Availability
Low Range Off-Road steering knuckle rebuild kits contain the replacement parts needed to successfully service steering knuckles. Available for a variety of makes, models, and axles, LROR has chosen the best quality components and does not sacrifice quality for price. While competitors' kits may include only the bare essentials, Low Range Off-Road includes the parts often missing from other kits. Their Ultimate knuckle rebuild kits include upgraded seals, high-quality Koyo bearings, and more. LROR even includes the specialty tools needed to complete the job. Simply put, they are the best, most complete knuckle rebuild kits available. One kit covers both sides of the axle and most kits are available with or without wheel bearings. Low Range Off-Road knuckle rebuild kits typically include (varies by application): * Gaskets * Inner axle seals * Bearing seals * Knuckle seals * Hub seals * Trunnion (kingpin) bearings * Backing plates or backing plate eliminators * Spindle bushings * Spindle nuts and washers * Trunnion shims * Steel outer felt covers—not found in most other kits * Hub dial O-rings Notes: * Since they're not included in all kits, wheel bearings and spindle bushings should be checked when rebuilding the axle. * Some kits may contain Timken or Schaeffler/FAG bearings when Koyo bearings are not available. * Hub gaskets are sold separately for some applications.
Not Yet Reviewed
$453.88
For years, the pages had continued to turn attempting to make the best transfer case cradle for the Suzuki Samurai. Low Range Off-Road set out to put an end to that story and succeeded. Addressing the weak factory brackets, their mounting points and vulnerability in high-torque situations, Low Range Off-Road End of Story (EOS) transfer case cradles mount with 17 points of contact to the transfer case and has a full circle backbone that distributes torque around the whole case. With this added strength comes a dramatically reduced risk of T-case breakage and extended gear life. Low Range also added a 4th frame mount location on the cradle arm, reducing the chances of the frame breaking at the mount points--a common occurrence with the Samurai. Additional features and contents: * Compatible with Low Range's Samurai transfer case e-brake (SB-EBK-LR) * A lower skid plate to protect the transfer case from trail abrasion * All necessary hardware included--even the necessary drill bits * CNC laser-cut, CNC press-bent, hand MIG welded * Zinc plated for corrosion resistance * Backbone * Long arm and short arm * Factory transfer case rubber mount * Full-color instructions
Not Yet Reviewed
$377.98
Low Range Off-Road decided to start from scratch when they engineered their radiators. These coolant units are built with thicker aluminum—and are fully welded from the outside, not the inside, which allows you to see the quality of those welds. The radiators include a cap and pressed-in nuts for your shroud or one of the Low Range electric fan mounts. These performance radiators are made entirely from aluminum—no plastic, no brazing—and come with a lower drain petcock. Order the model recommended for your vehicle.
Not Yet Reviewed
$286.90
Low Range Off-Road ultimate Chevy spring swap kits are just the thing to help your truck, 4Runner, or Tacoma ride like a dream, on and off-road! These kits are recommended for your 63 in. Chevy spring conversion, but can be adapted to other like springs. The 63 in. long Chevy springs give you added flex and a softer ride—and can be very affordable! Low Range spring swap kits consist of the needed hardware for your spring conversion. Please note, however, the 63 in. leaf springs themselves are not included with this kit (recommended part number TSP-63CS-4). Low Range Off-Road Ultimate Chevy spring swap kits include: * Two sloped Chevy spring hangers * Two CNC laser-cut and CNC press-bent shackles * Two rear shackle hangers with bushings * Two 18mm bolts and crimp nuts * Four 9/16 in. bolts with washers and nuts * Four 9/16 in. U-bolts with thick washers and hi-nuts * Two heavy-duty U-bolt plates
( 1 )
$286.90
Low Range Off-Road Defiant Armor modular front bumpers are customizable, allowing you to choose the features you want to style and protect your Samurai. You choose the finish, the stinger or hoop styles, end lengths, and from a range of winch plates suitable for 0 to 3 in. body lift. The base winch mount of the bumper is made from 1/4 in. CNC laser-cut ASTM A36 steel and bent with a precision CNC press brake. The bumpers include a 2 in. receiver built into the winch mount that is compatible with many aftermarket winches. Make your choices to personalize the look and performance of your Samurai. Features: * Bare steel or durable black powdercoat finish * Stinger/hoop styles: -- Single bend -- Double bend -- Grille guard -- Grille guard with headlight guards * Side styles: -- Short ends -- Long ends -- Short ends with stubby ends * Sides come with LED light pods and new turn signals * Stubby ends increase width while keeping a low-profile * 1/4 in. thick winch mount plate with built-in 2 in. receiver * Center cap and sides made from 3/16 in. thick steel * Stingers are made from .120 in. wall x 1.75 in. O.D. DOM steel tubing * Plastic plugs to block off the unused bolt holes Note: You will need to splice the turn signals into the factory connectors.
