Availability
Which is more important: great performance or great sound? MagnaFlow Exhaust settles the debate by giving you both! Using decades of experience, extensive research,...
Which is more important: great performance or great sound? MagnaFlow Exhaust settles the debate by giving you both! Using decades of experience, extensive research, and field testing, MagnaFlow develops and manufactures durable steel mufflers tuned to provide the proper amount of backpressure, plus a deep, resonance-free tone. MagnaFlow Exhaust is so confident in these mufflers, each is guaranteed for life! We also carry MagnaFlow’s entire line of performance tubing, tips, hardware, catalytic converters, and complete exhaust systems.
Which is more important: great performance or great sound? MagnaFlow Exhaust settles the debate by giving you both! Using decades of experience, extensive research, and field testing, MagnaFlow develops and manufactures durable steel mufflers tuned to provide the proper amount of backpressure, plus a deep, resonance-free tone. MagnaFlow Exhaust is so confident in these mufflers, each is guaranteed for life! We also carry MagnaFlow’s entire line of performance tubing, tips, hardware, catalytic converters, and complete exhaust systems.
MagnaFlow performance mufflers are designed to provide your vehicle with more power and excellent sound. These exhaust units are available in several styles, and most feature a large-diameter, perforated stainless steel core with a straight-through design—for unrestricted flow and sound control. All contact points are lap-jointed and welded to avoid distortion or cracking at the seams. The mufflers are available in a variety of inlet/outlet diameters, inlet quantities, shapes, and finishes. Order the model that best suits your vehicle application.
( 1140 )
$93.10
—
$276.00
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 596 )
$494.00
—
$3,810.00
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 437 )
$142.75
—
$3,606.00
Manufacturer Rebate
MagnaFlow's California Universal Fit 30000 catalytic converters are the first series of a new line of converters designed for vehicles with second-generation On-Board Diagnostic (OBDII) systems. They are designed, tested, and catalogued for specific vehicles. Unlike traditional universal converters, these converters exceed strict California requirements for conversion efficiency and durability.
( 13 )
$150.78
—
$893.00
Manufacturer Rebate
MagnaFlow universal spun catalytic converters utilize the revolutionary new catalyst technology. Using new manufacturing technology, they fabricate each converter body from a single CNC-formed and laser-welded tubular section, which is then spun into a round converter body shape. The MagnaFlow universal spun catalytic converters are literally manufactured around the catalyst, which is securely tucked inside and necks down to thicker gauge material at the inlet/outlet for maximum durability. They are available in different diameter inlets and outlets to match your specific exhaust system. Whether you need centered, offset, or angled converters, MagnaFlow universal spun catalytic converters will fit any application.
( 78 )
$89.98
—
$1,300.00
Manufacturer Rebate
MagnaFlow OEM Grade Federal/EPA Compliant direct-fit catalytic converters provide your vehicle with high-emission compliance, the latest technology, and premium-grade components. Along with those benefits, you also get their industry-leading warranties, so you can drive with confidence. MagnaFlow converters are designed to the exact original equipment specifications, while being engineered to keep the "Check Engine Light" off. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Meets or exceeds EPA emissions requirements * Hassle-free, OE-like fitment tailored to your specific application * Limited 5-year/50,000 mile warranty on construction * Limited 25,000 mile warranty on emissions
( 13 )
$254.00
—
$3,093.00
Many racing venues are now requiring vehicles to be equipped with sound-dampening devices to meet strict dB level requirements. Any vehicle that cannot meet the restrictions cannot race. MagnaFlow offers these straight-through, Wide Open Performance Race Series mufflers to significantly reduce dB levels on high-performance vehicles without any loss in performance. The Race Series mufflers feature a stainless steel body, end caps and perforated core, and a stainless weld bead.
( 21 )
$177.00
—
$206.00
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 183 )
$83.00
—
$1,407.00
MagnaFlow Tru-X pipe transitions are great for single/dual, dual/dual, and balanced tube applications. These stainless steel crossover pipes represent a significant leap forward in technology over traditional H-pipes. Their gentler radius allows for better exhaust gas scavenging, noise cancellation, and balance between cylinder banks. The results are a significant increase in power and torque but a reduction in dB sound levels--the best of both worlds.
( 48 )
$130.56
—
$1,605.00
Not all exhaust clamps are alike. MagnaFlow V-band clamps feature premium stainless steel Torca construction and can be reused with leak-free results every time. Compared with conventional U-clamps and flat band clamps, these high-torque clamps offer a much tighter seal by using a reaction block that transfers bolt torque into clamp strength, and that ensures a tight seal all the way around. And, they are available in a selection of sizes. Need help hanging your exhaust? MagnaFlow V-band exhaust clamps will make installation and removal much more efficient.
