Availability
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$47.99
—
$322.99
Mahle Original rear main seals are high-quality rear main seals designed to replace your factory seals. They are constructed from high-quality materials to meet or exceed OE standards and are designed to provide long-lasting durability and performance. If you're looking for high-quality replacement seals for your vehicle, Mahle Original rear main seals are your solution.
( 26 )
$24.99
—
$37.99
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 45 )
$22.99
—
$77.99
Mahle sealing products are trusted by OEMs and technicians around the globe. They are the leaders in domestic, Asian, and European applications. Mahle engine conversion gasket sets offer the right sealing performance for your project. These kits are precision-cut and contain the correct selection of gaskets and seals needed. Some kits may include RTV for upper and lower pan gaskets. Need a full set? Just add one of Mahle's head sets and you will have everything you need. Features include: * Meet or exceed the original equipment specifications * Utilize OE equivalent or better materials * Packaged in a shrink-wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
( 13 )
$77.99
—
$190.99
Common symptoms of poor intake manifold gasket sealing may include leaks, rough idling, and stumbling. For your next engine build, use Mahle Original intake manifold gaskets to seal your engine up tight! It's a known fact—proper sealing is vital to create maximum horsepower within the engine, and these gaskets will allow you to achieve a good, positive seal. They utilize premium materials and are precisely designed to match OE quality, fit, form, and function. Order the intake manifold gasket designed for fitment on your particular vehicle by Mahle Original, one of the most trusted names in professional sealing solutions for engines and exhaust.
( 99 )
$26.99
—
$89.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 23 )
$116.99
—
$382.99
Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature.
( 14 )
$8.99
—
$36.99
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 35 )
$23.99
—
$36.99
No leaks, no problems! Mahle Original timing cover gaskets deliver a perfect fit for a wide range of auto, truck, van, and SUV applications. They're available in a variety of materials and configurations for specific vehicles. The gaskets feature an OE design that meets or exceeds factory specs—and are offered individually or in timing cover seal kits.
( 18 )
$5.99
—
$61.99
If you're rebuilding the top-end of your engine, you'll want one of these Mahle Original head gasket sets. They are perfect for stock rebuilds of engines for street-driven cars and trucks. Mahle Original head gasket sets are packaged in shrink-wrapped trays, giving you the ability to view the contents prior to opening the package. You receive every part you need to complete your gasket repair in one package (unless otherwise stated). Mahle Original utilizes OE equivalent or better materials in all their head sets, providing you with Mahle's Best Solution for your sealing needs. Mahle Original head gasket sets give you original equipment form, fit, and function, so they fit just like the originals. These gasket sets are not intended for race applications.
( 30 )
$79.99
—
$360.99
If you have a vehicle that requires a valley pan gasket, or if your gasket kit didn't include them, then Mahle Original valley pan gaskets are just what you need. They are available for most applications.
( 1 )
$32.99
Mahle Original cam seals utilize OE-equivalent or better materials in all of their seals and gaskets. They are built to meet or exceed the original equipment specifications, providing the finest sealing products available.
( 9 )
$15.99
—
$30.99
Mahle is the world's largest manufacturer of piston rings. Their tremendous research and development and extensive OE connections mean that Mahle Original standard piston ring sets have the technological edge. Things like narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings, and coated compression rings for diesels all came from OE. Mahle's entire Original line proves time and again that it should be the ring of choice under every hood - regardless of the application. Mahle Original standard piston rings offer high tensile strength, high yield strength, and excellent hardness with low ring mass. These factors lead to stress resistance, minimal groove pound-out, long service life, cylinder conformability, oil economy, and good blow-by control with low friction. Whether you're repairing a modern computer-controlled engine, or rebuilding an older engine, be sure to specify Mahle Original standard piston ring sets (formerly Perfect Circle) … trusted by professional automotive technicians for over 100 years.
( 11 )
$46.99
—
$58.99
Mahle Original valve stem seals control the lubrication of the valve stem as it slides into the valve guide. Too little oil contributes to stem and guide wear. Too much oil increases oil consumption and can cause a buildup of carbon, leading to valve seat damage and early valve failure, as well as reduced engine performance and emission failures. Mahle Original valve stem seals ensure dependable performance and superior service life.
( 15 )
$13.99
—
$26.99
Mahle Original timing chain kits are OE quality replacements in an aftermarket box. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These assemblies are available in various styles, including link belt, single roller, and double roller. Order the kit designed for fitment on your specific model or engine application.
( 2 )
$69.99
Mahle Original offers a wide selection of gaskets, along with other engine sealing components for high performance vehicles and everyday cars, trucks, and SUVs. Mahle oil filter adapter gaskets are high-quality, direct-fit OE replacements for the originals that offer a superior fit—making them your premium sealing solution. Order the application suited to fit your needs.
( 2 )
$6.99
Get new thermostat housing or coolant outlet gaskets from Mahle Original for your custom, repair, or restoration project. They're made of high-quality materials to ensure a leak-free seal and available for a variety of applications to meet your needs. Don't take chances with a second-rate component--order the Mahle Original thermostat housing and coolant outlet gaskets best suited for your ride!
( 3 )
$1.99
—
$13.99
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$28.99
—
$722.99
Mahle Original single piston and ring kits have the same great OE features to provide the perfect fit and function in your vehicle. Things like compensated ring grooves to ensure proper ring loading and oil control and expansion-controlled designs for small fitting clearances to reduce engine noise, wear, emissions, and improve oil control. They offer pistons ready for installation with mounted piston rings, with pin and clips included for the convenience of the engine builder. Whether you're repairing or restoring, you can count on the performance of Mahle Original single piston and ring kits.
Not Yet Reviewed
$461.99
—
$674.99
Whether you're doing an intake gasket change or a complete rebuild, Mahle Original intake manifold bolts will get you up and running in no time. With over 100 years of experience under their belt, Mahle's quality is sure to meet or exceed OE standards for fit and function. Mahle Original intake manifold bolts are available for a variety of applications.
( 1 )
$31.99
Mahle Original exhaust pipe flange gaskets provide OE sealing solutions for your vehicle. Their gaskets are manufactured from the best materials in various styles and configurations to deliver world-class sealing trusted by technicians around the globe. They are also offer wide-spread coverage to service many makes and models. Prevent exhaust gases from escaping with the leak-free performance of Mahle Original exhaust pipe flange gaskets.
( 12 )
$7.99
—
$10.99
Mahle Original fuel filters help remove all the contaminants and impurities that work their way into the fuel system. Whether it's from dirty, rusty storage tanks or the inevitable corrosion from an aging vehicle—Mahle Original fuel filters should be part of your regularly scheduled maintenance. They're available in a wide range of styles for fitment on countless vehicles from 1950 and up. Order the model recommended for your automotive or powersports application.
( 6 )
$12.99
Mahle valve cover grommets are molded for leak-free performance. Often ignored, but much needed, these rubber seals assist in keeping oil inside of the cover, where it belongs. Sometimes, the smallest leaks could be a problem. Circle your valve cover bolts with Mahle valve cover grommets.
Not Yet Reviewed
$11.99
Mahle Original timing cover seals meet or exceed the original equipment specifications providing the finest sealing products available. They come in a variety of materials to cover many different applications. Mahle Original provides world class sealing products trusted by OEMs and Technicians around the globe and are the leader in Domestic, Asian, and European applications.
( 3 )
$7.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
