Availability
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 337 )
$93.99
—
$109.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$55.99
—
$112.99
Spools are an alternative to a locker for traction and performance enhancement. Motive Gear mini spools are a favorite of off-road competitors. A differential with a spool setup delivers equal power and traction to both left and right-side rear wheels. Spool solutions are less expensive than lockers and weigh less. Motive Gear offers a full line of mini spools in the most popular applications for differential modification.
( 98 )
$63.99
—
$143.99
Motive Gear offers manual transmission input shafts for a wide range of vehicles from the 1980s and up. These replacements are precision-machined from hardened steel to provide the utmost in strength and performance. Connect with the power of Motive Gear—order the input shaft designed to work with your transmission application.
( 13 )
$61.99
—
$103.99
When your vehicle's limited-slip starts acting more like an open differential, you'll need Motive Gear differential clutch packs. These composite clutches restore preload and provide minimal slip before engagement. Most packs provide factory-new hookup, but some available kits make for tight limited-slips. Whether racing, 4-wheeling, or running the streets, limited-slips provide the extra traction to get you where you want to go. Keep these units tight with Motive Gear differential clutch packs.
( 1 )
$106.99
Motive Gear ring and pinion gear installation kits include high-quality components to complete your project. Depending on the axle application, the kits can include: a cover gasket, pinion shims, carrier shims, crush sleeve, pinion seal and nut, and ring gear bolts. Some kits also come with marking compound and a brush. To ensure proper fitment, order the installation kit designed for your specific axle model.
( 48 )
$50.99
—
$140.99
Motive Gear manual transmission replacement gears help make your shifts smooth. Worn gears can cause problems, so when you need replacements Motive Gear offers the gears to fix the grind and whine of your manual transmission.
( 14 )
$55.99
—
$104.99
Motive Gear differential pinion bearing kits are designed and assembled to make your repair, installation or complete differential overhaul as smooth and trouble-free as possible. These kits include high-quality pinion bearings, crush sleeve, marking compound, a brush, pinion nut, pinion seal, pinion shims and thread locking compound. Order the kit that is best suited to fit your application.
( 2 )
$52.99
—
$80.99
Motive Gear light-duty axle shafts are designed as direct replacements for OE axle shafts without modifications. They're made from quality materials and heat treated for strength and durability. The axle shafts are available for thousands of vehicles from 1965 and up. They are offered in various lengths, wheel stud patterns, and splines—for different positions and differential case design applications. Experienced installers know Motive Gear and trust them for the best quality and value in drivetrain components. Order the light-duty axle shaft model recommended for your ride.
( 38 )
$66.99
—
$176.99
If you're looking for transfer case components like range forks, Motive Gear has what you need. They use only the highest quality materials to manufacture their equipment and have been providing aftermarket parts for over 65 years. When it comes to using transfer case components you can depend on time and time again, Motive gear has you covered.
( 16 )
$54.99
—
$115.99
Are you setting up a rear-end? These Motive Gear differential carrier shim kits will make the job easier. They come with a variety of shims, so you're sure to find the best fit for your vehicle; plus, they're made of steel for durability. Whether you're installing a new setup or refreshing an old one, you can trust the Motive Gear differential carrier shims designed for your application to make the job a snap.
( 36 )
$59.99
Motive Gear offers a full line of manual transmission replacement components. From hubs to shafts, and gaskets to bearings, Motive Gear has what you need for your manual transmission repair or rebuild!
( 25 )
$82.99
Motive Gear bearings help to keep your manual transmission in check and running smoothly. Transmissions have many different bearings, and each serves a unique purpose while reducing friction and handling stress. And over time, they do wear out. So, if you suspect a problem, check it out. Then, if you need new transmission bearings, shift back into efficient operation with the Motive Gear replacements recommended for your application.
( 3 )
$52.99
—
$65.99
Replace your damaged, worn, or missing shift forks with Motive Gear manual transmission replacement shift forks. They're manufactured from high-quality materials and are precision-machined to fit inside of your transmission with no modifications. The forks are available for different positions and transmission models, so order the model designed for your application.
( 41 )
$61.99
If you're installing a bigger series gear set onto a smaller series carrier, then you'll need ring gear spacers from Motive Gear. Stamped and precision Blanchard-ground to ensure trueness, the spacers provide proper backlash and a secure mount for your ring gear. Sizes are available to fit a variety of axle models. Motive Gear spacers include the longer ring gear bolts required, so no modifications are necessary for installation.
( 23 )
$71.99
—
$84.99
Motive Gear manual transmission small parts kits feature all of the necessary parts to get you started on your transmission rebuild. They're available for 3-, 4-, and 5-speed manual transmissions, so they'll be sure to have your classic vehicle covered. Order the Motive Gear small parts kit designed to fit your application.
Not Yet Reviewed
$54.99
Motive Gear offers differential carrier cases for thousands of applications from 1955 and up. These replacements feature rugged steel construction and will accept all of your factory internal parts without any modifications. Models are available for countless differential case design types, including Chrysler, Dana, Ford, GM, and Toyota. Keep your wheels turning effectively; order the case and options recommended for your vehicle.
( 24 )
$95.99
—
$134.99
Motive Gear Ten Factory replacement axle shafts are available for direct fitment on nearly two dozen axle models and hundreds of vehicle applications. Built from quality materials and heat-treated for strength and durability, Ten Factory axle shafts are offered individually to swap out a broken or worn original—as well as in more complete kits, with multiple shafts, wheel studs, bearings, and seals (depending on your selection). The components feature strong forgings and alloys for quality axle shafts you can rely on. Choose the parts needed for your specific make and model.
( 138 )
$176.99
Motive Gear Daytona style pinion supports use larger pinion bearings to provide an increase in strength over stock pinion supports. They're required for use with Motive Gear's AX series ring and pinions.
Not Yet Reviewed
$111.99
Motive Gear offers a replacement driveshaft yokes for thousands of applications. As an integral part of the differential transmission system, they help transfer power from the driveshaft to the pinion. The yokes are available in different materials and for a variety of positions and case designs. All Motive Gear products undergo rigid quality control processes to ensure proper fit, performance, and longevity.
( 22 )
$64.99
—
$71.99
Motive Gear offers tapered coned bearings for a variety of applications. The most basic and most widely used type of tapered roller bearing, these replacements consist of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on a shaft. Timken machines these bearings from stamped steel, with precision CAD specs ensuring the proper size for optimum performance.
Not Yet Reviewed
$52.99
These Motive Gear differential carrier bearings are press fit bearings made of hardened steel and are used in multiple Motive Gear bearing kits. They are the same bearings that are used as Dana inner wheel bearings. If you're looking for new differential carrier bearings, Motive Gear has what you need.
( 3 )
$78.99
Get a perfect fit and dependable performance with Motive Gear OEM replacement axle shafts! They are made from top-quality steel and available for a wide range of applications.
( 7 )
$118.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
