Availability
Lisle wheel stud installers are used with an impact wrench or ratchet to pull the new stud securely into place. They work on almost all automotive and light-duty truck wheel studs, both import and domestic.
( 60 )
$25.99
These Lisle stone-type glaze breakers are the perfect way to rid those cylinder walls of power-robbing imperfections. The 3 in. stones gently clean up the cylinder walls with controlled positive pressure throughout the full range. Lisle designed these glaze breakers to have an adjustable stop collar, allowing for a quick selection between ranges, while the stone arms easily compress to prevent cylinder wall scratches.
( 38 )
$31.99
Lisle injector seal installer kits are used for replacing PTFE seals on most Hitachi, Bosch, Continental, and Delphi single and double sealed fuel injectors found on many Ford, GM, and Subaru engines. These kits also work on many Ford ECO injectors with direct injectors. The pilot cone is placed onto the end of the injector, and the seal is started over the cone. The installer is used to push the seal over the remainder of the cone and into the groove on the injector tip. The sizer is then placed over the seal to compress it back to the correct OD to allow installation into the cylinder head. Lisle injector seal installer kits include eight pieces—five different seal stretchers, two resizers (one for Ford), and a seal pusher. Everything is contained within a sturdy case. Add a kit to your tool arsenal. Kit contents: * Seal pusher * Injector seal resizer for Ford .312 * Injector seal resizer .310 * Seal stretcher .160 * Seal stretcher .250 * Seal stretcher .330 * Seal stretcher .408 * Seal stretcher .430
( 1 )
$47.99
Pack your bearings the easy way with Lisle Handy Packers. These bearing packers make flushing out old grease and packing in new grease almost mess-free. The grease stays in the tool cavity and off of your hands. To pack a bearing, simply place the bearing on the piston and press down on the cap until the old grease is forced out and the new grease shows on top of the bearing.
( 67 )
$23.99
Lisle drain pans make transferring liquids an easier task with fewer mishaps. They're available in a variety of materials, styles, sizes, and colors. Most of the pans also have a spout molded in to dispose of fluids cleanly. The materials are resistant to chemicals and solvents—and are easy to clean.
( 25 )
$24.99
—
$48.99
Lisle spill-free coolant funnel kits include a threaded cap and adapter for newer GM threaded-type radiator openings. They eliminate trapped air pockets, which usually cause erratic cooling and heating performance. The funnels control the proper amount of coolant entering the system—and enable the unattended filling of the cooling system. Lisle spill-free coolant funnels are available in different models, for universal or application-specific use. Flushing and refilling your radiator doesn't have to be a messy, time-consuming task, thanks to Lisle.
( 76 )
$30.99
—
$52.99
These Lisle flywheel turners make it possible to turn the flywheel and rotate the engine. They also hold the flexplate or flywheel in place when torqueing the flywheel or harmonic balancer bolts. They are made of black finished steel and fold up for easy storage. If you've needed an easier way to torque your flywheel bolts down, then these Lisle flywheel turners are your answer.
( 44 )
$31.99
Lisle timing tools help ensure camshaft alignment during removal and installation of the timing chain. Make the job quick and easy using the right tools—Lisle timing tools will do just that!
( 7 )
$50.99
Lisle electrical disconnect pliers easily remove locking push-tab style electrical connectors found on mass airflow (MAF) sensors, fuel injectors, ignition coils, and other applications. Use the hook on the end of the pliers to pull out tab to unlock, and then use the point to engage the tab. Squeeze the tabs together and lift to separate the connector from sensor without damage. The tool design allows technicians to use the pliers with one hand, and to work on sensors in tight spots. * The tool is 8 in. long and has dual durometer grips for comfort.
( 9 )
$21.99
—
$29.99
Lisle vacuum gauge and fuel pump testers have easy-to-read gauges to ensure accurate vacuum and pressure checks. They are made out of high-quality materials to ensure long-lasting durability and performance. They feature a large 2 1/2 in. easy-to-read face and include a 3 ft. long hose for long reaching access.
( 18 )
$30.99
Lisle tap sockets are ideal for use in areas where a T-handle just won't fit. The sockets fit all number and fractional M.C.T.I. standard taps through 1/2 in. They also fit 1/8 in. NPT taps and metric taps through 12mm manufactured to M.C.T.I. standards. These sockets are available individually or as a set that contain a combination of the sockets listed below and are contained on a vinyl holder for easy storage. See Notes for which sockets are included in each set. Socket 1: * Fits #1, 2, 3, 4, 6, and 8 in. taps * Fits 1.6, 1.8, 2.2, 2.5, 3, 3.15, and 3.5mm metric taps * 0.141 in. shank diameter, 0.110 in. square size * 1/4 in. drive Socket 2: * Fits #8 in. taps * Fits 4mm metric taps * 0.168 in. shank diameter * 0.131 in. square size * 1/4 in. drive Socket 2 Plus: * Fits #8 in. taps * 0.199 in. shank diameter * 0.165 in. square size * 1/4 in. drive Socket 3: * Fits #10 in. taps * Fits 4.5 and 5mm metric taps * 0.194 in. shank diameter * 0.152 in. square size * 1/4 in. drive Socket 3 Plus: * Fits #10 and #12 taps * Fits 5mm metric taps * 0.219 in. shank diameter * 0.178 in. square size * 1/4 in. drive Socket 4: * Fits 1/4 in. taps * Fits 6 and 6.3mm metric taps * 0.255 shank diameter * 0.191 in. square size * 1/4 in. drive Socket 5: * Fits 5/16 in. and 7/16 in. taps * Fits 7 and 8mm metric taps * 0.323 in. shank diameter * 0.242 in. square size * 3/8 in. drive Socket 6 Minus: * Fits 3/8 in. taps * Fits 9-10mm metric taps * 0.275 in. shank diameter * 0.215 in. square size * 3/8 in. drive Socket 6: * Fits 3/8 in. taps * Fits 10mm metric taps * 0.381 in. shank diameter * 0.286 in. square size * 3/8 in. drive Socket 7: * Fits 1/2 in. taps * Fits 12 and 12.5mm metric taps * 0.367 in. shank diameter * 0.275 in. square size * 3/8 in. drive Socket 8: * Fits 1/8 in. NPT taps * 0.437 in. shank diameter * 0.328 in. square size * 3/8 in. drive
( 25 )
$32.99
Lisle dual piston brake caliper compressors make doing a brake job on vehicles with dual piston calipers a snap! Simply squeeze the tool handle until the plunger contacts the inboard brake pad and then continue squeezing to compress both pistons. The action works just like a caulking gun, making pad replacement a simple job.
