Availability
To protect your investment, you'll want to mount your headers with strong, reliable, quality hardware. Milodon header bolts fit the bill. They are made from rugged Grade 8 steel for extra-high strength and are heat-treated for added reliability. They have compact 3/8 in. hex heads, which allow for the use of a standard socket in those tight areas around and between header tubes. They also have a bright, classy looking gold iridited finish to complete the visual package.
( 54 )
$12.95
—
$18.95
Milodon valve cover hold-down tabs are designed to spread bolt load so as not to distort your valve covers. This, in turn, helps to provide a better seal and fewer leaks. These hold-down tabs have a chrome plated finish and are designed for use on Milodon chrome valve covers.
( 17 )
$20.95
Milodon oil pan bolt kits were specially designed to firmly hold oil pans in place and not loosen up. They feature a built-in washer face with case-hardened serrations. The washer face and small head permit the use of a socket wrench for quick and accurate installation. They can be reused time and time again.
( 63 )
$10.95
—
$16.95
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 47 )
$18.95
—
$19.95
These Milodon compact 3/8 in. hex head bolts allow for the use of standard non 12-point socket wrenches, yet are easy to work with in tight quarters. These heat-treated intake bolts come complete with washers.
( 21 )
$14.95
—
$18.95
Milodon timing cover gasket sets are designed for use with Milodon, OE, and aftermarket front timing covers. These gasket sets include the cover gasket, water pump gaskets, bolts, and a seal.
( 19 )
$16.95
—
$19.95
Milodon offers these valve cover stud kits for both universal and vehicle-specific applications. They're available in a variety of thread sizes, lengths, and quantities. The steel studs come with hex nuts for easy installation.
( 23 )
$14.95
—
$20.95
Milodon balancer bolts are necessary components for any serious engine builder. When a balancer is not properly attached, not only is it dangerous, but it will not do its job of protecting the crack bearings properly. These Grade 8, heat-treated, and thread-rolled steel bolts feature a hex-style head for easy torquing and engine turning by hand. They come available in different thread sizes and underhead lengths to best suit your application needs.
( 30 )
$13.95
Milodon oil pump pickups are engineered for maximum flow and long-term durability, even in the most extreme applications. They use precision-bent, thick-walled tubing with a larger-than-stock inside diameter—which is heliarc-welded to Milodon's own high-flow, compact-design pickup head. All oil pump pickups receive either a gold iridited or black powdercoat finish for ultimate durability against corrosion. Over a hundred models are available; order the pickup recommended for your year/make and engine application, oil pan style and depth, and other options.
( 229 )
$17.95
Additional "free" horsepower can be found by the installation of Milodon crankshaft scrapers. They'll remove any excess oil left on the crank and rods that the windage tray doesn't remove. The scrapers require fitting to individual crank and rod profiles, as well as to engine stroke. The wipers should be fitted to within .045 in. from rods and .035 in. from crank counterweights. When installed, the scrapers are sandwiched between pan rail and block.
( 2 )
$18.95
Swap out your leaky stock timing chain cover with one of these stylish, high-quality Milodon timing covers. CNC-machined from quality steel, each timing cover is precision-checked for the proper placement of the seal and dowel pins to avoid leaks and to ensure an exact fit. Order the model you need.
( 104 )
$19.95
Milodon offers nearly 20 types of timing gear drive replacement parts for specific year/make and engine applications. Direct-fit components include cam covers, gears, and hubs; crank gears; bushings, bearings, seals, and hardware; main housings; idler axles, gears, and retainers; mounting plates and more. Order the replacement parts recommended for your timing gear drive.
( 9 )
$10.95
—
$15.95
You can count on Milidon to pay attention to detail. Their air cleaner nuts are CNC-machined from billet aluminum and they are clear anodized to provide a long-lasting "just machined" finish.
( 8 )
$12.95
Great for the garage, shop, club meetings, track, or den; these Milodon banners let you show your pride for one of your favorite manufacturers.
Not Yet Reviewed
$19.95
Don't let oil go to your head! Milodon oil flow restrictor plugs solve the common high performance engine problem of too much oil in the head area. They restrict approximately 75 percent of the oil to the top end of the engine for better lubrication and prevent oil wastage at the lifters (which will cause windage problems). This also keeps the sump better supplied with oil. These plugs install easily into the back of the block in place of the stock plugs. They're not for use with hydraulic lifters.
( 1 )
$14.95
Milodon pressure plate bolts are Grade 8 heat-treated 8740 chromoly fasteners with a black oxide finish to provide the safety and strength that you need. These OE-style hex-head bolts fit most Borg and Beck, long-style, and diaphragm clutches; lockwashers are included with each set. The quality of your pressure plate bolts is important—choose the dependability of Milodon.
( 4 )
$12.95
If you get a new set of Milodon valve covers, you'll want matched breathers to go with them. These push-in style accessories are available to fit a variety of hole sizes. They're finished with a deep chrome polish; and most models include a rubber grommet.
( 4 )
$10.95
—
$13.95
Milodon offers top-quality replacement gear drive service parts, such as these 5/16 in. dowel pins. They are used extensively in automotive applications for retaining a part in a fixed position or to preserve alignment.
Not Yet Reviewed
$14.95
Milodon oil pump stud kits are a must for high performance and racing engines. Centerless ground from 8740 chromoly steel, they feature rolled and heat-treated threads, a ground washer, and a Grade 8 nut.
( 2 )
$11.95
Milodon carb studs feature premium quality rolled threads, Milodon innovated "starter nose" to ease thread starting and vibration proof locking washer faced nuts. Studs are black oxided and nuts are silver.
( 6 )
$12.95
—
$13.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
