Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Motion Pro Standard Black Vinyl Throttle Cables
Motion Pro standard black vinyl throttle cables are designed to meet or exceed OE quality. These black vinyl cables feature a coil wound housing and an inner nylon sleeve for longer life and smooth operation. They are available in a wide variety of applications.
( 3 )
$9.59
—
$58.29
Motion Pro Terminator LW Clutch Cables
Motion Pro Terminator LW clutch cables deliver a precise, positive, non-mushy feel for enhanced performance. Their longitudinally wound (LW) housings resist compression under heavy loads, offering smooth and precise clutch operation. Outfit your motorcycle with Motion Pro Terminator LW clutch cables.
Not Yet Reviewed
$25.29
—
$46.19
Motion Pro Carburetor Idle Mixture Screw Kits
Motion Pro carburetor idle mixture screw kits install a standard Mikuni idle adjuster into the carburetor body. These Motion Pro carburetor idle mixture screw kits are necessary if the carburetor top has been replaced with a standard Mikuni cap. These kits include a drill bit, thread tap, two idle screws with locknuts, and instructions for an easy installation.
( 1 )
$6.59
—
$24.99
Motion Pro Rev3 Sportbike Throttle Kits with RoadControl Grips
Motion Pro's Rev3 Sportbike throttle kits innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions. The Rev3 throttle has several different size reels that will change how much twist is necessary for the throttle to completely open the carbs or throttle bodies on a motorcycle. The larger the reel is, the shorter the twist. Each reel size will shorten the twist by about 10 degrees. If your stock throttle has a 40mm reel and stock twist is 90 degrees (1/4 turn), the 45mm reel will reduce the twist to 80 degrees and the 50mm reel will reduce it to 70 degrees. The 35mm reel will increase the throttle twist to approximately 100 degrees. This is just an example; every model of motorcycle is different. The included cam reel has a progressive profile, allowing the throttle to act like a sensitive, long twist throttle during the initial small throttle openings for precise control, and then acts like a more aggressive short twist throttle at large throttle openings, progressively shortening the amount of twist needed to reach full throttle. Product details: * Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions * Five different reels provide perfect throttle response for any condition—use smaller reels for a slower throttle rate and larger reels for a faster throttle rate (included cam reel provides progressive throttle response preferred by some riders) * Slim Rev3 throttle housing allows more room for lever clearance and adjustment to the throttle housing position * Improved throttle stop provides greater strength and durability—snap-together elbows make it even easier to install and change reels * Cable boot keeps dirt and dust out for reliable and smooth operation * Rev3 Off-Road kits are compatible with the new Motion Pro DirtControl V2 Lock-On grips and ODI Lock-On grips * Billet aluminum inline cable adjusters ease installation and adjustment * Lower section of cables use 5mm housing with PTFE liner for reduced friction, increased routing flexibility, and lighter weight * Upper section of cables uses 6mm housing to provide solid support for adjusters * Simple to install and maintain * Innovative patented design Kit includes: * Rev3 throttle assembly with throttle tube (Rev3 Off-Road kits include the unbreakable Titan throttle tube) * Motion Pro Rev3 black vinyl cables specifically designed for your bike * Rev3 Sportbike kits include Motion Pro Road Control grips and Rev3 Off-Road kits include Motion Pro DirtControl II grips * Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm * Progressive cam reel—Sportbike kits include road race profile cam reel (orange) and Off-Road kits include off-road profile cam reel (gray)
Not Yet Reviewed
$192.99
Motion Pro Standard Black Vinyl Clutch Cables
Motion Pro standard black vinyl clutch cables provide smooth and precise control of your clutch. Affordable alternatives to OEM cables, these replacements are designed to meet or exceed OE quality. They feature a coil wound housing and an inner nylon sleeve for longer life and smooth operation. Motion Pro standard black vinyl clutch cables are available in a wide variety of applications.
( 7 )
$6.99
—
$67.75
Motion Pro Armor Coat Braided Stainless Steel Clutch Cables
Dress your bike up with Motion Pro Armor Coat braided stainless steel clutch cables. They feature a crystal-clear sheathing to protect the finish on your motorcycle and preserve the radiance of the braided stainless steel cables. Extensively tested to resist the effects of the sun's UV rays, these Motion Pro Armor Coat braided stainless steel clutch cables will not dull or discolor and will set your ride apart from everyone else's.
