Availability
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$47.99
—
$90.99
Mahle Original rear main seals are high-quality rear main seals designed to replace your factory seals. They are constructed from high-quality materials to meet or exceed OE standards and are designed to provide long-lasting durability and performance. If you're looking for high-quality replacement seals for your vehicle, Mahle Original rear main seals are your solution.
( 25 )
$31.99
Mahle sealing products are trusted by OEMs and technicians around the globe. They are the leaders in domestic, Asian, and European applications. Mahle engine conversion gasket sets offer the right sealing performance for your project. These kits are precision-cut and contain the correct selection of gaskets and seals needed. Some kits may include RTV for upper and lower pan gaskets. Need a full set? Just add one of Mahle's head sets and you will have everything you need. Features include: * Meet or exceed the original equipment specifications * Utilize OE equivalent or better materials * Packaged in a shrink-wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
( 13 )
$156.99
Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature.
( 14 )
$16.99
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 33 )
$36.99
No leaks, no problems! Mahle Original timing cover gaskets deliver a perfect fit for a wide range of auto, truck, van, and SUV applications. They're available in a variety of materials and configurations for specific vehicles. The gaskets feature an OE design that meets or exceeds factory specs—and are offered individually or in timing cover seal kits.
( 18 )
$42.99
—
$55.99
Common symptoms of poor intake manifold gasket sealing may include leaks, rough idling, and stumbling. For your next engine build, use Mahle Original intake manifold gaskets to seal your engine up tight! It's a known fact—proper sealing is vital to create maximum horsepower within the engine, and these gaskets will allow you to achieve a good, positive seal. They utilize premium materials and are precisely designed to match OE quality, fit, form, and function. Order the intake manifold gasket designed for fitment on your particular vehicle by Mahle Original, one of the most trusted names in professional sealing solutions for engines and exhaust.
( 99 )
$53.99
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 45 )
$44.99
If you have a vehicle that requires a valley pan gasket, or if your gasket kit didn't include them, then Mahle Original valley pan gaskets are just what you need. They are available for most applications.
( 1 )
$32.99
Mahle Original cam seals utilize OE-equivalent or better materials in all of their seals and gaskets. They are built to meet or exceed the original equipment specifications, providing the finest sealing products available.
( 9 )
$27.99
Mahle Original exhaust pipe flange gaskets provide OE sealing solutions for your vehicle. Their gaskets are manufactured from the best materials in various styles and configurations to deliver world-class sealing trusted by technicians around the globe. They are also offer wide-spread coverage to service many makes and models. Prevent exhaust gases from escaping with the leak-free performance of Mahle Original exhaust pipe flange gaskets.
( 11 )
$7.99
—
$8.99
Mahle Original RTV aluminum silicone sealant creates an adhesive barrier blocking the penetration of liquids and other contaminants. Designed specifically for use on engines, it resists high temperatures and has a low volatility. The sealant can be used as a supplement to traditional gaskets or in place of most paper-type gaskets—and was developed specifically for use on engines. Dana delivers innovative sealing technologies of the highest quality under the brand name Mahle Original.
( 2 )
$68.99
Mahle Original valve stem seals control the lubrication of the valve stem as it slides into the valve guide. Too little oil contributes to stem and guide wear. Too much oil increases oil consumption and can cause a buildup of carbon, leading to valve seat damage and early valve failure, as well as reduced engine performance and emission failures. Mahle Original valve stem seals ensure dependable performance and superior service life.
( 15 )
$13.99
—
$15.99
Mahle valve cover grommets are molded for leak-free performance. Often ignored, but much needed, these rubber seals assist in keeping oil inside of the cover, where it belongs. Sometimes, the smallest leaks could be a problem. Circle your valve cover bolts with Mahle valve cover grommets.
Not Yet Reviewed
$11.99
Mahle Original oil filters reliably prevent contaminants from entering the lubrication system and maintain oil quality, as well as the performance and efficiency of your engine. They are available in several shapes and styles to meet all your needs. Order the filter designed for fitment on your vehicle.
( 7 )
$6.99
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$51.99
—
$566.99
Mahle Original aftermarket replacement pistons have great features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Some include hard anodized ring lands, and coatings on the skirts and crowns. Choose the model designed for your vehicle and engine application.
( 1 )
$243.99
—
$318.99
If you're rebuilding the top-end of your engine, you'll want one of these Mahle Original head gasket sets. They are perfect for stock rebuilds of engines for street-driven cars and trucks. Mahle Original head gasket sets are packaged in shrink-wrapped trays, giving you the ability to view the contents prior to opening the package. You receive every part you need to complete your gasket repair in one package (unless otherwise stated). Mahle Original utilizes OE equivalent or better materials in all their head sets, providing you with Mahle's Best Solution for your sealing needs. Mahle Original head gasket sets give you original equipment form, fit, and function, so they fit just like the originals. These gasket sets are not intended for race applications.
( 29 )
$187.99
—
$241.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
