Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Mr. Gasket Fuel Bowl and Metering Block Gaskets for Holley Carburetors
Available in matched pairs, or packed five per set, these gaskets are designed to fit Holley carburetor models. These gaskets are made from a rubber coated material designed to minimize swelling and withstand high underhood temperatures. Some carburetors within the same model series differ--check your particular carburetor to make sure you're getting the correct gaskets.
( 1 )
$17.05
On Sale
Mr. Gasket Fuel Pump Relays
Are you planning to run an electric fuel pump on your project vehicle? If so, then Mr. Gasket fuel pump relays will provide assurance that your fuel pump is receiving full voltage from the battery. These kits include a 30 or 40 amp relay and all necessary wiring to ensure that your installation goes smoothly. Some kits may include a circuit breaker and terminal ends. Mr. Gasket fuel pump relays can eliminate mysterious voltage drops that long wire installations can create.
( 6 )
$43.55
$39.20
On Sale
Mr. Gasket Advance Curve Kits
These curve kits allow your distributor to reach full advance more quickly (between 2,000 and 2,800 rpm), delivering maximum power and engine acceleration.
( 42 )
$16.40
$10.93
—
$22.73
Mr. Gasket Header Installation Kits
These kits from Mr. Gasket are complete header gasket and fastener installation kits. Mr. Gasket was the first to incorporate slotted mounting bolt holes at the ends of each exhaust gasket. This allows the gasket to be installed without removing the header flange entirely from the cylinder head, making installation faster and easier. Premium Ultra-Seal exhaust and collector gaskets provide excellent heat resistance, and conform to and seal minor surface irregularities. Mr. Gasket header and collector bolts provide the proper clamp-load to seal flange mating surfaces. All gaskets and fasteners necessary for header installation are included.
( 4 )
$60.85
On Sale
Mr. Gasket Throttle Return Spring Kits
These Mr. Gasket throttle return spring kits include springs and a chrome plated bracket. Finally, there is a piece that functions and looks good on any carb.
( 14 )
$17.23
$11.48
—
$38.71
Mr. Gasket Distributor Advance Kits
These Mr. Gasket distributor advance kits provide full advance between 2,000 and 2,800 rpm, giving you maximum power and engine acceleration. These kits contain all required weights, springs, and bushings.
( 9 )
$22.72
On Sale
Mr. Gasket Chrome Water Pump Pulleys
These Mr. Gasket chrome plated steel water pump pulleys are designed for Chevy big and small block engines with 5/8 in. water pump shafts. These pulleys are ideal for replacing your stock black pulleys. They feature a highly polished chrome finish for long-lasting beauty.
( 21 )
$192.95
—
$249.95
Mr. Gasket Battery Relocation Kits
Do you need to move your battery? Maybe you want a little added protection. Or maybe you just want a neater look. Whichever, Mr. Gasket battery relocation kits get the job done. Constructed from tough materials and will accommodate most standard size batteries and come with everything you need to relocate the battery to the trunk.
( 9 )
$204.95
Mr. Gasket Rocker Arm Stud Pinning Kits
These Mr. Gasket rocker arm stud pinning kits are designed to prevent rocker arm studs from loosening under higher pressures and rpm. They include a set of 16 steel roll pins and a special 5/32 in. drill bit to install them. Designed for use with press-in rocker arm studs, Mr. Gasket rocker arm stud pinning kits will keep your valvetrain accurate and reliable throughout the entire rpm range.
( 2 )
$35.59
Mr. Gasket Replacement Fan Mounting Kits
If you're looking to change the fan in your car, you might want to get the fan mounting kit from Mr. Gasket. These mounting kits make the job a lot easier, and they fit almost any electric fan, transmission cooler, or engine oil cooler.
( 2 )
$27.04
Mr. Gasket Engine Port Polishing Kits
Mr. Gasket engine port polishing kits will allow you to do your own detailed porting, polishing, and flashing removal on all engine parts, with the use of an electric drill. They are designed to work with both cast iron and aluminum components. They include one tapered cutting stone, one 1 in. diameter mini-grind flex flat wheel, 31 assorted polishing rolls, and three various-length mandrels.
( 4 )
$86.59
Mr. Gasket Street Scoop Conversion Kits
These Mr. Gasket Street Scoop conversion kits will allow your scoop top fit a variety of induction styles. They are available to convert the single Street Scoop to a dual carburetor setup, or a dual Street Scoop to a single 4-barrel application. The conversion kits come with all necessary mounting hardware and instructions.
