Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Moroso Crank Trigger Ultra Series Kits
You can benefit from a stronger and more consistent trigger signal with Moroso crank trigger Ultra Series kits. These kits use a transducer mounting bracket, which allows for a better timing adjustment range over the others. Their damper register locates the crank trigger wheel to help keep it perfectly aligned and concentric as it rotates. Other product features include built-in strain relief, a double-cavity nylon connector, and powerful rare earth cobalt magnets.
( 4 )
$384.99
—
$403.99
Moroso Advance Curve Kits
Moroso advance curve kits have three sets of advance springs, which allows you to adjust the rate of spark advance from quick, to super-quick, to ultra-quick. Each weight and centerplate is precision-stamped with smooth edges to eliminate erratic timing. Each kit comes complete with installation instructions.
( 44 )
$18.99
—
$19.99
Moroso Push/Pull Battery Disconnect Mounting Kits
Moroso push/pull battery disconnect mounting kits allow you to mount a battery disconnect switch to a roll cage tube with a weld-on bracket, then actuate it with the provided T-handle protruding through the rear panel of the vehicle. They include the correct brackets, swing arm linkage, an 18 in. long black anodized aluminum actuator tube link, and the necessary bushings and mounting hardware for installation.
( 8 )
$93.99
Moroso Adjustable Vacuum Advance Kits
Dial in spark advance with Moroso adjustable vacuum advance kits. They allow you to change the amount of ignition vacuum advance for maximum part-throttle performance while preventing harmful effects of detonation--spark knock. These kits can be adjusted as conditions permit; add more for improved throttle response and fuel economy under light loads or less for high loads and high compression engines to eliminate knock. Vacuum advance kits have a built-in stop to prevent the adjustment screw from "backing out" and include Allen wrench and easy-to-follow instructions for a no-hassle install. Get dialed-in for a better run with Moroso adjustable vacuum advance kits.
( 5 )
$38.99
Moroso Super HEI Ignition Kits
Upgrade your ignition system with Moroso Super HEI ignition kits! Developed for racing, all ignition components are engineered to improve ignition accuracy, fuel economy, starting and throttle response. The HEI distributor cap and rotor are precision molded from advanced polymers with solid brass contacts to provide high dielectric strength and unsurpassed timing accuracy. Custom-fit Blue Max spiral core wire set is factory terminated in the correct lengths with numbered I.D. tags, corrosion-resistant locking plug terminals and high-temperature silicone boots. The wire loom kit with separators and show-quality chrome brackets routes wires over the valve covers to keep them away from hot exhaust manifolds or headers. Kit includes HEI distributor cap and rotor, a coil cover, a Blue Max high-performance wire set, and super loom kit.
( 4 )
$200.99
Moroso DuraFire Replacement HEI Distributor Cap and Rotor Kits
Moroso replacement HEI distributor cap and rotor kits are molded from advanced polymers for high dielectric strength and precise timing accuracy. They're direct replacements for your Moroso DuraFire distributor.
Not Yet Reviewed
$48.99
Moroso Distributor Shim Kits
Moroso distributor shim kits are designed to adjust the distributor and improve timing accuracy while reducing wear. These kits are available for the distributor gear or the distributor housing. The distributor gear shims are made of steel and the distributor housing shims are made of nylon.
( 36 )
$12.31
—
$15.99
Moroso Ultra 40 Spark Plug Boot and Terminal Kits
Moroso Ultra 40 spark plug boot and terminal kits are manufactured from high-temperature silicone. They are available in straight, 90 degree, and 135 degree ends.
( 11 )
$29.99
—
$43.99
Moroso Remote Push/Pull Battery and Alternator Disconnect Kits
Moroso remote push/pull battery and alternator disconnect kits allow you to disconnect both the battery and the alternator feed simultaneously without the need for relays. Required for many classes, including NHRA and SCCA, these easy-to-mount disconnect kits provide racers with an accessible on/off switch to completely shut-off electrical power in case of an emergency. Kit includes the following components: * Master disconnect switch * Brackets * Swing arm linkage * 18 in. long aluminum tube actuator link * All necessary bushings and fasteners * Switch position decals and switch location decal for the exterior of vehicle
( 2 )
$142.42
—
$209.99
Moroso Ultra 40 Coil Wire Kits
Moroso Ultra 40 coil wire kits are available sleeved and unsleeved. The kits allow installation of an ignition coil in a remote location or they can be used as replacement wire in a wire set. They feature Moroso Ultra 40 high performance ignition race wire that maximizes energy transfer and minimizes EMI and RFI interference noise. It is available in blue or black. The unsleeved kits contain 72 in. wire, and the sleeved kits contains 48 in. wire with 48 in. high-temperature sleeving. Sleeving adds extra dielectric strength, extends spark plug wire life, and protects against exhaust heat, chaffing and contaminants. All Moroso Ultra 40 coil wire kits include: * 2 HEI 90-degree distributor boots * 2 HEI 90-degree spark plug boots * 4 HEI terminals * 2 Non-HEI 90-degree boots * 4 Non-HEI terminals * 2 coil boots
( 12 )
$37.99
—
$60.99
Moroso 4-Hole Loom Kits
Direct from Moroso are these 4-hole spark plug wire loom kits. These triple-process chrome plated brackets with high-temperature plastic separators keep plug wires away from exhaust manifolds, headers, and other trouble spots. They help prevent ignition crossfire by keeping wires evenly spaced, and are available in a variety of colors and wire diameter sizes.
