Availability
Milodon oil pans are stock replacements for factory oil pans and are perfect for your restoration projects. They're also ideal for engines that are not intended for racing and just need a new stock-style pan. These American-made pans offer an excellent fit and flat, un-warped pan rails, unlike imported pans. They feature internal baffling to keep oil in the sump and free up additional horsepower and are available for most domestic V8 engines.
( 188 )
$209.95
—
$214.95
Milodon Street and Strip oil pans are designed for performance street as well as drag strip applications. They will fit most stock chassis and steering, as well as most headers. These well-engineered oil pans feature internal baffling that can free up additional horsepower. They're available in deep-sump and low-profile designs and are a necessity where high-volume oil pumps and increased rpm ranges are used.
( 254 )
$259.95
—
$549.95
Milodon high volume/high pressure oil pumps provide a 20 to 30 percent increase in both volume and pressure, where most heavy duty and performance applications require an increase in both areas. Increased bearing loads, rpm, and horsepower all place greater a demand on the oil system, which if not up to the job, can cause premature engine failure. All Milodon oil pumps are 100 percent flow-tested to assure you the quality your engine demands.
( 28 )
$113.95
—
$119.95
These Milodon stainless steel oil dipsticks are CNC-machined from billet stainless steel to stay bright and rust-free. All dipsticks feature an O-ring seal top and bottom to positively seal against water & dirt. The braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 180 )
$92.95
—
$129.95
Milodon timing-gear drive assemblies are designed for all-out competition, but work equally well in any application. Their proven fixed idler gear system is capable of maintaining consistent cam timing without siphoning off power the way 4-gear types can. Timing changes are easy via Milodon's adjustable bolt pattern cam gears and hub assemblies. Made for strength and durability, these gear drives will last indefinitely. They are available in a flat-cover style, which uses a stock-type water pump, or an injected/blown style, which doesn't use a stock-type pump.
( 15 )
$829.95
—
$924.95
Milodon marine oil pans are designed to provide optimum performance for all applications. They're available for flywheel aft and forward installations, are fully baffled, trap-doored, and include windage trays. They are made from extra-heavy gauge steel to withstand extreme use and carry large oil capacities for high-rpm prop boats or high-load, heat-creating jet drive boats .
( 6 )
$599.95
—
$729.95
Milodon oil pump pickups are engineered for maximum flow and long-term durability, even in the most extreme applications. They use precision-bent, thick-walled tubing with a larger-than-stock inside diameter—which is heliarc-welded to Milodon's own high-flow, compact-design pickup head. All oil pump pickups receive either a gold iridited or black powdercoat finish for ultimate durability against corrosion. Over a hundred models are available; order the pickup recommended for your year/make and engine application, oil pan style and depth, and other options.
( 231 )
$19.95
—
$136.95
Milodon windage tray stud kits are required to mount a windage tray assembly correctly. The adjustable mounting feature allows you to position the tray as closely as possible to the rotating assembly (minimum 1/10 in.), so the tray can work at its maximum potential. You can also adjust your tray to avoid interference with the oil pan (special torquing requirements apply, and the tray must lie naturally flat after positioning nuts are torqued). These fasteners are available individually or in larger quantities, and are designed for fitment on a wide range of make/model engine applications.
( 39 )
$27.95
—
$114.95
Milodon drag race oil pans ensure an ample supply of lubricant under rapid acceleration. These pans have a full-length louvered windage tray and double trap doors to provide a positive oil control system. This results in consistent oil pressure and significant horsepower output increases. They also feature durable steel construction and a gold iridited finish.
( 18 )
$552.93
—
$799.95
A good oil pump is the cheapest insurance you can buy. Milodon small block Chevy high/standard volume oil pumps were built with engineering expertise to provide the highest level of quality and reliability available. The improved housing is made of a G-10 material with 40,000 psi tensile strength. G-10 is the same rugged material that brake rotors are made of. The neck is thicker than standard pumps to improve strength and end pump neck breakage under severe conditions. They're engineered to perform well in low or high-rpm applications and are CNC-machined for precise tolerances. Every pump is 100 percent flow-tested.