Not Yet Reviewed
$50.59
—
$73.69
Motion Pro Carburetor Caps
Motion Pro offers carburetor caps for both aftermarket and OEM spec applications, including standard type caps designed for most Mikuni VM 26 to 34mm carburetors generally used in some Motion Pro Yamaha throttle kits. Carb caps are also available in applications to work with select Keihin and Yamaha Banshee models. With these Motion Pro carb caps, the carburetor is much easier to work on. When you are ready for a rebuild, use one of these Motion Pro carb cap replacement parts as your foundation to keep your carburetor running like new. Select the cap for your application.
Not Yet Reviewed
$8.99
Motion Pro Vortex SE Throttle Assemblies
Motion Pro's Vortex SE throttle assemblies are redesigned and improved editions of their popular Vortex throttle in a lighter, ultra-compact design that maximizes handlebar space. Built with diecast aluminum construction, a billet aluminum cover, and a smooth painted black finish, these assemblies feature POM pulleys with a brass bearing for a smooth feel and extended wear resistance. Each one also includes a premium Titan throttle tube with Lifetime Limited Warranty. Additional features: * Compatible with Motion Pro DirtControl V2 and ODI V2 lock-on grips using cam "C" * Fits 7/8 in. (22mm) bars * Replaces OEM throttle on many Japanese 2-stroke MX bikes * Fast twist rate opens throttle at 0.526 mm of cable pull per degree of rotation * Will open carb to full throttle on most 2-stroke bikes in just 70 degrees of rotation * Will pull 50mm at maximum twist of 95 degrees
Not Yet Reviewed
$57.99
Motion Pro Armor Coat Throttle and Idle Cables
Motion Pro Armor Coat throttle and idle cables feature attractive stainless steel weave casings and protective clear Armor Coat that guards chrome and painted surfaces against damage. These Motion Pro cables also feature premium chrome fittings and PE liners for durability and smoothness. Select the cables designed for your motorcycle.
Not Yet Reviewed
$36.29
—
$106.99
Motion Pro Standard Black Vinyl Brake Cables
Motion Pro standard black vinyl brake cables are designed to meet or exceed OE quality. These black vinyl cables feature a rolled tempered-steel wire housing made to exact inner and outer specifications to ensure correct clearances for the inner wire. All cables have an inner nylon sleeve for longer life and smooth operation and are available in a wide variety of applications.
Not Yet Reviewed
$17.99
—
$49.49
Motion Pro Standard Black Vinyl Choke Cables
Motion Pro standard black vinyl choke cables are designed to meet or exceed OE quality. These black vinyl choke cables feature a rolled tempered-steel wire housing made to exact inner and outer specifications to ensure correct clearances for the inner wire. All Motion Pro standard black vinyl choke cables have an inner nylon sleeve for longer life and smooth operation.
( 1 )
$12.99
—
$20.49
Motion Pro Rev2 Handlebar Stop/Start Switches
Motion Pro Rev2 handlebar stop/start switches are required for installation of Motion Pro Rev2 or Revolver throttle kits on bikes that come with ignition and starter switches in the stock throttle assembly. Features include: * Fit 7/8 in. bars (22.2mm) * Extra narrow design is only 26mm wide * Push in/out engine switch * Momentary 2-pole starter switch * Starter switch has two separate circuits, one normally open, one normally closed for street bikes that use a headlight/starter cutoff * 550mm long wiring harness with brake light switch circuit wiring * Brake light circuit wiring pigtail 120mm long with female spade connectors * Stainless steel screws and internal rubber pad positions switch on handlebar securely without drilling holes * Wiring harness has bare, tinned wires without connector for easy installation of OE connector body * Made in Italy by Domino
Not Yet Reviewed
$115.49
Motion Pro Standard Black Vinyl Tachometer Cables
Motion Pro standard black vinyl tachometer cables are designed to meet or exceed OE quality. These black vinyl tachometer cables feature a rolled tempered-steel wire housing made to exact inner and outer specifications to ensure correct clearances for the inner wire. All Motion Pro standard black vinyl tachometer cables have an inner nylon sleeve for longer life and smooth operation. Motion Pro uses the terminology "coil wound" to describe this standard type of cable housing.
Not Yet Reviewed
$10.99
—
$31.89
Motion Pro Standard Black Vinyl Hot Start Cables
Motion Pro standard hot start cables are affordable alternatives to OEM. Each cable features black vinyl coil-wound housings with an inner nylon sleeve for longer life and smooth operation. They meet or exceed OE quality to function as expected to get your hot engine started. Select the Motion Pro cables designed for your motorcycle, ATV, or UTV.
