Availability
Moroso offers a variety of wet sump baffled oil pans for road racing, drag racing, street and strip, and Circle Track applications. They're available for a variety of year/make and engine applications. Control your vital lubricant in extreme driving situations with a replacement or upgrade Moroso wet sump baffled oil pan.
( 22 )
$539.08
—
$785.99
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 409 )
$508.99
—
$1,002.99
Replace a worn out or old rear oil passage plug with Moroso oil galley barbell plugs. Your vehicle's old plug could be allowing dirty engine oil to bypass the oil filter. Moroso's improved design features a secondary O-ring to seal dirty oil from flowing to the engine bearings. These dog bones also have a smaller shaft diameter than the OEM piece to minimize any flow restriction. Moroso's oil galley diverters are machined from billet aluminum, not plastic like the original OE piece, and are supplied with quality, high-temperature rated Viton® O-rings to withstand all types of engine oils and compression cycles. Whether you call them passage plugs, dog bones, or barbells, these Moroso components can be easily removed from the engine block once installed with its 4mm threaded hole.
( 4 )
$22.99
—
$23.99
Moroso louvered windage trays are designed to allow oil thrown from the rotating assembly to drain into the sump, without splashing back and creating power-robbing drag. Made from heavy-gauge steel, they are PTFE coated for quick drainage.
( 26 )
$144.99
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 57 )
$850.99
—
$991.99
Moroso LT swap oil pan kits include anti-slosh baffle, windage tray, oil pickup, required sealing gaskets and O-rings, as well as mounting hardware. Perfect for retrofitting wet sump Gen V LT motors (LT1/LT4/L83/L86) into other applications, the cast aluminum pans offer a 6-qt. capacity and feature an integral 22mm spin-on oil filter provision with oil cooler port ideal for use with a Moroso or OEM equivalent filter, along with a 1/2 in. NPT drain-back provision.
Not Yet Reviewed
$355.99
These Moroso oil pump pickup assemblies feature a screened opening that eliminates the need for a separate pickup tube. They also bolt to the bottom cover of any stock type oil pump. Oval track assemblies are specially offset to the passenger-side of the sump for optimum scavenging. All of the necessary hardware is included.
( 2 )
$180.99
—
$232.99
Moroso engine oil filter adapters for GM LS are designed to replace the factory spin-on oil filter mount on your engine, allowing for different type plumbing options than what was initially provided with the specific oil pan model originally. These billet aluminum spin-on style oil filter adapters feature an anodized finish with an NPT oil pressure port, and include the mounting hardware and engine block sealing O-rings. Order the model best suited for your vehicle.
( 2 )
$104.99
—
$136.99
Moroso offers LS oil pump and oil pickup bolt kits for a variety of Chevrolet engine applications from 1997 and up. These kits make it more convenient and remove some of the guesswork of assembling a new GM LS-based build or rebuilding a GM LS engine. Each kit (38306) includes four oil pump to engine block mounting bolts and one bolt for oil pump pickup to oil pump. The bolts are Grade 10.9 (metric equivalent to Grade 8), "flange head" style and have a clear zinc finish.
Not Yet Reviewed
$18.99
Moroso oil pan stud kits make pan installation easy and prolong gasket life. Locking nuts feature attached washers with serrated faces to provide a positive grip on the pan rail. The studs are made of heat-treated Grade 8 steel with black oxide finish, and cadmium and zinc plated nuts. These are also available in a bullet nose version which are rounded on one end for easier starting of oil pan mounting nuts.
( 19 )
$27.99
—
$41.99
Moroso drag/road racing oil pans are made with thick, precision laser-cut steel rails, and feature a 7 quart capacity that moves oil away from your rotating assembly, offering excellent oil control and horsepower savings. The pans' race-proven diamond shape, four trap door assembly, and anti-slosh baffles keep your oil contained in the oil pump pickup area during road and drag racing. Moroso drag/road race oil pans have a billet aluminum adapter with a 1/4 in. NPT sensor port that allows a 13/16th thread Moroso or OEM filter to be mounted in the stock location--no need to run a remote oil filter. These pans use a stock dipstick.
( 39 )
$534.99
The nation's top engine builders rely on Moroso racing oil pumps because of their superior design and ability to provide consistent oil flow. They're designed to handle the extra demand required from higher engine speeds. Special anti-cavitation slots, feeder grooves, and an enlarged bypass area are machined into the housing to bleed oil back to the inlet side of the pump. They feature proprietary cast housings fitted with precision-machined gears and a precision-ground shaft for outstanding oil delivery. Each pump is 100 percent pressure-tested to stringent quality control specifications to ensure that the pump you receive will perform flawlessly.
