Availability
Mittler Brothers rear-end narrowing tool kits are designed to narrow your vehicle's rear-end for racing or street rod applications using precision-made tools. They include a 1 1/2 in. diameter turned, ground, and polished shaft that is passed through the trimmed rear-end housing (not included) and the inner bearing blocks. This ensures the accurate, square, and true, reinstallation of the housing ends. The kits feature a pinion centering plate and a variety of alignment blocks for specific housing ends, including Ford 9 in., Ford 8.8 in., 10-bolt GM, 12-bolt GM, Dana 44, Dana 60, and 8 3/4 in. Chrysler.
( 11 )
$720.00
Mittler Brothers' shrinker/stretcher with foot operation stand leaves your hands free to move the metal. These quality-built sheetmetal tools allow you to work the metal to the perfect angle. Shrink metal for inside angles, and stretch it for outside angles easily, using your hands and feet with Mittler Brothers foot-operated shrinker/stretcher shop machines. Maximum capacities: * 16 gauge (.059 in.) Mild Steel * 14 gauge (.064 in.) Aluminum * 19 gauge (.043 in.) Stainless
( 5 )
$795.00
Mittler Brothers B1 throatless Beverly shears are ideal for all-purpose metal cutting tools. They permit any desired cut in heavy-gauge materials while still handling lighter gauges without distortion. Specs: * 14-gauge mild steel capacity * 18-gauge stainless steel capacity * 18 in. height (less handle) * 18 lbs. * 4 1/4 in. blade length
Not Yet Reviewed
$667.00
Make your own customized panels with Mittler Brothers louver punch startup kits. They are designed to punch a perfectly shaped and functional louver into a piece of material. The kits are available in two distinct designs: the standard louver offers a more conventional shape, and the unique dome shaped louver gives you a wide and more functional dome shaped opening. They will punch out precise louvers every time and can be used on material up to 16-gauge steel.
Not Yet Reviewed
$749.80
Mittler Brothers punch and flare tool sets are designed to give your sheet metal a unique, clean look. Just drill a pilot hole for the draw bolt and then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. They can also be used as a hole punch, simply by using the punch and die. These sets can be used on aluminum material with a thickness of 0.040 in. to 0.062 in., mild steel with a thickness of 0.040 in. to 0.062 in., and stainless steel with a 0.040 in. thickness.
( 18 )
$662.40
Mittler Brothers standard power kits assist your shrinkers and stretchers, so you can work easier and with more control. The rugged construction of these units allows you to use the traditional hand-operated shrinkers/stretchers by pneumatic operation, via the included foot pedals. That means your hands stay on your project for maximum working efficiency. The cylinders feature quick-release pins for fast changeovers.
Not Yet Reviewed
$506.00
Is your jaw set broken or damaged? Mittler Brothers replacement jaw sets will fix the problem. They are manufactured from quality materials and are available in two configurations--one to shrink the material and the other to stretch the material.
Not Yet Reviewed
$604.99
Mittler Brothers handheld shrinker and stretcher sets are offered in a standard and in a heavy-duty model. Both allow you to shrink in place without removing work piece, and they work great on large panels to prevent distortion. Maximum capacity: *Standard set includes shrinker/stretcher dies -- 20-gauge (.035 in.) mild steel -- 16-gauge (.050 in.) aluminum * Heavy-duty model—no jaws included -- 18-gauge (.047 in.) mild steel -- 14-gauge (.064 in.) aluminum
Not Yet Reviewed
$621.00
Mittler Brothers Bend-Tech SE software is designed for large-scale commercial tube-bending projects and can do a whopping 50 bends per part. Features: * Customizable tooling library * Customizable material library * Downloadable additional templates * 2-D custom part template * Shaded part diagram * Cut lengths and weight results * Bend angle results * Start, end, or center bend results * Printed setup sheet * 50-bend limit * Calibration wizard * Tri-Star input window * Zooming, panning, and rotating of 3-D shaded model * Rotation of results * Reverse bending order * Flip tube in mid-production * Bending simulation * Movement transition setup sheet * Trig calculator * Assembly design * Notching module * Assembly dimensioning * Can do inches and millimeters * XYZ interface * Multiple radii for single part * Crowning (for roll bending) * Graphical layout for results * Fraction chart * Angle and rotational output tolerances up to three decimal places * LRA output
Not Yet Reviewed
$575.00
Mittler Brothers 90 degree pipe bender shoe sets are specifically designed for use with Mittler Brothers hydraulic 90 degree tubing benders. They are available to fit a variety of pipe diameters, with specific corresponding radii to match. The shoe sets come in three separate styles--one for round tube, one for square tube, and one for pipe. Finish off your tubing project with one of these Mittler Brothers 90 degree pipe bender shoe sets.
Not Yet Reviewed
$506.00
Mittler Brothers manual arbor presses for metal fabrication can be used as a standard or arbor press, can be mounted on any stable surface using the included hole drill template, or mounted on either side of Mittler's 2-sided manual bench press. Features and contents include: * 3 in. deep throat 3 in. maximum clearance between tooling * Rugged 5/16 in. welded plate construction * Bronze bushings for long life * Mount tooling for straight-in use or rotate 90 degrees for side-to-side use * Maximum capacity: 3 in. punch and flare—16-gauge mild steel * One spring loaded center * One lower punch/flare adapter and bolts * One upper punch/flare adapter and bolts
Not Yet Reviewed
$639.40
Don't have the right size shoe for your bender? Mittler Brothers 180 degree pipe bender shoe sets help you solve the problem. They are available for both round and square tubing and come in different radii, depending on the pipe diameter that you're bending.
Not Yet Reviewed
$575.00
Mittler Brothers English Wheel anvil wheels are CNC-machined in-house. They are manufactured from heat-treated steel and are then hard-turned for the best possible finish and concentricity. The wheels are available in a variety of sizes to suit your project's sheet metal needs.
Not Yet Reviewed
$510.60
Mittler Brothers bead roll sets are compatible with all their bead rollers. CNC-machined from heat-treated steel for long life, these bead roll sets are available in a variety of shapes and sizes, to create any type of bead desired. Add a clean, precise rolled bead to your aluminum or steel fabricated panels with the help of Mittler Brothers bead roll sets.
( 24 )
$575.00
Mittler Brothers punch and bead tool sets are designed to give your sheet metal a standout design. These versatile tools are for use in a press, or simply drill a pilot hole for the draw bolt and then apply the tool and tighten the bolt for a smooth, beaded hole in one easy step. The tool can also be used as a hole punch, simply by using the punch and die. These sets can be used on aluminum material with a thickness of 0.040 in. to 0.062 in., mild steel with a thickness of 0.040 in. to 0.062 in., or stainless steel with a 0.040 in. thickness. Make any job easier with the right tools from Mittler Brothers.
Not Yet Reviewed
$662.40
Mittler Brothers dimple dies add enhanced appearance and strength to your panels. They're engineered to flare or flange, and will work panels of 0.125 in. thick mild steel and 4130 chromoly material. Machined from steel with a black oxide finish, they produce a 45 degree flare/dimple angle. You can choose individual dies or purchase them in several sets that are available.
( 4 )
$501.40
—
$685.40
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