( 1 )
$379.48
—
$538.15
Low Range Off-Road Align-Correct HD crossover steering kits will make your tires avoid slipping while following the path of a turn. The kits are offered in 3 levels: Full kit, Stage 1, and Stage 2 add-on kit. It's time to improve your steering with the strength and reliability of LROR Align-Correct HD crossover steering kits. Full kits include: * Steel steering arm * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty drag link, full 1/4 in. wall DOM tubing * Heavy-duty tie rod, full 1/4 in. wall DOM tubing * High Speed Steel (HSS) tie rod taper reamer * Class 8.8 metric bolts and washers Stage 1 kits include: * Steel steering arm * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty drag link, full 1/4 in. wall DOM tubing * High Speed Steel (HSS) tie rod taper reamer * Class 8.8 metric bolts and washers Stage 2 add-on kits include: * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty tie rod, full 1/4 in. wall DOM tubing
Not Yet Reviewed
$433.25
Low Range Off-Road budget lift kits are an affordable way to achieve the clearance you need to install larger tires on your 1999-2004 Tracker, Vitara, Grand Vitara, or XL-7. The "Basic Kits" combine Low Range Off-Road's signature red 1.5 in. coil spacers and 1.5 in. front strut spacers to give you a full 2 in. front lift. The rear gets a set of 2 in. coil spacers to get you up to 2 inches of lift. Strut tower brace spacers and hardware are included to raise that tower brace up and over your engine and to keep things lined up correctly after the lift. The "Complete Kits" include all the "Basic Kit" components with the addition of appropriate length DT3000 Series shocks to get you a great ride and plenty of flex. You can use your factory rear shocks, but they will limit your travel. Select the Low Range Off-Road budget lift kit designed for your vehicle year, make, and model. Note: While these lift kits are designed to provide significant aesthetic and performance improvements, it is important to understand their limitations compared to more expensive, comprehensive suspension lift kits.
Not Yet Reviewed
$282.56
—
$398.48
Protect exposed and easily punctured gas tanks with Low Range Off-Road Defiant Armor gas tank skid plates. Most OE skid plates are inadequate for off-road use. These skid plates are formed from thick plate steel, CNC laser cut and CNC press bent for amazing accuracy, then welded in-house by skilled craftsmen. Additional features of Low Range Off-Road Defiant Armor gas tank skid plates (may vary by application): * MIG-welded * Bolts to existing factory location for easy installation * Holes laser-notched into skid plate for drainage of snow, water, and debris * Ships raw and can be painted or powdercoated
( 10 )
$302.08
Low Range Off-Road clutch kits are available for a wide variety of years, makes, and models. LROR has done their research to find some of the best parts from several clutch manufacturers. If you're looking to replace your old worn-out stock clutch and don't need anything with more grip, LROR's Stage 1 OE-replacement clutch kits are economical and meet or exceed OEM requirements. Like almost all of their clutches, most feature DST (diaphragm spring type) pressure plates--much better than many other aftermarket clutch covers. For an upgrade, look to LROR's Stage 2 dual-surface organic and ceramic clutch kits. They easily surpass factory clutches and provide much better reliability, great engagement, and heavy-duty friction without compromising OE clutch feel. The organic material on one side reduces chatter and maintains near-stock feel. The ceramic side far surpasses woven glass or organic materials. It can handle repeated hard usage because of its impressive characteristics and much higher coefficient of friction. Low Range Off-Road Stage 3 high performance, all-ceramic clutches are their extreme-duty kits. They provide up to twice the life of factory clutches with seriously improved clamping force. Their lighter design reduces the chance of catastrophic failure due to excessive rpm and from clutch spin-down where the disc continues to spin after being disengaged. Also, ceramic clutches don't fade like conventional clutches when they get hot. You get the same solid performance hot or cold. Most Low Range Off-Road clutch kits include the following: * Clutch disc * Clutch cover/pressure plate * Pilot bearing * Release bearing * Alignment tool * Grease packet * Installation Instructions
( 1 )
$288.35
—
$433.25
Keep your Samurai protected while looking sharp with the most innovative rocker guards on the market—Low Range Off-Road's Defiant Armor rock sliders! Rocker panels are exposed and vulnerable to damage by rocks when on the trail. Often even a small amount of damage to rocker panels will keep your doors from opening and closing smoothly. These steel, black painted rock sliders are available with no step, tube step, or a formed step. Full-color instructions and all necessary hardware (along with some tools required for assembly) are included. Order the design preferred for your vehicle.