( 22 )
$48.99
Lisle camshaft bearing tool replacement expanders assist in driving camshaft bearings smoothly. These low-cost assemblies will remove or insert camshaft bearings in nearly all engines, from compact cars to heavy trucks. The neoprene sleeves (over which the split driving plugs are mounted and expanded to size) are easy on your bearings. Extend the life of your cam bearing installer tools with replacement parts from Lisle.
( 9 )
$29.99
Lisle torque angle meters, also called "angle wrenches," are for most torque-to-yield fastener applications. They're commonly used for tightening head bolts and other bolts where a torque angle is required, are convenient to use, and easy to operate. Lisle torque angle meters have a flexible clamp that keeps the angle meter from rotating. It attaches easily to fixed objects, in any position, such as cylinder heads, intake manifolds, exhaust manifolds, or engine blocks, and is to be used with a 1/2 in. drive.
( 23 )
$38.99
Lisle Torx Plus bits are made of high-quality steel for superior durability and performance. The Torx Plus bit sets are offered in applications for servicing GM transmission bell housing bolts, Ford seat belt anchors and Ford pick-up bed bolts. The Torx Plus bit are available individually. Storage rail included.
( 7 )
$29.99
Lisle Duramax flexplate holder and socket kits are designed to lock flexplates in place when removing the harmonic balancer on 6.6L Chevrolet Duramax diesel engines with an Allison automatic transmission. They save time by locking the flexplate at the transmission instead of having to remove the starter for water pump replacement. Simply remove the metal spring-loaded inspection plate on the bottom of the transmission, and slide the tool into the opening toward the engine--with the top of the tool engaging the teeth of the flywheel. Use the included 36mm 12-point socket with 3/4 in. square drive to remove the harmonic balancer bolt and retorque upon installation.
( 24 )
$34.99
Lisle spindle snap ring pliers makes replacing snap rings much easier. They feature a rigid plier design with narrow tips and a ratcheting mechanism that holds the snap ring open for easy removal and installation.
( 2 )
$40.99
Lisle offers a full line of replacement components for their ridge reamers. From the top plate to the bottom plate and everything in between, Lisle ridge reamer components will keep your ridge reamer's big range scraper action rolling. Order the parts needed to repair or maintain your unit--without the cost of buying a new machine.
( 2 )
$20.99
—
$26.99
Lisle exhaust hanger removal pliers are designed to separate the exhaust hanger brackets from the rubber supports. They will work on all import and domestic car and truck exhaust systems which use rubber hanger supports.
( 42 )
$23.99
Lisle carbide gasket scrapers will clean up! Their precision-ground tungsten carbide tips will remove gasket residue, along with carbon build-up and rust. They are attached to steel blades that are molded into comfortable 6 in. long handles. They are available individually in two widths or together in a set. Clean your steel or aluminum heads and manifolds, your disc brake caliper slides with Lisle carbide gasket scrapers.
( 4 )
$22.99
—
$39.99
Bend all types of tubing without kinking or flattening with Lisle tube bending pliers! These pliers feature a unique head design that bends tubing without collapsing it or marking the tube surface. Their specially designed handles are more than 3 1/4 in. apart, providing proper leverage when handling even tough steel tubing. Lisle tube bending pliers are great for use on brake lines and in tight spots.
( 18 )
$30.99
—
$33.99
Round in and out--Lisle exhaust pipe end shapers will fix your bent, crushed, or flared pipes. These steel cones offer an economical way to reshape pipe. Simply, insert the point of the cones into your exhaust pipe to round them out or place the big end over the pipe to reshape flares. If you work with exhaust, Lisle exhaust pipe end shapers are are one of those little problem solvers you'll want to add to your tool arsenal.
( 8 )
$38.99
Lisle hose cutters are designed to cleanly cut heater hoses, fuel lines, and other types of flexible hose up to 1 1/4 in. Made of high-quality glass-filled nylon for superior strength, they include a reversible blade for double the life. So, if you're looking to cut through hose lines with ease, Lisle has you covered.
( 17 )
$21.99
Lisle compression testers allow you to quickly and accurately check compression on gasoline engines. They feature a durable, detachable hose and stop valve. Their gauges register 0-300 psi and 0-200 kpa and fit 14mm and 18mm thread sizes. If you're looking for a compression tester, Lisle's quality testers are second to none.
( 4 )
$34.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
