Availability
On Sale
Mr. Gasket CopperSeal exhaust gaskets are made from .043 in. thick solid copper, and are track-proven to eliminate exhaust leaks in Top Fuel Dragster, Funny Car, and Alcohol class race cars. These gaskets feature an embossed O-ring design to increase sealing pressure around the exhaust ports, creating a tight, leak-proof seal. They're also ideal for tow vehicles and motor homes. CopperSeal gaskets are available in a variety of port styles, as well as more than a dozen size configurations. Order the model designed for precise fitment with your exhaust header.
( 42 )
$68.95
—
$69.29
Mr. Gasket cast aluminum covers are constructed of high quality die-cast aluminum for an excellent fit. They are available in polished, finned, and ball-milled versions to fit a variety of engines. Features: * Top quality cast aluminum construction * Choice of smooth top polished, finned, or ball-milled designs * Some available in tall versions for additional rocker arm clearance * Thick gasket rail area for excellent sealing * Pre-punched breather openings with baffles * Includes mounting hardware
( 88 )
$99.95
On Sale
Mr. Gasket offers replacement water necks in a variety of styles, materials, finishes, sizes, and angles. Water necks help to hold the vehicle's thermostat in place as it opens and closes—to regulate the flow of coolant through your engine. The opening in the water neck created by the thermostat allows coolant to flow from the radiator back to the engine. Order the model recommended for your vehicle.
( 114 )
$55.29
—
$74.19
Mr. Gasket MLS (multi-layered steel) header gaskets are designed for extreme cylinder pressures produced by high horsepower, high compression, turbo-charged, supercharged and nitrous equipped engines. MLS header gaskets are manufactured from three stainless steel layers that resist corrosion, will not burn through or push out, and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal excessive exhaust pressure produced from cylinder heads.
( 15 )
$56.69
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$75.65
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 91 )
$72.55
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$56.69
—
$62.95
Mr. Gasket screw-in rocker arm studs are ideal for high performance cams in cars used primarily on the street. They are constructed from alloy steel, have no oil holes, and are concentric to keep the rockers, pushrod, and valve stems in alignment.
( 20 )
$75.65
—
$99.95
On Sale
Mr. Gasket has two different oil pan gasket sets for your needs: Standard and Ultra-Seal. For stock rebuilds, the standard gaskets are just fine, but for high performance applications, the Ultra-Seals are where it's at. The Ultra-Seal oil pan gaskets are designed for today's performance engines that create excessive amounts of vacuum and pressure in the oil pan. They're constructed from a fiber material that features excellent tensile strength and superior blowout resistance.
( 26 )
$68.05
Mr. Gasket's Ultra-Seal gaskets are designed for today's performance engines, which can create excessive amounts of vacuum and pressure in the oil pan. They're constructed from a cellulose/nitrile material that features excellent tensile strength and superior blowout resistance, and their black latex coating conforms to minor sealing-surface irregularities for a better seal.
( 7 )
$69.29
Don't forget to change your gasket when you change your timing chain or cam. These gaskets are designed to provide a reliable seal for your timing chain cover. Made from high grade cork granules and a neoprene binder, these gaskets will not shrink or stick and provide excellent sealing and durability.
( 7 )
$72.55
Do you have a leaky transmission pan gasket? You need to replace it with one of these premium transmission pan gaskets from Mr. Gasket. They're precision-made from materials that feature excellent compressibility and greater thickness recovery for a positive seal. Your garage floor will thank you!
( 31 )
$56.89
These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
( 1 )
$55.65
Mr. Gasket oil pan stud kits are made from Grade 5 steel for strength and durability. They feature special underhead serrations to prevent loosening, and their wide flange head distributes clamp-load uniformly. The studs are black oxide and the hex nuts are cadmium plated to resist corrosion and provide a clean, professional appearance.
( 5 )
$52.75
On Sale
These chrome valve covers from Mr. Gasket are the perfect addition to your engine. They have Mr. Gasket quality and a great price. The covers have a thick-gauge steel with a durable chrome finish, and most are available in short or tall versions.
( 22 )
$83.19
On Sale
Mr. Gasket Ultra-Seal exhaust gaskets are designed and constructed to improve the sealing of exhaust header flanges. Unlike standard exhaust gasket material, Ultra-Seal gaskets incorporate a graphite-impregnated facing and a steel-expanded metal core that reinforces and increases their tensile strength. This allows the gaskets to conform to warped flanges, giving them better sealing capabilities without deteriorating or cracking under the excessive heat and pressure that's common in exhaust systems. Ultra-Seal gaskets are available for a wide range of port styles and sizes. Additional features and benefits: * Expanded steel core provides stability and maximum torque retention to eliminate gasket failure * Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head * High-recovery material allows header or manifold flange to stay sealed if flange loses clamp-load * Can be trimmed for modified port applications * Designed for OE replacement, high performance street, drag race, road racing, and oval track use
( 174 )
$52.75
Because of the technology available in today's high-performance engines, there came a demand for more durable head gaskets. Mr. Gasket responded to this challenge by creating the Ultra-Seal lineup. They feature excellent compressibility and high-temperature endurance, while not becoming brittle or brinelling aluminum cylinder heads. Their 5-layer composite construction sandwiches their patented Grafoil core material between two steel plates for strength, and a special elastomer coating is applied to both sides for leak-proof sealing protection. In addition, they're corrosion-resistant for compatibility with all types of fuel, and they won't require retorquing.
( 8 )
$87.15
Do you want the chrome valve cover look without the hassle, or the high price tag? If so, then these chrome valve cover caps from Mr. Gasket are just what you need. They're designed to fit right over top of your old covers, so you don't have to change gaskets. The caps have the same durable chrome finish as their covers for a long lasting shine.
( 1 )
$105.95
These Mr. Gasket oil pan bolt kits have a special smaller-than-standard hex head that is ideal for tight spaces. Because of the hex flange head design, it will not back into the socket wrench, allowing for easier installation. Special underhead serrations prevent loosening, and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. The Grade 5 bolts are zinc plated.
Not Yet Reviewed
$74.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
