Availability
On Sale
The chrome plated MSD coil brackets offer easy, universal mounting for standard size ignition coils up to 2 1/4 in. diameter, including all MSD Blaster Coils.
( 113 )
$13.76
—
$15.74
$12.38
—
$14.17
On Sale
MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.
( 151 )
$32.91
$14.42
—
$18.10
On Sale
MSD ballast resistors are just the ticket to connect your MSD coil to your stock points ignition system.Connect your coils the safe and secure way with MSD.
( 34 )
$20.46
$18.41
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 131 )
$16.62
$10.80
—
$15.74
On Sale
MSD cylinder markers will not only save you time, but ensure that your plug wires will always be in the right place. They'll withstand underhood temperatures, they come with a tool that makes installation effortless, and they're available in two sizes.
( 25 )
$17.06
$15.35
On Sale
MSD's two pin connector kits replaces damaged connectors or aids in custom wiring. This is the same connector used on MSD's magnetic pickup harnesses. Each kit comes with two connectors and four pins.
( 16 )
$14.42
$12.98
On Sale
MSD Chevrolet distributor O-ring kits are designed to fit onto the lower shaft of the distributor, just above the gear. They are made of high-grade rubber and will keep the distributor shaft securely in place at operating rpm.
( 4 )
$21.05
$18.95
On Sale
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 103 )
$14.42
$12.98
On Sale
MSD mini-stripper crimpers allow you to create your own custom spark plug wires. They provide a "die" to strip either 8mm or 8.5mm wires, and can then be used in a vise to provide a solid terminal crimp to the wire. Finally, there's an inexpensive way to make a set of custom spark plug wires, thanks to MSD.
( 45 )
$17.06
$15.35
MSD module bypass cable assemblies allow you to plug an MSD 6 or 7 Series ignition or timing accessory directly into the magnetic trigger inside a GM HEI distributor.
( 12 )
$15.74
These MSD vacuum advance lockouts are designed to easily remove the vacuum advance chamber from MSD distributors that use a clockwise rotation. They are made of black plastic. No modifications are required to install the advance lockouts.
( 5 )
$15.74
On Sale
MSD retard modules are designed for use with MSD timing controls with retard features. They are available in several degree ranges to custom-tailor your ignition.
( 6 )
$11.78
MSD Atomic AirForce throttle body seals are made from high-quality silicone to create a tight seal. They are the perfect-fit replacements, just like the originals, for your MSD Atomic EFI AirForce intake manifold.
Not Yet Reviewed
$18.40
MSD AirForce manifold O-ring service kits offer direct replacement seals for your application. These O-rings are assembled to give you all the seals you need to complete your repair, transplant, or new installation. The kits are available in several configurations; order the model designed to fit your vehicle
Not Yet Reviewed
$18.40
The GM LS Series engines are being built for a lot of different performance and racing applications. You can see good ol' hot rodder ingenuity taking place as racers are running carburetors and even using distributors on these engines! These MSD LSx trigger converters plug into the factory crank sensor of an LS engine. They then convert the factory trigger signal into a 12 V square wave signal to trigger an MSD ignition control such as a 6 or 7 Series ignition control. If you are incorporating a front mount distributor into your LS engine, this means that you won't need to run an external crank trigger.
( 3 )
$19.13
In case you damage or misplace the fiber optic cable to your MSD spark plug wire sync kits, MSD offers this 12 ft. long optic cable as a quality replacement. These fiber optic cables are engineered to emit a clear signal to the power grid for individual cylinder timing, and are supplied with a yellow protective sleeve.
Not Yet Reviewed
$19.13
With these MSD Deutsch connectors, there's no excuse for losing a race due to poor wiring connections. Their compact housings are molded from durable plastic that will not harden or crack, and feature indexing tabs to prevent mismatching. The terminals grip the wire with strong crimp tabs that lock into position. The connectors use thick seals to keep water, mud, and debris away from the contacts, and they can handle more current than conventional connectors.
( 21 )
$19.71
MSD Weathertight sealed connectors are molded from a special nylon material to withstand temperatures from -40 to 257 degrees F and are indexed to prevent mismatching. Positive locks let you know when the connectors are joined correctly with an audible "click," while each terminal has its own tower—so there's no chance of shorting. And lastly, silicon seals prevent water, chemicals, and dirt from entering, for a truly reliable, maintenance-free connection.
( 5 )
$17.06
MSD coolant temperature sensors produce a variable resistance from -40 degrees F to 302 degrees F. They thread into a 3/8 in. NPT female hole and include a matching 2-pin Weatherpack connector for a reliable positive lock connection.
( 2 )
$13.66
On Sale
When you need ignition system components, you think of MSD Ignition. Their Digital-7 harnesses ensure incredible spark power, and when you need replacement wiring harnesses for your power boxes, MSD is the place. Frayed, burnt, and damaged wires need to be replaced. Keep your Digital-7 sparking with MSD replacement wiring harnesses.
( 3 )
$13.66
MSD terminal strips can be used for virtually any wiring installation to provide a clean, professional appearance. They feature four separate terminals to hold 12-gauge or smaller wires.
Not Yet Reviewed
$15.74
On Sale
MSD Weathertight replacement pins and seals keep the elements out and provide trouble-free electrical connection. The Weathertight connectors are molded from a special nylon material to withstand temperatures from -40 degrees to +257 degrees F and are indexed to prevent mismatching. Positive locks let you know when the connectors are completely joined by producing an audible 'click', letting you know that a solid connection has been made. These electrical connectors are unaffected by water, chemicals, vibration, temperature, and dirt, and will not come apart accidentally. Now you can always be prepared for your next wiring project with a supply of these replacement Weathertight wiring pins and seal connectors from MSD.
Not Yet Reviewed
$19.71
$10.84
MSD Atomic EFI fuel filters are high-quality inline replacements for your Atomic throttle body injection system. They're constructed using a durable stainless steel casing with hose barbs to connect each end. Pre-pump and post-pump filters are available, all designed to meet or exceed OE specifications for reliability and performance.
( 3 )
$19.13
On Sale
MSD Power Grid exhaust module replacement pressure sensor harnesses keep your module operating at optimum levels. These wiring harnesses are available for both sensor 1 and 2. For the best performance from your Power Grid module, choose genuine MSD replacement pressure sensor wiring harnesses.
Not Yet Reviewed
$33.63
$18.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