( 16 )
$17.99
Moroso Ignition Coil Mount Bracket Kits
Moroso ignition coil mount brackets are designed for use with Moroso valve covers, but can be drilled to be used with other valve covers, or to remote-mount coils in a different location. These coil bracket kits may be used to relocate the LS coil between the top of the valve cover and the intake, and when used with Moroso valve covers, the valve cover can be removed and installed without disturbing the coils or brackets. Two versions are available: one for LS1/LS6 coils and the second for LS2, LS3, LS7, L92, L98, and L99 coils. The kits include black anodized aluminum brackets and hardware (one kit does one LS engine).
( 1 )
$157.99
—
$163.99
Moroso Coil Wire Kits
Moroso coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end as well as for the coil attachment.
( 5 )
$27.99
—
$45.99
Moroso Blue Max Spark Plug Boot and Terminal Kits
These Blue Max spark plug boot and terminal kits from Moroso are manufactured from high-temperature silicone. They are available in three different end configurations to suit your needs. These kits come in sets of eight with positive, locking spark plug terminals.
( 5 )
$27.99
—
$49.99
Moroso Alternator Shutdown Relay Kits
Moroso alternator shutdown relay kits are designed to stop engine run-on when the electrical master disconnect is turned off, by stopping electrical feedback in malfunctioning or high amperage alternators. They feature a heavy-duty solenoid rated at 250 amps, a mounting bracket, and terminals.
( 2 )
$135.99
Moroso Clamp-Style Wire Separator Kits
Moroso clamp-style wire separator kits will fit up to 8.65mm non-sleeved ignition wire. The looms are constructed of plastic and feature a split design with center retaining hardware. Moroso kits include an Allen wrench to loosen or tighten the center hardware, and come with two each 2, 3, and 4-hole separators.
( 4 )
$22.99
Moroso Blue Max Distributor Boot and Terminal Kits
Moroso Blue Max distributor boot kits are manufactured from high dielectric strength EPDM to provide excellent insulation. They are available for socket-style or male/HEI-style distributor caps. The socket-style boots feature brass terminals to provide maximum corrosion resistance, while providing high conductivity. The male/HEI boots use a positive locking terminal that won't fall off under high vibration or racing conditions.
( 2 )
$27.99
Moroso Street Dress-Up Spark Plug Wire Kits
Moroso street dress-up spark plug wire kits contain one set of Moroso Blue Max spiral core spark plug wires, four 2-hole wire looms, four chrome loom brackets, six spark plug separators, and a chrome distributor hold-down. These kits are designed to route the wires over the top of the valve cover and down to the spark plug on engines equipped with exhaust headers.
Not Yet Reviewed
$145.99
—
$171.99
Moroso Replacement Battery Terminal Cap Kits
These replacement battery terminal cap kits are designed for use with your Moroso remote battery jumper terminal. These caps are sold two to a pack, with one red and one black cap included.
( 1 )
$25.99
Moroso Battery Cable Kits
Moroso battery cable kits are just what you need if you are relocating your battery. Their high-grade copper cable provides unrestricted current flow and comes in the famous Moroso blue. Their rugged PVC insulation resists underhood and undercar fuels, oils, and debris. The kits include a cable, terminals, 12-gauge leads, grommets, insulated clamps, and shrink sleeving.
Not Yet Reviewed
$194.99
—
$265.99
Moroso Spark Plug Wire Separators
Moroso spark plug wire separators protect your plug wires from contacting hot engine components, and prevent ignition crossover by holding them away from one another. These separators snap into place with slight pressure and can be used to route wires just about any way you can think of. The high-temperature plastic separators securely grip the plug wires and are available in a variety of colors.
( 156 )
$16.99
—
$28.99
Moroso Super Looms Wire Looms
Moroso's Super Looms wire looms can help keep your engine bay looking neat and orderly—as well as prevent ignition crossfire by keeping the plug wires spaced apart. These looms place your spark plug wires safely out of the way of hot headers or exhaust manifolds. They feature chrome plated brackets for stout valve cover mounting, and high temperature plastic separator looms to securely grip the spark plug wires. Moroso Super Looms are available in a variety of colors and styles for fitment with most engines.
( 124 )
$27.99
—
$46.06
Moroso Universal Wire Looms
Moroso universal wire looms keep your spark plug wires where they belong. They'll prevent burning wires with headers or exhaust manifolds, keep your engine neat and orderly, and prevent crossfire by keeping the wires spaced apart. They feature chrome plated brackets for stout valve cover mounting and high temperature plastic looms. They're available in a variety of colors and styles.
( 14 )
$17.99
—
$24.99
Moroso High-Temp Under Header Wire Looms
Moroso high-temp under header wire looms are designed to withstand high temperatures associated with headers and route the wires below the heat. Since hot air rises, the wires stay cooler and give the engine a cleaner look. They include chrome plated brackets, high-temp wire separators, and mounting bolts.
( 23 )
$46.99