( 4 )
$89.35
—
$177.95
On Sale
Mr. Gasket Engine Dress-Up Kits
Engine dress-up kits from Mr. Gasket are the ideal starter kits for customizing engines and enhancing the appearance of the engine compartment. All parts are chrome plated for lasting beauty.
Not Yet Reviewed
$146.85
$82.66
Mr. Gasket Grommet Assortment Kits
Mr. Gasket grommet assortment kits protect your wires from chaffing. These heavy-duty sets contain 30 (6 each of 5 different sizes) of the most popular rubber grommets used in automotive sheet metal applications. They feature extra-thick wall sections to insulate and protect your wires, cables, hoses, and the like from sharp sheet metal edges. Mr. Gasket grommet assortment kits include these sizes: 1/2 in., 5/8 in., 3/4 in., 7/8 in., and 1 in.
Not Yet Reviewed
$42.68
On Sale
Mr. Gasket Universal Throttle Cable Kits
These Mr. Gasket universal throttle cable kits contain all of the necessary hardware for a complete installation onto your carburetor. They feature a 36 in. long cable, wrapped with a 24 in. stainless steel braided sleeve, that can be cut to length to fit your specific application.
( 98 )
$46.44
$41.80
—
$76.15
On Sale
Mr. Gasket Carburetor Adapter Kits
Save yourself the hassle of purchasing a new, costly intake manifold by simply adapting your existing carburetor to fit your engine. These high-performance carb adapter kits from Mr. Gasket install quickly and easily, and include all of the gaskets, studs, nuts, and washers you'll need to complete the job.
( 85 )
$37.66
$31.83
—
$38.71
Mr. Gasket Chrome Engine Bolt Kits
Mr. Gasket's chrome engine bolt kits contain all of the bolts that you need for your engine. These bolts feature a beautiful chrome finish for a show-ready look.
Not Yet Reviewed
$215.95
On Sale
Mr. Gasket Fuel Pressure Gauge/Inline Adapter Kits
Mr. Gasket fuel pressure gauge/inline adapter kits allow you to easily install a fuel pressure gauge inline almost anywhere. The gauge reads in 1/2 psi increments with a range of 0 to 15 psi and are available in standard or liquid filled versions. The gold anodized aluminum inline fuel blocks have 3/8 in. hose barb on the inlet and outlet. Mr. Gasket fuel pressure gauge/inline adapter kits include gauge, adapter, and clamps for a quick, simple installation.
( 40 )
$77.75
$69.98
—
$77.55
Mr. Gasket Engine Rebuilder Overhaul Gasket Sets
The name pretty much explains it all. Mr. Gasket engine rebuilder overhaul gasket sets are designed specifically to rebuild stock engines. These overhaul sets contain all the gaskets and seals required to rebuild today's engines. That means gaskets and seals for the cylinder heads, intake and exhaust manifolds, timing cover, fuel pump, crankshaft, oil pump, valve covers, and any other essential components. They're available in Ultra-Seal and Solicor styles.
( 8 )
$94.59
—
$104.95
On Sale
Mr. Gasket Flexplate Bolt Kits
Forged from high-quality steel, and then heat-treated for maximum strength, these Mr. Gasket flexplate bolt kits are a must for all high-performance applications. They include lockwashers where required, and are black plated to resist rust and corrosion.
( 5 )
$23.51
$21.16
—
$35.59
On Sale
Mr. Gasket Oil Filter Adapter Kits
These oil filter adapters from Mr. Gasket mount a spin-on oil filter. Some adapters contain a filter bypass valve.
( 28 )
$49.95
$29.84
—
$33.28
On Sale
Mr. Gasket Valve Cover Y-Wing Bolt Kits
Chrome plated for beauty and durability, these Y-wing bolts from Mr. Gasket make valve cover removal fast and easy. They are precision-engineered and feature extra-long threads.
( 24 )
$18.80
—
$47.40
$16.92
—
$26.72
On Sale
Mr. Gasket Cam Change Gasket Sets
When you change a cam, you don't need a complete engine gasket set, because you don't have to take everything apart. Mr. Gasket cam change gasket sets are tailored to deliver just the pieces that you need when you swap bump-sticks. They include gaskets for the valve covers, intake manifold, oil pan, water pump, timing-chain cover, and fuel pump.
( 13 )
$229.95
$74.35
—
$249.95
Mr. Gasket Tire Screw Kits
Keep your tires on the rim with Mr. Gasket tire screw kits. They are specifically designed to help prevent tires from spinning on the rim with low tire pressure. Each kit contains 35 screws and a drill bit to complete two wheels. They're cadmium plated to prevent rust, and are a must for serious competitors.
( 16 )
$33.67
