Availability
Lisle ridge reamers feature rollers to assure easy turning inside the cylinder. They have an exclusive stabilizer spring which allows you to choose a selective cut to minimize chatter. The spring-loaded carbide cutter follows the contour of the cylinder--and the complete ridge is removed in just a few simple turns. The ridge reamers offset jaw guides assure rigidity throughout the entire bore range.
( 17 )
$85.99
Lisle no-slip power steering pump puller and installers are designed to remove and install pressed-on power steering pump pulleys without slippage. Their unique pulley body completely houses the pulley hub to prevent slipping on even the tightest pulleys. The tools can also be used on both traditional V-belt and serpentine belt pulley systems.
( 26 )
$55.99
Lisle Quick quad pad spreaders are an easy to spread brake pads and compress disc brake pistons for pad replacement on single, double, and quad piston calipers. They make it possible to work with the caliper on or off of your vehicle, making changing your brake pads a quick and easy job.
( 25 )
$63.99
These Lisle spark plug hole repair kits make it possible to install a new spark plug thread insert in the original thread location. Lisle Spark plug hole repair kits make it possible to complete repairs very quickly and easily. These kits feature: * One-piece drill tap * Long tap holder * Short tap holder * Insert installer * Swedger * Handle * Blow-molded case for storage
( 7 )
$92.99
Lisle timing tools help ensure camshaft alignment during removal and installation of the timing chain. Make the job quick and easy using the right tools—Lisle timing tools will do just that!
( 7 )
$50.99
—
$59.99
Lisle universal hub remover kits equip you with a time-saving tool that safely removes frozen hub assemblies without damaging other suspension components. They will fit on most 5-, 6-, and 8-lug hub assemblies found on cars and trucks. To use, simply bolt the 1/2 in. thick driving plate to the hub using the hardened washers and existing lug nuts. Insert the hardened threaded forcing screw to push against a solid surface to loosen the hub assembly. To completely remove hub the forcing screw must push from a least two different solid points. Use the tool with caution, and do not push on only one solid point.
( 3 )
$92.99
Lisle fuel injector rail fuel line cap sets are used to block off the fuel rail during fuel pressure diagnostics in a variety of Cummins, Duramax, and Ford Powerstroke engines. They help in identification of faulty diesel fuel injectors and are used to diagnose engine knock sounds. Simply install the cap on the fuel rail in the place of the injection line; when the cylinder with the failed injector is capped, the rail pressure will rise and the vehicle will start. Each set comes with five different caps.
Not Yet Reviewed
$60.99
Lisle U-joint pullers remove sealed U-joint caps without damage to driveshafts, yokes, or bearing caps quickly and easily. They are available in three sizes for small, medium, and large-duty applications. Lisle U-joint pullers feature heat-treated threads and casting for durability. Sizes and specs: * Large puller works on Class 7 and 8 trucks with 1.5 in. to 2.2 in. bearing caps. * Medium puller works on cars, medium-duty trucks, Ag equipment, and light industrial vehicles with 1.25 in. to 1.7 in. bearing caps * Small puller works on cars, light-duty trucks, and Ag equipment with 1 in. to 1.25 in. bearing caps
( 4 )
$53.99
Lisle valve keeper removal and installation tools quickly remove and install valve keepers on most overhead valve engines. Simply push or tap the tools with a hammer to remove the valve keepers. A magnet in the tool body captures the keepers for quick removal and valve disassembly. To install, you would load the keepers and then push or tap them in. Lisle valve keeper removal and installation tools can be used on the car or a work bench.
( 41 )
$66.99
Lisle low-profile plastic creepers feature a comfortable, body-fitting design to roll around the floor. They have urethane rollers inserted into steel bushings which are molded into the creeper body for added strength and easy roller replacement. What exactly is "low-profile?" How about an amazing 7/8 in. of floor clearance! The creeper surface is easy to clean and resistant to solvents and fuels.
( 26 )
$93.99
Lisle air conditioning/fuel line disconnect tools are designed to allow you to easily disconnect air conditioning lines and quick-connect fuel lines. Just slide the right sized tool onto the line; in seconds, it releases the spring lock or quick-connect couplings.
( 30 )
$59.99
Lisle Heater Core Backflush Tools are adjustable pressure industrial spray guns with air adapters and a stepped tip design for easy heater core flushing. Air pressure is added to the water flow, creating agitation that flushes out even the most stubborn clogs. The tip fits 1/2, 5/8, and 3/4 in. hose fittings. Water pressure can be easily controlled with one hand by squeezing the handle of the heavy-duty spray gun. The insulated handle protects your hand when using hot water to flush the cooling system. This spray gun attaches to a standard garden hose.
( 1 )
$52.99
Lisle transmission drain funnels are designed to extend the catch area for a cleaner and safer oil change. They are manufactured from flexible, heavy-duty plastic to hold up under extreme use. They also feature a fluted design that can be used for draining oil filters. Stop fluid from getting on your garage floor with one of these Lisle transmission drain funnels.