( 2 )
$83.60
—
$94.00
MagnaFlow manifold exhaust Y-pipes offer more power than stock. These stainless steel Y-pipe assemblies look good and fit good, like performance exhaust should! Replace your factory setup with MagnaFlow manifold exhaust Y-pipes.
( 11 )
$267.00
—
$598.00
MagnaFlow Performance offers manifold pipes for a wide range of vehicles from the 1960s and '70s. These durable, bolt-in replacements are mandrel-bent from stainless steel in numerous sizes, styles, and configurations. Maintain your exhaust system with top-quality manifold pipes from MagnaFlow!
( 15 )
$245.00
—
$328.00
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.
( 2 )
$358.78
—
$1,710.00
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty
( 3 )
$323.53
—
$5,871.00
D-Fit muffler replacements retain your OEM piping and tailpipe, while replacing your restrictive factory muffler. With stainless steel construction, you will have the flow, performance, and lasting quality you desire.
( 17 )
$393.34
—
$473.00
MagnaFlow XL 3 chamber mufflers use a unique combination of large-diameter perforated tubing and strategically placed sound baffles to reduce unwanted resonance and help your engine create horsepower. The sound baffles tune the sound waves using calibrated tuning gate openings that allow portions of the waves to pass through. These tuned waves reflect off the back wall of the muffler and cancel out unwanted harsher sounds. The large-diameter perforated core eliminates the flow restrictions of a louvered-style core. A careful balance between perforation size/spacing and the baffle tuning gate makes for great 3-chamber performance mufflers.
( 119 )
$127.30
—
$145.00
Manufacturer Rebate
MagnaFlow diesel converters are specially formulated to control diesel exhaust. They are constructed with a ribbed body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases and holds the ceramic catalyst in proper alignment. They are seam-welded close to the converter body for a strong, tight bond, and they use a monolithic honeycomb catalyst. They are designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specs and eliminate flow restrictions.
( 3 )
$211.00
—
$1,279.00
MagnaFlow PRO Series DPF diesel exhaust systems feature a muffler-less design with mirror-finish polished, welded intercooled tips. These kits feature mandrel-bent stainless steel tubing in a variety of intermediate and tailpipe diameters. The systems are available in numerous styles, including cat-back, downpipe-back, and turbo-back. MagnaFlow Stainless Steel PRO Series DPF stainless steel exhausts are designed for a wide range of make and model diesel applications to significantly enhance both horsepower and torque.
( 1 )
$515.00
—
$839.00
MagnaFlow exhaust hangers are 100 percent stainless steel. These universal hangers offer a flared end, ensuring a secure fit to stay put and perform as expected. Perfect for your customized applications, MagnaFlow exhaust hangers are available in two variations--straight and 90 degree bends--to meet your application needs. Install your exhaust with rust-resistant stainless steel MagnaFlow hangers.
( 3 )
$153.90
—
$168.00
Magnaflow Overland Series performance exhaust systems provide the performance and versatility your off-road adventures demand. Explore further with a high clearance design that improves ground clearance, combined with robust stainless steel construction to withstand the toughest terrain. All Overland Series products have been specifically tuned to be comfortable for long drives—while still bringing out the unique character of your rig. Order the model recommended for your application.
( 9 )
$741.00
—
$3,707.00
Do you really need a muffler that makes your diesel truck louder than it already is? MagnaFlow D-Fit muffler delete kits reduce backpressure, increase power, and let you actually hear the radio! These thorough kits are constructed with 409 stainless steel for corrosion resistance and mandrel-bent for better flow. They include muffler replacement pieces, band clamps, and a polished stainless steel tip. Let your exhaust flow freely with MagnaFlow D-Fit muffler delete kits.
( 24 )
$201.00
—
$272.00
These MagnaFlow stainless steel exhaust tips will last five times longer than chrome tips. These super-tough tips will continue to shine for years and are available in a variety of styles, sizes, and cuts.
( 78 )
$47.00
—
$369.00
Manufacturer Rebate
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant direct-fit manifold catalytic converters. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, you can easily install these converters yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. The included gaskets and hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. These OEM Grade replacements are designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Not Yet Reviewed
$375.00
—
$2,524.00
MagnaFlow glasspack mufflers feature a free-flowing, straight-through, perforated core and non-fiberglass acoustic packing material. They deliver a smooth, deep tone to your rat rod, street/strip machine, or classic musclecar. These exhausts are built from 100 percent aluminized steel with precision robotic CNC welding. Order the model with the inlet/outlet diameters and overall length needed for your application.
( 60 )
$45.00
—
$63.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
