Availability
Milodon Street and Strip oil pans are designed for performance street as well as drag strip applications. They will fit most stock chassis and steering, as well as most headers. These well-engineered oil pans feature internal baffling that can free up additional horsepower. They're available in deep-sump and low-profile designs and are a necessity where high-volume oil pumps and increased rpm ranges are used.
( 252 )
$259.95
—
$569.95
Milodon oil pans are stock replacements for factory oil pans and are perfect for your restoration projects. They're also ideal for engines that are not intended for racing and just need a new stock-style pan. These American-made pans offer an excellent fit and flat, un-warped pan rails, unlike imported pans. They feature internal baffling to keep oil in the sump and free up additional horsepower and are available for most domestic V8 engines.
( 187 )
$209.95
—
$359.95
Milodon Pro Touring oil pans are designed to provide an adequate oil supply during the rapid acceleration, hard deceleration, and violent turns common to motorsports. The replacement pans are available in dozens of sizes, configurations, and options. Order the model recommended for your vehicle.
( 44 )
$499.95
—
$639.95
These Milodon stainless steel oil dipsticks are CNC-machined from billet stainless steel to stay bright and rust-free. All dipsticks feature an O-ring seal top and bottom to positively seal against water & dirt. The braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 176 )
$86.95
—
$124.95
Milodon high volume/high pressure oil pumps provide a 20 to 30 percent increase in both volume and pressure, where most heavy duty and performance applications require an increase in both areas. Increased bearing loads, rpm, and horsepower all place greater a demand on the oil system, which if not up to the job, can cause premature engine failure. All Milodon oil pumps are 100 percent flow-tested to assure you the quality your engine demands.
( 28 )
$79.99
—
$125.95
Milodon 4x4 truck and off-road oil pans are designed for tough trucks and extra-rough terrain. The sump for these pans has been moved to the rear, for better oil control and more front differential clearance in long travel applications. These pans feature full horizontal baffling for oil control, and a large capacity to help control oil temperature. Unlike the competition, Milodon gives you an internal and external finish for corrosion protection. Milodon delivers a tough pan, whether your truck is used for street or full-on off-road racing.
( 29 )
$339.95
—
$499.95
Milodon timing-gear drive assemblies are designed for all-out competition, but work equally well in any application. Their proven fixed idler gear system is capable of maintaining consistent cam timing without siphoning off power the way 4-gear types can. Timing changes are easy via Milodon's adjustable bolt pattern cam gears and hub assemblies. Made for strength and durability, these gear drives will last indefinitely. They are available in a flat-cover style, which uses a stock-type water pump, or an injected/blown style, which doesn't use a stock-type pump.
( 15 )
$479.95
—
$924.95
Milodon oil pump driveshafts are CNC-machined from 4130 chromoly and are centerless-ground to avoid stress risers. These race-proven shafts eclipse breakage-prone stock units that frequently fail when used with high-volume oil systems, heavy racing oil, or high-rpm applications. The ends are induction heat-treated to reduce wear.
( 42 )
$24.95
—
$218.95
Milodon billet aluminum big block Chrysler oil pumps are designed for all applications, including stock engines, Pro Street, and drag racing. They can be used with stock internal and external pickup systems. These pumps are manufactured from 6061 aircraft grade aluminum and then black anodized for maximum protection. Milodon billet aluminum big block Chrysler oil pumps provide more volume, yet require less horsepower to turn. They use stock-length oil pump driveshafts. A billet aluminum oil pump cover is sold separately.
( 9 )
$257.95
Milodon drag race oil pans ensure an ample supply of lubricant under rapid acceleration. These pans have a full-length louvered windage tray and double trap doors to provide a positive oil control system. This results in consistent oil pressure and significant horsepower output increases. They also feature durable steel construction and a gold iridited finish.
( 18 )
$554.95
—
$789.95
Milodon oil pump pickups are engineered for maximum flow and long-term durability, even in the most extreme applications. They use precision-bent, thick-walled tubing with a larger-than-stock inside diameter—which is heliarc-welded to Milodon's own high-flow, compact-design pickup head. All oil pump pickups receive either a gold iridited or black powdercoat finish for ultimate durability against corrosion. Over a hundred models are available; order the pickup recommended for your year/make and engine application, oil pan style and depth, and other options.
( 229 )
$17.95
—
$170.95
Milodon Gen III Hemi Pro Touring oil pans are designed to provide an adequate oil supply during the rapid acceleration, hard deceleration, and violent turns common to motorsports. The replacement pans are available in dozens of sizes, configurations, and options. Order the model recommended for your specific application.