Not Yet Reviewed
$11.99
—
$22.99
Motion Pro T3 Slidelight Clutch Cables
These Motion Pro T3 Slidelight clutch cables are designed for increased efficiency to provide you with lighter, smoother pull and significantly increased durability over conventional OE cables. Motion Pro T3 Slidelight clutch cables will spare your fingers, helping to reduce hand stress, fatigue, and arm pump and giving you increased control at the end of the race when everyone else is fading. The T3 clutch cables also provide dramatically increased durability. Motion Pro's test results show that the liner of normal cables can wear out in less than 1,200 cycles, resulting in grinding, friction-generating, metal-to-metal contact. Test results prove that the proprietary liner material used in the Motion Pro T3 Slidelight clutch cables can last for 30,000 cycles with only minimal wear. This gives you a longer-lasting cable that provides consistent, smooth performance long after conventional cables have worn out.
Not Yet Reviewed
$43.99
Motion Pro Armor Coated Speedometer Cables
Motion Pro offers Armor Coated speedometer cables that will give your bike an attractive look without compromising quality, giving you the same dependable Motion Pro performance and durability while also being very affordable. These speedometer cables have attractive stainless steel weave casings and protective clear Armor Coat that protects chrome and painted surfaces and feature premium chrome fittings and PE liners for durability and smoothness. Select the cables designed for your application needs.
Not Yet Reviewed
$43.99
Motion Pro Rev3 Off-Road Throttle Kits with DirtControl II Grips
Motion Pro Rev3 off-road throttle kits include DirtControl II grips and feature innovative reel changing systems that let you tailor the throttle rate to your preference and riding conditions. These 3rd generation Revolver variable rate throttle systems include four interchangeable round reel and a progressive cam reel to provide perfect throttle response for any condition--smaller reels for slower throttle rate and larger reels for faster throttle rate. The cam reel provides the progressive throttle response preferred by some riders. Motion Pro Rev3 off-road throttle assemblies include the unbreakable Titan Throttle Tube, a black vinyl cable specifically designed for your bike, and reels. Select the kit made for your motorcycle. Additional features and benefits: * Slimmer throttle housing allows more room for lever clearance and adjustment to throttle housing position * Improved throttle stop provides greater strength and durability * Snap together elbows make it even easier to install and change reels * Cable boot keeps dirt and dust out for reliable and smooth operation * Billet aluminum inline cable adjusters ease installation and adjustment * Lower section of cables uses 5mm housing with PTFE liner for reduced friction, increased routing flexibility, and lighter weight * Upper section of cables uses 6mm housing to provide solid support of adjusters * Rev3 off-road kits are compatible with Motion Pro DirtControl V2 and ODI lock-on grips
Not Yet Reviewed
$192.99
Motion Pro Turbo SE Throttle Kits with DirtControl II Grips
Motion Pro offers "innovative tools and products that help you maintain and repair motorcycles, ATVs, and UTVs". Motion Pro Turbo SE throttle kits with DirtControl II grips provide the ultimate throttle performance. Each assembly features a diecast aluminum construction, billet aluminum cover, a smooth painted black finish, and POM pulley with brass bearing for a smooth feel and extended wear resistance. Packaged along with the throttle assembly is a throttle cable and Motion Pro DirtControl II grips with an ergonomic design, web pattern, and fingertip traction with light knurling to provide comfort, control, and a secure feeling in wet and dry conditions. Select the kit designed for your off-road machine.
Not Yet Reviewed
$121.99
Motion Pro Fork Compression Valve Removal Tools
Motion Pro fork compression valve removal tools are used for removing the compression valve from the cartridge. They are 19mm hex drive/36mm octagon and are manufactured out of billet 6061 T-6 aluminum. You can rely on Motion Pro for quality motorcycle tools, cables, and controls.
Not Yet Reviewed
$18.99
Motion Pro Lever Assemblies
Motion Pro lever assemblies are designed as an OEM replacement. These levers are built to exceed OEM specifications and resist breaking. Each lever is designed to fit different stock applications. Motion Pro lever assemblies will get you back on the road, trail, or track when you experience a broken lever.
Not Yet Reviewed
$36.99
Motion Pro MX Forged Levers
Motion Pro MX forged levers are made from 6061-T6 polished forged aluminum for increased strength, and a roller bearing in the clutch pivot for effortless operation. These Motion Pro MX forged levers are designed to fit OE perches for a quick and easy installation and are available for replacement clutch or brake levers.
Not Yet Reviewed
$36.99
—
$41.99
Motion Pro Brake and Clutch Levers
Motion Pro brake and clutch levers offer OE-style replacements at an economical price, and are available in two styles--polished aluminum or black finish depending on your application. These standard levers are made from quality aircraft-grade A-360 aluminum for strength and durability. They are designed to meet or exceed OEM specifications. Motion Pro brake and clutch levers are available for a wide range of street, off-road, and ATV applications.
Not Yet Reviewed
$44.99
