Availability
Moroso push/pull battery disconnect mounting kits allow you to mount a battery disconnect switch to a roll cage tube with a weld-on bracket, then actuate it with the provided T-handle protruding through the rear panel of the vehicle. They include the correct brackets, swing arm linkage, an 18 in. long black anodized aluminum actuator tube link, and the necessary bushings and mounting hardware for installation.
( 8 )
$93.99
Moroso quick-disconnect flush-mount battery cable connectors are designed for charging the battery without removing any body panels. The kits include quick-release, half-turn locks for easy, fast access. They also feature color-coded terminals and necessary mounting hardware for installation.
( 3 )
$27.99
—
$212.99
Moroso front housing mount adapters are designed for use on Jesel front drive distributors. These high temperature and performance caps are vented to prevent ozone buildup. Moroso has all of the components and replacement parts that you need to keep your Circle Track car's ignition system performing at its best.
Not Yet Reviewed
$62.99
Moroso ignition coil mount brackets are designed for use with Moroso valve covers, but can be drilled to be used with other valve covers, or to remote-mount coils in a different location. These coil bracket kits may be used to relocate the LS coil between the top of the valve cover and the intake, and when used with Moroso valve covers, the valve cover can be removed and installed without disturbing the coils or brackets. Two versions are available: one for LS1/LS6 coils and the second for LS2, LS3, LS7, L92, L98, and L99 coils. The kits include black anodized aluminum brackets and hardware (one kit does one LS engine).
( 1 )
$163.99
—
$346.99
Put control at your fingertips with Moroso rocker switch panels. They're available in a variety of styles and switch counts. Other options include fused circuits, circuit breakers, lighted and momentary rockers, and mounting locations. Choose the panel that's best suited for your vehicle application.
( 23 )
$162.99
—
$285.99
Custom-wiring your vehicle just became so much easier with Moroso toggle switch panels. Every switch panel has indicator lights and front mounted, E-Z access fuse holders with pigtails attached. They come with custom labels, so you can customize each panel to your individual needs.
( 63 )
$92.99
—
$211.99
Moroso adjustable distributor slip collars can be positioned on a distributor to adjust installed height for dead center gear alignment. They are made of machined steel and bolt together using flush mount allen head bolts. They also align the distributor's lubrication grooves to line up correctly with the existing oil passages in the engine block.
( 2 )
$47.99
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 139 )
$108.99
Moroso distributor hold-down clamps are extra-thick and heavy duty to ensure adequate retention of distributor housing, and are stud-mounted to eliminate thread wear in the intake manifold. They are slotted for quick distributor removal and include a stud, washer, and nut.
( 25 )
$20.99
—
$106.99
Moroso's Super Looms wire looms can help keep your engine bay looking neat and orderly—as well as prevent ignition crossfire by keeping the plug wires spaced apart. These looms place your spark plug wires safely out of the way of hot headers or exhaust manifolds. They feature chrome plated brackets for stout valve cover mounting, and high temperature plastic separator looms to securely grip the spark plug wires. Moroso Super Looms are available in a variety of colors and styles for fitment with most engines.
( 123 )
$28.99
—
$50.99
Moroso super duty battery disconnect switches, with a rating of 2,000 amps intermittent and 300 amps continuous, are perfect for engines with a large starter draw, RVs, drag cars with alternators, and other applications. Two pairs of copper studs make these switches ideal for disconnecting alternators or other electrical devices in addition to the battery. They feature sealed shafts, which keep out moisture and debris, and the indexing pins align the switches with the mounting panels to prevent rotation. These super duty battery disconnecting switches include switch position face plates and decals to indicate switch location during emergencies. They are for use with Moroso push/pull switches for remote installations.
( 30 )
$106.99
Stuff your battery in Moroso sealed battery boxes and you can locate it just about anywhere you want on your vehicle and not worry about water, dirt, dust, etc. ruining it. Accepted by the NHRA and IHRA, these tough polyethylene boxes have an airtight lid with a foam gasket to keep battery gasses from entering your car's interior (six quick-release fasteners keep the lid on tight). These boxes come with a vent tube, a battery hold-down with 3/8 in. steel rods, rubber cable clamps and grommets, and mounting hardware.