( 4 )
$499.95
—
$609.95
A good oil pump is the cheapest insurance you can buy. Milodon small block Chevy high/standard volume oil pumps were built with engineering expertise to provide the highest level of quality and reliability available. The improved housing is made of a G-10 material with 40,000 psi tensile strength. G-10 is the same rugged material that brake rotors are made of. The neck is thicker than standard pumps to improve strength and end pump neck breakage under severe conditions. They're engineered to perform well in low or high-rpm applications and are CNC-machined for precise tolerances. Every pump is 100 percent flow-tested.
( 33 )
$101.95
—
$104.95
Milodon windage tray stud kits are required to mount a windage tray assembly correctly. The adjustable mounting feature allows you to position the tray as closely as possible to the rotating assembly (minimum 1/10 in.), so the tray can work at its maximum potential. You can also adjust your tray to avoid interference with the oil pan (special torquing requirements apply, and the tray must lie naturally flat after positioning nuts are torqued). These fasteners are available individually or in larger quantities, and are designed for fitment on a wide range of make/model engine applications.
( 39 )
$23.95
—
$99.95
Milodon external oil systems allow for the bypassing of irregular and restrictive stock internal oil passages. They also allow for the placement of the pickup in an optimum position, plus the use of free-flowing braided line. These kits are available with static or swivel pickups with single or dual lines, and with oil pumps with different levels of output. They provide the optimum in oiling for all types of competition and come complete with all necessary bolts, fittings, O-rings, etc., for installation. A Milodon oil pan, windage tray and oil pump drive shaft will complete the package. In some cases, notching the frame is required.
( 4 )
$475.95
—
$669.95
Milodon billet aluminum oil pump covers feature a one-piece design that requires no gaskets or O-rings for installation. They are CNC-machined from billet 6061 aircraft aluminum and then anodized for protection. These covers are available in two styles--one for Hemi-type motor mounts and one for Wedge-type motor mounts. The Milodon billet aluminum oil pump covers are designed for use with external oil pickup line systems.
( 9 )
$249.95
—
$359.94
Milodon aluminum timing covers feature either a highly polished or CNC-machined face. Their rigidity offers a positive, non-flexing cam stop. They are designed to fit over stock and double roller timing chains. They're also built to fit under stock short water pumps in most cases (some will require only minor water pump modifications). Milodon timing covers will not work with 4-gear style gear drives or belt drives.
( 29 )
$122.95
—
$199.95
Milodon premium roller timing chains are equal to and, in most aspects, exceed OEM-quality specifications. They feature a double-wide non-split roller design to allow for easier chain movement, yielding increased performance and longevity. These timing chains come in application-specific designs to ensure an exceptional fit, superior strength, and quality performance for your ride.
( 8 )
$85.95
—
$122.95
Milodon marine oil pans are designed to provide optimum performance for all applications. They're available for flywheel aft and forward installations, are fully baffled, trap-doored, and include windage trays. They are made from extra-heavy gauge steel to withstand extreme use and carry large oil capacities for high-rpm prop boats or high-load, heat-creating jet drive boats .
( 6 )
$569.95
—
$689.95
Ideal for street and strip applications, Milodon windage trays are specially contoured for a good fit. They permit rapid oil return and protection from oil splash-back, while providing increased power. They are available in either a solid design with louvers or a high-tech screen design.
( 94 )
$45.95
—
$112.95
Do you have a new timing cover, or one that lacks a timing pointer? If so, then you clearly need a great looking pointer to complete the package. Milodon has the perfect accent to your timing cover. They will look great with your cover and are marked off with a wide span of degrees both before and after TDC, so you can get the precise timing setting that you need.
( 52 )
$6.95
—
$82.95
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 47 )
$18.95
—
$53.95
Milodon offers these valve cover stud kits for both universal and vehicle-specific applications. They're available in a variety of thread sizes, lengths, and quantities. The steel studs come with hex nuts for easy installation.
( 23 )
$14.95
—
$34.95
Milodon Vac-U-Pan systems are a highly effective method of achieving optimum power through significantly reducing oil pressures. The breather of the units attaches to the valve cover and the probe is inserted into the header. Exhaust scavenging pulls pressure and blowby out of the motor. These complete kits include breathers, check valves, and weld-in nipples.
( 16 )
$69.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