( 8 )
$133.99
—
$301.99
Moroso remote oil filter adapters are designed to plumb remote oil filters and oil coolers. The fitting direction is adjustable for the best clearance.
( 12 )
$139.99
Moroso vacuum pump/dry sump pump drive kits are designed to accommodate almost any race engine combination. These steel mandrels bolt directly onto the hub or balancer to provide rigid pulley mounting.
( 19 )
$247.99
—
$322.99
Moroso extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans and constructed of steel, they are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.
( 129 )
$100.99
—
$235.99
Moroso PCV air/oil separators will help increase your engine's performance. These air/oil separators will capture excess oil and keep it out of your intake tract so that your engine will breathe cleaner intake air--better air equals better performance. Moroso offers universal and custom fit versions in small and large body sizes. The large bodies, besides having more capacity, feature a bottom drain with an elbow that makes draining the collected oil virtually mess-free. Their polished billet aluminum bodies can be chromed, painted, or powdercoated. The small units offer a 2-piece body that unscrews for draining and are available raw or with polished or anodized finishes.
( 326 )
$190.99
—
$265.99
Help your engine breathe better with Moroso valve cover filtered breathers. They are available in half-hooded styles for extra protection from dirt and debris, and non-hooded designs for when that added shielding isn't necessary. Both styles provide serious protection against dirt and airborne debris without restricting airflow. These breathers also come in either a push-in or clamp-on style; both are cleanable and reusable.
( 21 )
$60.18
—
$102.99
Moroso billet aluminum valve covers are CNC-machined from a billet aluminum bar to make them lightweight without sacrificing strength. Their airtight sealing allows the engine to pull greater vacuum for improved ring seal and power. The covers are available plain or with the Moroso logo, natural or black anodized—and mount with either a centerbolt or perimeter bolts. Order the pair designed for fitment with your vehicle and engine application.
( 2 )
$594.99
—
$1,119.99
Secure your oil pump pickup with bolts from Moroso. They offer Grade 10.9 (Metric equivalent to Grade 8) fasteners with flange-heads and a clear zinc finish. Order the quantity needed.
Not Yet Reviewed
$9.62
Moroso has done it again with these alternator and vacuum pump mounting bracket kits. They feature two separate mounts incorporated into one billet aluminum frame, with belt adjustment for both the alternator and the vacuum pump. Specifically designed for use with an electric water pump, the Moroso alternator and vacuum pump mounting bracket kits eliminate the need for any other types of bracketry. They come available for Moroso, CSR Performance, and Meziere electric water pumps. All mounting hardware and spacers are included, so they will install with most old and new-style drive mandrel kits.
( 2 )
$489.99
Moroso evacuation system valve cover adapter fittings are designed for the crankcase evacuation kits. They provide an easy way of adding a -12AN male fitting to OEM GM LS engines with an oil fill bung in the valve cover. Just remove the oil fill bung, screw in the fitting and tighten down with built-in hex nut.
( 1 )
$77.99
—
$87.99
Moroso circle track oil pans pans are manufactured in wet and dry sump configurations and include various levels of horsepower gain, ranging from Hobby Stock to NASCAR Winston Cup. They are available in a selection of quality materials and are a great economical choice for your performance engine.
( 5 )
$910.99
—
$1,071.99
Moroso breather tanks are great for low vacuum venting. They're offered in a choice of sizes to suit your application needs, and may be modified for additional fitting for dual vent hoses. These high-strength, lightweight aluminum breather tanks feature a 2 in. breather filter mounted on top and an aluminum bottom drain fitting and ball valve.
( 110 )
$258.99
Racers who use the latest cylinder heads or want a unique look for their engines—or both—can now find quality, lightweight aluminum valve covers at an affordable price. These Moroso fabricated aluminum valve covers have thick billet rails for superior gasket sealing and resistance to warping. They mount through tubes welded directly to the valve covers—to help maintain gasket-rail flatness and prevent leaks. The covers feature a tall design that will clear all rocker combinations, as well as stud girdles. Some models have built-in oilers to keep valve springs cooler in oval track racing. Order the model designed for your vehicle and engine application.
( 24 )
$1,426.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
