black anodized housing and a new adjustable start retard circuit. Racers will also be happy to learn that the ignition can now be used on 4, 6, or 8-cylinder engines! Additional features include: * Fits the same mounting footprint as the original 7AL-3 * Start retard is adjustable with plug-in retard modules * Retard stages require positive 12 V to activate * Surface mount assembly reduces internal components
( 30 )
$1,126.95
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,126.95
When you're serious about power for your LS or new LT1 engine, call in the AirForce! MSD Atomic AirForce intake manifolds have been designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient paths for improved airflow and distribution to stock and modified engines. Their unique bell-mouthed runner entrances maximize airflow and minimize shrouding--efficiently using the available plenum volume for an unobstructed flow path over opposing runners. The 2-piece molded polymer design resists heat soak, minimizes weight, and allows easy access to the runners for porting. MSD Atomic AirForce intake manifolds accept an OEM or 103mm throttle body, as well as stock, aftermarket, or Atomic LS EFI fuel rails. They are supplied with new gaskets and hardware for a direct bolt-on package. The 103mm throttle bore allows the use of large throttle bodies for greater airflow, and a direct-flow path runner design promotes maximum airflow.
( 19 )
$1,399.95
—
$1,449.95
MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$1,229.95
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$1,126.95
—
$1,299.95
MSD Pro Mag 44 ignition coils are a key part of MSD's Mag 44 ignition system for pro-level drag cars. There's more than a pound of high-quality copper wire wound around the molded DuPont Rynite core in every one, which allows them to handle the 44 amps of output from the system's companion magneto. These coils deliver 50,000 V of long-duration spark to the plugs to ensure that the nitro is ignited. For maximum vibration protection and reliability, the windings and all internals are completely wrapped in rugged epoxy. They're not for use with the Pro Mag 12.
Not Yet Reviewed
$1,229.95
—
$1,449.95
When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.
( 41 )
$1,024.95
—
$1,126.95
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$1,449.95
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$1,024.95
—
$1,299.95
MSD's Pro-Billet front drive distributors are the solution for race engines that don't have room for a standard distributor, due to firewall clearance or intake combinations. They're run by a wide 9mm belt that is driven by a pulley installed on the camshaft. The belt is wider than any other drive assembly for increased strength and durability. The distributor head is CNC-machined from billet aluminum and is secured to a stout billet aluminum bracket for strength. This system is an extremely accurate way to distribute the spark energy in harsh racing conditions. The distributors have a built-in belt adjustment feature for easy tension adjustments, and a band clamp mount for easy rotor phasing adjustments. They include MSD's Pro-Cap that is injection-molded from Dupont Rynite material for high dielectric strength, and the five in. diameter ensures accurate spark delivery. The distributors are supplied with mounting bolts, a cam pulley, hardware, and a drive belt. They must be used with a Jesel camshaft belt drive kit and an MSD Flying Magnet crank trigger.
Not Yet Reviewed
$1,126.95
—
$1,177.95
MSD Ignition 12 amp electronic points boxes control the spark duration and the unique full power firing sequence of several magneto units, including the Pro Mag 12, Pro Mag 12LT, and Pro Mag 20. The energy from the generator is controlled with Field Effect Transistor (FET) technology, which is far superior to mags still using points as a trigger source. FETs are considerably more accurate and durable—and are capable of handling much more current. This is why the Pro Mag can deliver full energy sparks throughout the entire rpm range of the engine, while conventional magnetos fall short of full power at high racing rpm. Plus, these advanced points boxes keep each spark glowing for up to 26 degrees of crankshaft rotation.
( 1 )
$1,024.95
MSD Pro Mag 44 electronic points boxes are responsible for controlling the Pro Mag 44's energy, such as the special long duration spark and quick rise time. They feature electronic circuitry that replaces the breaker points. This allows the power of the generator to be released to the coil instantly and at full power. The boxes keep the electricity flowing across the plug for a full 26 degrees of crankshaft rotation, ensuring complete combustion, and they are available with an optional rev limiter.
Not Yet Reviewed
$1,349.95
DIS-4 Plus HO digital ignitions are higher-output versions of the DIS ignition controls from MSD. They're designed for full race engines running high boost pressures from turbos, blowers, or nitrous. Their increased output will light up fuel mixtures even under these extreme cylinder pressures. Your late model distributorless ignition system will never be the same! The capacitive discharge ignitions feature multi-channel capability, complemented with multiple sparks, two rev limiters, and a timing control. These DIS ignitions are engineered with the latest in digital science, including power MOSFET technology and efficient IGBT coil drivers. They're managed by a 15 MHz micro-controller for extremely fast compensations and decisions. In the end, this creates incredibly accurate spark delivery, rev limiting, and timing functions. Throttle response and mid-range pull are also improved, due to a series of powerful multiple sparks that last for 20 degrees of crankshaft rotation. There is a two-step rev limiter, which gives you one limit to set for holeshots and another for top-end performance. For engines using nitrous or extremely high cylinder pressures, you can also program a high-speed retard after the engine hits total timing. Both of these features are easy to adjust with the new built-in rotary dials. They also feature an ignition interrupt that will prevent the engine from starting by disabling the output to the coil, a retard feature that retards the timing at the top end to prevent detonation, and an LED monitor that will alert you of a low supply of voltage or faulty input signals. Also, there is now a true step retard that can be activated through your nitrous solenoid wiring! The DIS-4 HO Plus digital ignitions are designed for 6 or 8-cylinder engines with three or four coil packs.
( 1 )
$1,229.95
These MSD Chevy crate engine ignition kits make it easy to add MSD performance to your new crate engine. They come available with MSD's Pro-Billet HEI distributor for applications that have enough room to take advantage of an internal coil and large distributor cap. For applications with limited firewall clearance, MSD offers a kit with their Pro-Billet Ready-To-Run distributor and powerful Blaster SS coil. Both kits include a set of universal 8.5mm Super Conductor wires, Pro-Clamp wire separators, and a billet hold-down clamp. They have everything you need to light the fire in your new crate engine!
( 18 )
$1,024.95
If you're assembling an aftermarket EFI system, then these MSD Pro-Billet hall effect cam sync distributors are for you! They offer a magnetic pickup to trigger the ignition, and they now have a new hall-effect pickup to set up the cam synchronization for most EFI systems. The MSD Pro-Billet hall-effect cam sync distributors also feature a special built-in LED that illuminates when the sync signal is detected, making setup simple. In addition, the distributors include an adjustable slip collar for compensation in engines with modified deck heights or custom intake manifolds. The MSD Pro-Billet hall effect cam sync distributors' small diameter cap keeps the distributors low in the engine for extra clearance, and a ball bearing guides the QPQ-coated shaft for stable operation through high rpm.
( 2 )
$1,126.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
