Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
ICT Billet High-Flow Intake Plenum Plates
ICT Billet high-flow intake plenum plates are cut from heavy-duty aerospace-grade billet aluminum. Most are 1/2 in. thick and are machined on the back side for increased plenum flow. Choose ICT Billet high-flow intake plenum plates for your engine upgrade.
( 3 )
$99.99
ICT Billet Fuel Injector Spacers
ICT fuel injector spacers adapt shorter LS injectors into taller LS intake manifolds and fuel rails. Manufactured from aerospace-grade billet aluminum, the spacers are available in multiple choices to add length to your fuel injectors. ICT Billet spacer sets also include O-rings. Choose the parts designed for your specific application.
( 28 )
$58.99
—
$65.99
ICT Billet Remote Mount Ignition Coil Relocation Brackets
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$61.99
—
$87.99
ICT Billet Coolant Crossover Kits
Whether you are replacing a rusted crossover pipe or doing a head swap, ICT Billet coolant crossover kits help increase the flow of coolant through the engine block, reducing engine temperature. They are made from aerospace-grade billet aluminum with a natural finish. By increasing the flow of coolant in the block, thereby reducing engine temperature, you can eliminate hot cylinders and detonation.
( 30 )
$52.99
—
$81.99
ICT Billet Ignition Coil Brackets
How important are ignition coils to the performance of your vehicle? Well, without them your spark plugs would never receive the high voltage needed to ignite the fuel. Securing them is also important—and that's the function of ICT Billet ignition coil brackets. Made from aerospace-grade aluminum, these brackets offer mounting points for a variety of coil styles. The brackets are available in different configurations and finishes; hardware is also included. Choose the brackets designed for fitment on your make/model.
( 28 )
$58.99
—
$87.99
ICT Billet Accessory Belt Tensioners
ICT Billet accessory belt tensioners are made from aerospace-grade billet aluminum. They are perfect for high-rpm applications where the automatic belt tensioner throws the serpentine belt on deceleration. ICT Billet accessory belt tensioners are available in Corvette, Camaro, and truck spacing; plus, they include a pulley and all mounting hardware.
( 16 )
$87.99
ICT Billet Water Pump Spacer Kits
ICT Billet water pump spacer kits are available in several thicknesses for LS Series engines. They can be used to install truck-style accessories (power steering, alternator, A/C compressor, etc.) while using factory LS3 or LS1 water pumps. Made from aerospace-grade billet aluminum, they feature a natural aluminum finish and include bolts, a steam port plug in one of the spacers, and reusable O-ring seals.
( 15 )
$51.99
—
$58.99
ICT Billet Heater Core Hoses
ICT Billet heater core hoses are great for doing LS/LT engine swaps when retaining the heater core. The USA-made hoses are compatible with all OEM LS and LT water pump outlet hose sizes. The package includes 60 in. hoses in 5/8 in. and 3/4 in. inside diameters.
( 4 )
$65.99
ICT Billet Intake Port Block-Off Plates
ICT Billet intake port block-off plates are designed to help you clean, paint, or store your engine without the worry of dust and debris getting into your intake ports. Built from high-quality, aerospace grade billet aluminum, these kits include the necessary O-rings or gaskets for a watertight seal.
( 8 )
$99.99
ICT Billet Flywheel Holding Tools
Torque your harmonic balancer bolt with ease using the ICT Billet flywheel holding tool. These specially made tools will hold your crankshaft in place while you properly torque down your harmonic balancer bolt. These tools are designed to work on engines mounted to an engine stand or an engine already installed in the vehicle.
( 18 )
$58.99
ICT Billet LS Lifter Valley Covers
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$89.99
ICT Billet Alternator Brackets
ICT Billet alternator brackets are made from aerospace-grade billet aluminum. They come packaged in kits that include alternator brackets, bolts, spacers, and all the necessary mounting hardware. They bolt to the face of the block and can only be used on blocks with at least two mounting holes on the front of the block.
( 291 )
$58.99
—
$99.99
ICT Billet Exhaust Port Block-Off Plates
ICT Billet exhaust port block-off plates are designed to help you clean, paint, or store your engine without the worry of dust and debris getting into your exhaust ports. Built from high-quality, aerospace grade billet aluminum, these kits include the necessary O-rings or gaskets for a tight seal.
