Availability
Moroso Perm-Align valve cover gaskets are manufactured from 30-durometer rubber, which is molded over and vulcanized to a rigid steel frame. They won't leak, blow out, or get sucked in, the way stock or inferior-quality aftermarket gaskets can. These gaskets feature superior-quality rubber and steel, which outlast cork-and-rubber composite designs to provide years of dependable service, especially if you frequently have to remove and reinstall the valve covers.
( 201 )
$56.99
—
$92.99
Moroso oil pan gaskets offers race-quality, reinforced, and available for many popular engine applications. So, if you're tired of your car marking its territory in your garage or driveway, give one of these Moroso oil pan gaskets a try!
( 141 )
$57.99
—
$92.99
Moroso extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans and constructed of steel, they are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.
( 127 )
$51.99
—
$98.99
These mounts are made for racing. Moroso solid steel motor mounts replace stock, OEM-style rubber mounts to prevent torque loss and binding linkages, a common result of excessive engine movement. These solid steel mounts eliminate the need for bulky torque straps and chains and are covered with a protective zinc coating.
( 135 )
$54.99
—
$83.99
Moroso offers manifold filler necks in a variety of styles, materials, and finishes—for applications from 1955 and up. These replacements locate the filler at the highest point to bleed off air on cars with low-mount radiators. The filler necks can be located on either the left or right side of the vehicle. They include 1/2 in. NPT fittings for the installation of a water temperature sending unit, and two 1/4 in. NPT fittings for return lines on popular aftermarket cylinder heads.
( 20 )
$62.99
—
$97.99
Moroso harmonic balancer tools use a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline, for a bind-free installation. Using a thrust bearing and protective washer, the drive nut can rotate freely, allowing the balancer to be pressed on easily.
( 95 )
$71.99
Who said high quality and high performance can't be cost effective? Moroso Ultra ignition wire sets are equal to or exceed OEM specifications, depending on the application, without the dealer prices. Moroso has more than 50 years of experience in supplying spark plug wires to the top teams of NASCAR and NHRA, as well as auto manufacturers. These sets are available in different thicknesses and colors, assembled or not, with multiple boot end angles. Some models include high temperature sleeves. Order the ignition wires recommended for your application.
( 65 )
$50.99
—
$52.99
These oil pan bolts are made from Grade 8 steel. They have an integral serrated washer face, which gives them a self-locking effect.
( 35 )
$56.99
Moroso vacuum pump mounting brackets are a great way to eliminate the difficulties of vacuum pump installation. Designed to fit Moroso original or enhanced design vacuum pumps, they come available for a variety of engines and mounting locations.
( 3 )
$93.99
These Moroso water neck bleeder kits allow you to remove air pockets from your cooling system. They include a filler neck housing with a 90 degree outlet for the upper radiator hose, an aluminum bleeder plate with a petcock valve, two mounting gaskets, and mounting hardware. The Moroso water neck bleeder kits can also be used with Moroso's expansion tanks for maximum cooling performance.
( 4 )
$85.99
Moroso billet aluminum filler necks allow you to install a variety of bolt-on style filler necks or block-off plates, offering cooling system flexibility for both race and street applications. The base locates the filler neck at the highest point, to bleed off air on cars with low-mount radiators. They include a machined port for installing a water temperature sending unit, and two ports to plumb return lines on popular aftermarket heads. And, to give you versatile mounting options--these filler necks can be flipped 180 degrees for either a left or right water hose outlet location.
( 9 )
$54.99
—
$96.99
Moroso oil bypass eliminators are designed to eliminate the OEM oil bypass on small block Chevrolet engines. They are manufactured from billet aluminum and are black anodized for protection against corrosion. They will not allow unfiltered oil back into the engine. Whether you are using a stock spin-on type oil filter or running a remote mount oil system, these Moroso oil bypass eliminators will get the job done.
