Availability
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1974 )
$199.95
$107.05
—
$210.95
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 443 )
$54.45
$49.05
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 434 )
$79.09
$55.35
—
$71.75
On Sale
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 36 )
$122.95
$110.65
On Sale
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 60 )
$59.25
$53.35
On Sale
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
$160.15
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$49.95
—
$126.95
$44.95
—
$114.25
On Sale
MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.
( 20 )
$399.95
$359.95
On Sale
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 138 )
$47.77
—
$52.69
$42.99
—
$47.45
On Sale
These Extreme distributor caps from MSD are replacement covers designed to be installed on stock HEI distributor cams with no modifications.
( 8 )
$86.99
$78.25
On Sale
MSD 8.5 mm Race Tailored Super Conductor Wire Sets are designed to specifically fit race engines equipped with headers or MSD distributors. They feature wires that are custom cut to route behind the block, under the headers, and to the spark plugs. This routing gives the engine an extra clean appearance as well as protecting the wires from making contact with the engine. The wires have a special helically-wound core that has just 40-50 ohms of resistance per foot--but with the RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8.5 mm synthetic/silicone jacket over an extra heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, stainless steel terminals feature snap locks to assure a secure fit.
( 13 )
$210.95
$116.95
—
$199.95
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$52.69
—
$53.75
$47.45
—
$48.35
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 643 )
$92.25
On Sale
MSD modified HEI dust covers allow you to remove the stock HEI coil in your distributor cap and replace it with an externally mounted coil. By going with an external coil, you increase the reliability and performance of the stock HEI system.
( 9 )
$79.09
$71.15
MSD low-resistance HEI bushings prevent excessive heat buildup. The carbon rotor button in a stock HEI distributor cap has very high resistance. When the high voltage of an MSD 6, 7, or 8 Series ignition is added, this resistance builds up heat and can actually melt the distributor cap. To solve this problem, install one of these MSD low-resistance HEI bushings, which will pass the secondary voltage from the distributor cap to the rotor without the excessive heat buildup.
( 15 )
$23.66
On Sale
These MSD vacuum advance mechanisms are designed to replace the vacuum advance chamber on the MSD HEI distributor. They are made of steel and feature cadmium plating for maximum durability.
( 7 )
$39.50
$35.55
On Sale
MSD timing pointers are CNC-machined from 6061-T6 billet aluminum. These adjustable pointers are fully machine lightened; and each of the main bodies—as well as adjustment assemblies—are black anodized for long-lasting corrosion protection. They are built as direct-fit components, and various part numbers are available to fit multiple-size balancers. MSD timing pointers are designed to work on small block Chevy, big block Chevy, and small block Ford engines. They have a 4-degree range of movement for you to find the precise timing location. Stainless steel hardware is also included.
( 44 )
$73.79
$40.58
—
$77.15
These MSD vacuum advance lockouts are designed to easily remove the vacuum advance chamber from MSD distributors that use a clockwise rotation. They are made of black plastic. No modifications are required to install the advance lockouts.
( 5 )
$15.74
On Sale
MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.
( 151 )
$14.42
—
$32.91
On Sale
MSD's Pro-Billet front drive distributors are the solution for race engines that don't have room for a standard distributor, due to firewall clearance or intake combinations. They're run by a wide 9mm belt that is driven by a pulley installed on the camshaft. The belt is wider than any other drive assembly for increased strength and durability. The distributor head is CNC-machined from billet aluminum and is secured to a stout billet aluminum bracket for strength. This system is an extremely accurate way to distribute the spark energy in harsh racing conditions. The distributors have a built-in belt adjustment feature for easy tension adjustments, and a band clamp mount for easy rotor phasing adjustments. They include MSD's Pro-Cap that is injection-molded from Dupont Rynite material for high dielectric strength, and the five in. diameter ensures accurate spark delivery. The distributors are supplied with mounting bolts, a cam pulley, hardware, and a drive belt. They must be used with a Jesel camshaft belt drive kit and an MSD Flying Magnet crank trigger.
Not Yet Reviewed
$1,149.95
$1,033.95
MSD HEI coil dust covers are designed to protect your coil and top off your distributor's complete look. They are manufactured of high-impact Rynite and feature the standard red MSD color.
( 9 )
$59.25
If you're assembling an aftermarket EFI system, then these MSD Pro-Billet hall effect cam sync distributors are for you! They offer a magnetic pickup to trigger the ignition, and they now have a new hall-effect pickup to set up the cam synchronization for most EFI systems. The MSD Pro-Billet hall-effect cam sync distributors also feature a special built-in LED that illuminates when the sync signal is detected, making setup simple. In addition, the distributors include an adjustable slip collar for compensation in engines with modified deck heights or custom intake manifolds. The MSD Pro-Billet hall effect cam sync distributors' small diameter cap keeps the distributors low in the engine for extra clearance, and a ball bearing guides the QPQ-coated shaft for stable operation through high rpm.
( 2 )
$1,099.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