( 1 )
$474.51
With axle upgrades or rear disc brake conversions, the OE parking brake may be deleted or inoperable. Low Range Off-Road transfer case mounted E-brake/parking brake kits solve these problems by adding a mechanical disc brake on the output shaft of the transfer case. Most kits use the stock parking brake cable. They provide dramatically increased braking over the stock emergency/parking brake--with fewer parts to maintain and no low-hanging cables to be snagged by rocks. Low Range Off-Road transfer case mounted E-brake/parking brake kits take advantage of the gear ratio in the differential to multiply the force applied to hold the truck in place. They will typically hold on a 45 degree hill with the transmission in neutral. Features of Low Range Off-Road transfer case mounted E-brake/parking brake kits include: * Bolts onto the back of the transfer case with no drive shaft modifications * Can be used with drum or disc rear brakes. * Heavy-duty TIG-welded brackets * Bi-color zinc plating and durable black powdercoated finishes for corrosion resistance * All parts needed for installation included, with instructions Notes: * Drilling may be required to secure OE brake cable. * May not work with some non-LROR aftermarket transfer case crossmembers or skid plates. * Swapping to a flange with larger bolt holes may be necessary. * Installation may require removing and reinstalling the transfer case output flange. * Certain vehicles may require re-drilling the rotor. * Fuel lines closest to the rotor may need to be relocated. * If skid plate lifts the transfer case too much, trimming and boxing of floorboard may be required. * On some vehicles with an electronic speedometer pickup, an adapter is required (sold separately).
( 1 )
$433.25
There is nothing more valuable in your Suzuki Samurai vehicle than its occupants. Low Range Off-Road's Sport cage kits were designed with your own families' safety in mind. Low Range Off-Road manufactures their Sport cages in-house, from .120 in. wall DOM steel tubing, and when properly welded, the cage is very difficult to crush and will serve most off-roader's needs. The rear cage bolts into the floor of the tub, thereby utilizing a large floor plate it spreads the load across a large area, forming a strong attachment point. Cages are shipped in prebent and coped tube segments, ready to be welded together. Installing a tube cage usually precludes the use of Samurai doors, Low Range Off-Road resolved this issue by using laser-cut steel plates on the front lower portion of our cage. With their unique design elements, the front doors shut correctly and do not ruin your nice paint job or your door panels. This also makes it easier to run your door straps. In addition, integrated into the design is a speaker grille that can be removed for speaker installation—and is also made from the same 3/16 in. thick steel as the mounting brackets, therefore, it helps protect speakers from damage. Hopefully you never need it, but if you do end up on your lid, be assured that you'll more than likely come away with only minor scratches to the cage paint. Choose the Sport cage kit that is better suited to your specific application needs—or order both front and rear for a complete cage kit. Available Options: * Front Samurai Sport Cage kit: Part No. SRC-SCF * Rear Samurai Sport Cage kit: Part No. SRC-SCR * Complete front and rear set: Part No. SRC-SC—both front and rear halves of the Low Range Off-Road Sport cage tie into the factory soft top roll bar * Installation on a factory tin top is possible, but requires the addition of a soft top roll bar (sold separately) Note: Some minor grinding and trimming may be required.