( 46 )
$62.99
These Lisle spark plug remover sets are designed to remove broken spark plugs from your 2004 and later Ford Triton 3V engine. Each set includes a porcelain pusher tool and a left-hand thread remover.
( 52 )
$76.99
These Lisle flaring tool sets feature 5 thread dies that are capable of making both single and double SAE flares. They have everything you need to flare thin wall steel, aluminum, and soft copper tubing and include a durable, oil and grease resistant tray for storage. If you're in the market for a flaring tool set then look no further than Lisle.
( 1 )
$67.99
Do you have tight confines? These Lisle harmonic damper pulley pullers make the job easier. These pullers are specifically designed to work in the tight confines of some engine bays. Their slim design and reworked geometry allow them to hold close to the pulley so that there is no need to pull the radiator or other difficult parts that might be in the way. The jaws are held in place with clevis pins and are easily removed for service, while the magnetic spacers make them ideal for certain applications that require them. Don't get caught with the wrong tool again--get one of these Lisle harmonic damper pulley pullers today.
( 3 )
$79.99
Lisle hood props work on all makes of cars and trucks. These hood props have a 3-piece, telescoping design that allows you the mechanic to hold the hood in the desired position to complete your job. These Lisle hood props telescope from 18 1/2 in. to 46 3/4 in. They can also be used from the side of the car or truck for better access to the engine compartment. Lisle hood props are available with or without the added support feature. The hood props with supports include the same classic Lisle hood prop and the added feature of the plastic support cup. Simply insert the support cup over a hood adjuster and then set the base of the prop into the cup for a slip-free and sturdy brace. With the added cup support, your prop rod height changes from 20 in. to 48 1/4 in.
( 33 )
$50.99
Lisle spill-free coolant funnel kits include a threaded cap and adapter for newer GM threaded-type radiator openings. They eliminate trapped air pockets, which usually cause erratic cooling and heating performance. The funnels control the proper amount of coolant entering the system—and enable the unattended filling of the cooling system. Lisle spill-free coolant funnels are available in different models, for universal or application-specific use. Flushing and refilling your radiator doesn't have to be a messy, time-consuming task, thanks to Lisle.
( 76 )
$52.99
Lisle Jiffy-tite disconnect tools are designed to disengage the line from Jiffy-tite connect fittings without removing the clip. The handy spring-action of these aluminum tools keeps them on the line and makes them easier to use. The teeth fit perfectly into the tight tolerances of your Jiffy-tite connectors. When rotated, they allow the line to be pulled without damage to the connector or the retaining clip, so that they can be reused. These tools are available for the most common sizes of Jiffy-tite fittings found on oil cooler lines used on transmissions, radiators, and other applications. Order the size needed for your applications, or the complete kit.
( 7 )
$81.99
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$78.99
Lisle flexible hose clamp tools feature a specially designed cable assembly with spring to help prevent cable breakage from over-tightening. These tools are very strong and will work on even the most stubborn clamps—including those found on radiator hoses, heater hoses, and fuel lines. Simply squeeze the handles to expand and hold the hose clamps in any open position. Expands hard-to-reach flat-band and Mobea-type hose clamps safely and easily.
Not Yet Reviewed
$63.99
Lisle manifold drill templates help to make a really tough job easier. Lisle offers several template kits that will allow you to remove broken exhaust manifold studs/bolts without damaging the cylinder head. The kits typically include drill plate and bits, along with other needed components that will assist in completing the job for your application.
( 14 )
$92.99
Lisle large tap sockets are ideal for use in areas where a T-handle just won't fit. These sets fit larger fractional M.C.T.I. standard taps, 5/8 in. through 3/4 in. They also fit 16mm and 18mm metric taps manufactured to M.C.T.I. standards. The sockets are available individually or in a set of 3 or 5. Socket details: Socket 9: * Fits 5/8 in. taps * Fits 16mm metric taps * 0.480 in. shank diameter * 0.360 in. square size * 1/2 in. drive Socket 10: * Fits 11/16 in. taps * Fits 18mm metric taps * 0.542 in. shank diameter * 0.406 in. square size * 1/2 in. drive Socket 11: * Fits 3/4 in. taps * 0.590 in. shank diameter * 0.442 in. square size * 1/2 in. drive Socket 12: * Fits 7/8 in. taps * Fits 22mm metric taps * 0.697 in. shank diameter * 0.523 in. square size * 1/2 in. drive Socket 13: * Fits 1 in. taps * Fits 25mm metric taps * 0.800 in. shank diameter * 0.600 in. square size * 1/2 in. drive
Not Yet Reviewed
$61.99
Lisle offers 7-piece lug nut flip socket sets for the removal of standard and damaged lug nuts found on many vehicles. Double-ended flip sockets offer two hex sizes in each socket. The 6-point deep well impact sockets are made from chrome moly steel with a black oxide finish to provide long-lasting service. Extension and carrying case are also included in this set.
Not Yet Reviewed
$79.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