( 45 )
$97.99
Moroso Universal Ultra LS/LT spark plug wire sets are perfect for installing remote-mounted coil packs. They're available in black in Ultra (350 ohm/ft.) and Ultra 40 (40 ohm/ft.) styles. Sets include eight 60 in. wires with coil ends pre-terminated, eight straight boots and terminals, eight 135-degree boots and terminals, and eight 90 degree boots and terminals.
( 3 )
$135.99
—
$166.99
Moroso battery disconnect switches are designed to be the best quality switches available. They are perfect for engines with large starter draws, RVs, race cars with alternators, and more. They feature copper mounting studs, sealed shafts to keep out moisture and debris, an indexing pin alignment to prevent switch rotation, and a face plate. They fit panels up to 1/4 in. thick.
( 54 )
$57.99
—
$112.99
You can benefit from a stronger and more consistent trigger signal with Moroso crank trigger Ultra Series kits. These kits use a transducer mounting bracket, which allows for a better timing adjustment range over the others. Their damper register locates the crank trigger wheel to help keep it perfectly aligned and concentric as it rotates. Other product features include built-in strain relief, a double-cavity nylon connector, and powerful rare earth cobalt magnets.
( 4 )
$403.99
These Moroso shrink sleeves will ensure a complete seal between spark plug boots, distributor boots, and any of the spark plug wire heat sheathes. They are sold in packages of 18, enough for a full set of spark plug wires, including an externally mounted coil.
( 6 )
$19.99
—
$33.99
Moroso high-temp under header wire looms are designed to withstand high temperatures associated with headers and route the wires below the heat. Since hot air rises, the wires stay cooler and give the engine a cleaner look. They include chrome plated brackets, high-temp wire separators, and mounting bolts.
( 23 )
$48.99
Moroso adjustable momentary switches have a 15 amp rating—ideal for operating trans-brakes or line locks on drag race cars. Their adjustable collar allows the plunger travel to be set from .020 in. to .219 in., making the switch "fast" or "slow" to suit individual reaction time requirements. These heavy-duty push-button switches can be through-panel mounted or affixed anywhere, using the two mounting holes provided.
( 10 )
$50.99
Moroso universal wire looms keep your spark plug wires where they belong. They'll prevent burning wires with headers or exhaust manifolds, keep your engine neat and orderly, and prevent crossfire by keeping the wires spaced apart. They feature chrome plated brackets for stout valve cover mounting and high temperature plastic looms. They're available in a variety of colors and styles.
( 14 )
$17.99
—
$24.99
Moroso push button starter switches are waterproof and dustproof. They also have a neoprene cap for in-car or underhood mounting.
( 8 )
$23.99
Moroso throttle stops for Holley 4150-style, 4-barrel racing carburetors provide a very strong and positive stop. They also prevent excessive side loading on the throttle shaft, which causes the throttle bores to wear out. These stops are adjustable and mount to the carburetor hold-down stud.
( 8 )
$49.99
Moroso replacement quick-disconnect female ends are replacements for your flush mount battery connectors. They're available in red or black for easier identification. Maintain the ease of cable connection and charger hookup with Moroso quick-disconnect replacement female ends.
Not Yet Reviewed
$56.99
Moroso remote battery jumper terminal brackets make mounting and aligning your Moroso battery jumper terminals or similar battery disconnect switches easier. These L-shaped brackets are made of durable 1/8 in. thick steel and can be bolted and/or welded into place. The finish of this steel bracket can be polished or painted if desired or left as is in its natural state.
Not Yet Reviewed
$32.99
Moroso replacement quick-disconnect male ends are replacements for your flush mount battery connectors. Maintain ease of cable connection and charger hookup with Moroso quick-disconnect replacement male ends.
Not Yet Reviewed
$62.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