Not Yet Reviewed
$520.19
Complementing your Jimny front bumper should be Low Range Off-Road's Jimny rear bumper, offering the next level in aesthetics and performance. Thoughtfully designed to absorb impact, and protect your vehicle from damage both on and off the trail, these rear bumpers are made from 3/16 in. laser-cut steel. Featuring bolt-on installation, they require no welding and include a 2 in. receiver (not rated for towing) and taillights. LROR's Jimny rear bumpers are available in bare steel or with a durable black powdercoat finish. Choose your favorite.
Not Yet Reviewed
$458.85
Low Range Off-Road complete contact axle pads provide more contact with the axle than other spring –over-axle pads to provide the strength needed for hardcore off-roading. They are laser cut from thick steel and CNC press bent for accuracy. The top of each axle pad is cut from a flat sheet, and allows a 100 percent flat surface for your spring, instead of the curved surface of some bent pads on the market. The pad surface is longer than OE pads to help with axle wrap issues that may come from narrower pads, ensuring maximum spring-to-pad surface area. Other features of Low Range Off-Road complete contact axle pads include: * 3/16 and 3/8 in. laser-cut steel construction * Fully TIG-welded for superior strength and looks * Laser-cut sides fully match the axle tube and original lower perch for complete contact * Each pad has multiple spring pin holes on the top to allow for suspension adjustments
Not Yet Reviewed
$288.35
Low Range Off-Road LRT lift kits are superior to the others. With solid CNC-machined 6061-T6 aluminum spacers pre-installed with Grade 10.9 metric studs, flanged nuts with 14mm heads like factory, these kits ensure there will be no problems down the road. Along with other quality components and unlike other kits that require you to disassemble the strut assembly for installation, LROR kits fit on top of the struts. The advantage? Less harsh ride, easier install, and aluminum will not rust like steel, while offering better performance characteristics. Strong, quality lift kits at an affordable price; Low Range Off-Road has engineered every aspect of their LRT kits to make your Toyota unbeatable. Just some of the many features of the LRT lift kits: * CNC-machined 1 in. solid aluminum blocks tapered to decrease driveline vibrations * CNC-machined differential drop to keep those CV joint boots from tearing, and the joints from premature wear from the increased angle * CNC-machined skid plate drop spacers and longer factory-style bolts * CNC-machined bump stop spacers * Front spacers are clear anodized * Full color instructions
( 1 )
$288.35
—
$453.88
Low Range Off-Road Jimny front bumpers are customizable, allowing you to choose the way you want to style and protect your Suzuki. You choose the finish and the stinger option. The protective bumpers feature a full internal reinforcement, ensuring maximum strength and rigidity for increased frontal protection, while also increasing approach angles for lifted vehicles. The base winch mount of the bumper is made from 3/16 in. CNC laser-cut ASTM A36 steel and bent with a precision CNC press brake. The bumpers include a 2 in. receiver built into the winch mount that is compatible with many aftermarket winches. Make your choices to personalize the look and performance of your Jimny. Features: * Bare steel or durable black powdercoat finish * Center cap and sides made from 3/16 in. thick steel * Available with or without stinger * Stingers are made from .120 in. wall x 1.75 in. O.D. DOM steel tubing * Compatible with aftermarket winches with: -- 4.88 in. x 3 in. or 6.60 in. x 3 in. mounting pattern * LED light pods included in the bumper Note: The receiver is not rated for towing.
Not Yet Reviewed
$401.35
—
$447.35
Low Range Off-Road ball joint spacer kits provide a cost-effective option for adding a small lift to trucks and SUVs. Benefits include the ability to mount larger, more aggressive tires for better off-road traction and appearance, a leveler or more aggressive stance for aesthetics, and a simpler installation process suitable for most DIYers. The spacers in these kits are designed to install between the ball joint and the upper control arm to effectively increase the distance, or "space," between the arm and the droop stop, thereby lifting the vehicle. Select the Low Range Off-Road ball joint spacer lift kit for your vehicle year, make, and model. Note: While these economical lift kits can be effective for daily driving and light off-roading, for advanced off-road performance it is strongly recommended to use a more comprehensive suspension system.
Not Yet Reviewed
$268.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