( 33 )
$96.95
—
$112.95
To protect your investment, you'll want to mount your headers with strong, reliable, quality hardware. Milodon header bolts fit the bill. They are made from rugged Grade 8 steel for extra-high strength and are heat-treated for added reliability. They have compact 3/8 in. hex heads, which allow for the use of a standard socket in those tight areas around and between header tubes. They also have a bright, classy looking gold iridited finish to complete the visual package.
( 54 )
$13.95
—
$19.95
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 48 )
$30.95
—
$32.95
Milodon offers these valve cover stud kits for both universal and vehicle-specific applications. They're available in a variety of thread sizes, lengths, and quantities. The steel studs come with hex nuts for easy installation.
( 23 )
$23.95
Milodon rugged crushproof premium oil pan gaskets can be used with gasoline, alcohol, and race fuels. They won't crush, split, shrink, or squeeze out like other gaskets. What's more, Milodon says you couldn't tear them, even if you tried.
( 131 )
$25.95
—
$25.99
Simple logic says that one of the best ways to avoid oil pan leaks is to make the pan gasket one piece. That's the philosophy behind Milodon's one-piece pan gaskets. They end leaks at the corners, where multi-piece gaskets often fall down on the job. Molded in one continuous piece of rubber, with steel inserts around each bolt hole, the bolts can be securely tightened but not over-tightened. Because of this construction, these gaskets are reusable.
( 22 )
$42.95
—
$50.95
Do you have a new timing cover, or one that lacks a timing pointer? If so, then you clearly need a great looking pointer to complete the package. Milodon has the perfect accent to your timing cover. They will look great with your cover and are marked off with a wide span of degrees both before and after TDC, so you can get the precise timing setting that you need.
( 52 )
$7.95
—
$78.95
Milodon exclusive Diamond Stripper design windage trays features hundreds and hundreds of small louvers that quickly scavenge oil from crankshaft rotation, but prevents reversion common to screen-type windage trays. They are completely finished, gold irridited, and require no additional fitting for installation. Extensive dynometer and on-track testing verifies that these windage trays out-perform other screen type trays on the market. They permit rapid oil return and protection from oil splash-back, while providing increased power by reducing windage.
( 12 )
$122.95
—
$159.95
Milodon Pro Touring oil pans are designed to provide an adequate oil supply during the rapid acceleration, hard deceleration, and violent turns common to motorsports. The replacement pans are available in dozens of sizes, configurations, and options. Order the model recommended for your vehicle.
( 44 )
$559.95
—
$639.95
Milodon valve cover hold-down tabs are designed to spread bolt load so as not to distort your valve covers. This, in turn, helps to provide a better seal and fewer leaks. These hold-down tabs have a chrome plated finish and are designed for use on Milodon chrome valve covers.
( 17 )
$24.95
Milodon oil pan stud kits are undoubtedly the best choice for attaching your Milodon oil pan. They include heat-treated studs with rolled threads and special nuts with built-in serrated washer faces. These kits provide easy pan installation and prolonged gasket life, and their special serrated nuts guard against pan loosening during operation.
( 30 )
$36.95
—
$45.95
Swap out your leaky stock timing chain cover with one of these stylish, high-quality Milodon timing covers. CNC-machined from quality steel, each timing cover is precision-checked for the proper placement of the seal and dowel pins to avoid leaks and to ensure an exact fit. Order the model you need.
( 106 )
$22.95
—
$49.95
These Milodon LS & Gen III oil filter relocation kits allow you to choose a new spot to mount your oil filter. They include two 36 in. hoses that can handle a working pressure of 250 psi, and aluminum AN-style fittings for a leak-free connection. Designed specifically to fit late model Chevy V8 engines, the Milodon LS & Gen III oil filter relocation kits make moving your oil filter easy.
( 3 )
$250.95
Milodon premium roller timing chains are equal to and, in most aspects, exceed OEM-quality specifications. They feature a double-wide non-split roller design to allow for easier chain movement, yielding increased performance and longevity. These timing chains come in application-specific designs to ensure an exceptional fit, superior strength, and quality performance for your ride.
( 9 )
$87.95
—
$103.95
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 220 )
$136.95
—
$205.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