( 7 )
$58.99
ICT Billet Throttle Cable Brackets
ICT Billet throttle cable brackets are designed to fit their 102mm intake kits. These brackets allow for standard throttle body placement, or for upside down throttle body placement to gain more hood clearance. The support brackets are 3/8 in. thick billet aluminum, while the throttle cable brackets are 1/4 in. thick billet aluminum. ICT Billet includes all necessary hardware for a no-hassle install.
( 10 )
$58.99
ICT Billet Wiring Pigtails
ICT Billet has your LS swap covered with ICT Billet wiring pigtails. Options are available for standard and extended lengths on a multitude of applications. All designed to work with OE sensors for the easiest installation possible!
( 11 )
$58.99
ICT Billet Knock Sensor Brackets
ICT Billet knock sensor brackets allow LS Gen III knock sensors to be retained and relocated from the valley pan area to the bottom edge of the engine block. Machined from aerospace-grade billet aluminum, the brackets are compatible with all Gen III harnesses and knock sensors. Mounting hardware is included.
( 3 )
$87.99
ICT Billet Mock-Up Fuel Injector Plugs
ICT Billet mock-up fuel injector plugs are available in different heights for LS1, LS2, and LS3. These "dummy" injectors are made from aerospace-grade billet aluminum, matching the similar external size and shape of OEM injector. They are used primarily for filling the extra port in your fuel rail and intake manifold when using an intake manifold with dual injectors, and only one injector is desired at that specific time. ICT Billet mock-up fuel injector plugs include eight mock injectors and O-rings for one complete 8-cylinder engine installation. Choose the proper set for your engine setup.
Not Yet Reviewed
$65.99
ICT Billet Motor Mount Adapters
ICT Billet motor mount adapters are beautiful engine swap brackets. They are manufactured from aerospace grade billet aluminum, they offer adjustable mounting positions, from stock bellhousing location to 2.25 in. forward. Each kit will include plates and bolts. Mount your swap securely with the strength and style of ICT Billet motor mount adapters.
( 94 )
$72.99
ICT Billet Idler Pulley Relocation Brackets
ICT Billet idler pulley relocation brackets move the idler pulley down to allow LS1 intake manifolds to be used with truck accessory brackets. Factory brackets will require modification for intake manifold clearance; trim as needed for your intake. Also requires ICT Billet belt #K060980 for 105-amp alternators and #K060988 for high-output alternators. They are made from aerospace-grade aluminum with a natural finish.
( 7 )
$87.99
ICT Billet Throttle Body Spacers
ICT Billet throttle body spacers are designed to give you the clearance you need when swapping throttle bodies on your LS engine. Made from billet aluminum with a natural finish, these spacers include the hardware needed for a proper installation.
( 3 )
$58.99
ICT Billet Belt Tensioner Relocation Bracket Kits
ICT Billet belt tensioner relocation bracket kits reposition your belt tensioners to maintain correct alignment to the belt. Ensure that your belt remains at a nearly constant tension for maximum accessory drive component life, while still preventing belt slip. When properly applied, these kits provide consistent tension and help dampen belt system vibrations. They are made from aerospace-grade billet aluminum and include a bracket, bolts, spacers, and, where noted, a pulley.
( 3 )
$95.99
ICT Billet Throttle Body Adapters
Get connected with ICT Billet throttle body adapters. These adapter plates are offered for several different applications and are all made from aerospace-grade billet aluminum. Adapter plates are available in a variety of straight and tapered through-hole diameters.
( 30 )
$51.99
—
$65.99
ICT Billet MAF/IAT Breakout Harnesses
Avoid conductivity issues that can cause your engine to run poorly and be difficult to diagnose. ICT Billet MAF/IAT breakout harnesses are assembled with OEM tooling and use OEM harness wire colors, as well as OEM Delphi connector, lock, seals, and terminals. ICT Billet MAF/IAT harnesses are offer in different styles for retaining MAF in factory position while breaking (relocating) IAT sensor to different location, converting small 3-wire MAF to larger 5-wire MAF/IAT sensor, or when you need more length when relocating intake/air filter to opposite side of engine from factory harness and IAT is relocated external to the MAF sensor. Choose the one that meets your "breaking" needs.
Not Yet Reviewed
$65.99
ICT Billet Engine Block Coolant Drain Plugs
Need an engine block coolant drain plug? ICT Billet threaded coolant plugs will fit your LS/LT block. If you need to drain your engine of coolant, replace old plugs with new ICT billet plugs.
( 1 )
$58.99