Not Yet Reviewed
$54.99
Moroso Brodix SR20/Dart Pro-1 valve covers gaskets will help to protect cylinder head hardware from the elements and prevent oil from escaping the engine. These engine components are sold in pairs and are made of thick silicone-coated paper with a steel core. They are specifically designed to fit Big Block Chevy engines with Brodix SR20 or Dart Pro 1 20-degree heads.
Not Yet Reviewed
$77.99
These Moroso Mag-Tune spark plug wires are fully tested to ensure secure termination, electrical conductivity, and dielectric strength. They feature moisture-resistant 100 percent silicone boots and snap-lock spark plug terminals. The Moroso Mag-Tune spark plug wires start with a conductive latex-coated, heavy-duty fiberglass core and then add a spiral-wound stainless nickel alloy conductor over the top. Added to that is a fiberglass reinforcing braid, and they finish the construction with a high-temperature EPDM jacketing.
( 125 )
$59.99
—
$63.99
Moroso cast aluminum crankshaft pulleys have a small diameter that slows fan, water pump, and alternator speeds to reduce horsepower-robbing drag. They also have extra-deep grooves to provide added belt retention during rapid changes in engine rpm. They are precision-machined from high-grade, lightweight, aluminum castings.
( 17 )
$92.99
—
$96.99
These stamped steel valve covers from Moroso are available in your choice of short or tall designs with a variety of breather locations. They are designed to fit everything from stock to Circle Track-oriented configurations. They're manufactured from high-quality steel with either a durable zinc plated finish or a 3-step chroming process, which guarantees the highest and longest-lasting shine possible. Most applications include two breather/filler cap grommets and one PCV grommet. Circle Track and other racing versions feature welded-on breather tubes in a variety of locations, with most including breathers.
( 40 )
$87.99
—
$96.99
Moroso fuel pump block-off plates are designed to block-off the fuel pump mounting boss when a mechanical fuel pump is not being used. These plates are made of anodized blue aluminum or high-luster triple chrome plated steel.
( 60 )
$60.99
Moroso coil shield covers improve the look under your hood. Fabricated from thick aluminum with TIG-welded corners, they include a rubber grommet for wire protection. The covers can be polished, chromed, powdercoated, or painted for a custom appearance. Dress up your engine bay with Moroso coil shield covers.
( 8 )
$65.99
Moroso water pump spacer kits convert Chevrolet short water pumps to the later long-style pump design. They include gaskets, special heat-treated bolts, and spacers.
( 3 )
$66.99
—
$67.99
Moroso starter heat shields are engineered to protect starters against damaging heat from exhaust manifolds or headers. They are manufactured from a high-temperature insulating material sandwiched between two sheets of aluminum.
( 23 )
$50.99
—
$55.99
Designed to shield your intake manifold from hot oil splash to maintain a cooler intake charge for more power, Moroso Lifter Valley oil baffles also help keep excess oil out of your valve covers and maintain oil pressure in the event of pushrod or rocker arm failure by keeping the lifters in their bores. Due to slight variations in blocks, the baffle may need slight trimming before they will "snap" into place.
( 4 )
$58.99
—
$62.99
Moroso louvered windage trays are designed to allow oil thrown from the rotating assembly to drain into the sump, without splashing back and creating power-robbing drag. Made from heavy-gauge steel, they are PTFE coated for quick drainage.
( 26 )
$57.99
—
$93.99
Moroso oil filter block-off plates are designed for use with the Moroso dry sump oiling system or external oil pump. They are drilled and tapped to accept a 1/2 in. NPT fitting to provide increased clearance for installing an input pressure line. Mounting hardware and O-rings are included.
Not Yet Reviewed
$54.99
Don't settle for flimsy alternator brackets when you can put on a heavy-duty alternator bracket from Moroso. Their stout construction keeps your belts in line under extreme loads and rpms. They're available for a variety of engines and alternator locations. Mounting hardware is included, unless otherwise noted.
( 48 )
$87.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
