Availability
Secure your battery properly using one of these ICT Billet battery trays. They are manufactured from aerospace-quality billet aluminum, include a top clamp, and are secured with the included durable Grade 8 mounting hardware. The brackets also meet all NHRA/IHRA safety requirements and are available for the most popular aftermarket high performance batteries.
( 45 )
$96.99
—
$99.99
ICT Billet universal LS spark plug wire sets are possibly the last ones you will ever need. These kits provide it all, no matter what your build is, where your coils are mounted, or what boots are required for each individual spark plug. Features include: * 5 ft. length plug wires (coil end assembled with 135 degree boot) * Spiral core wire, 350 ohm, with 8mm thick jacket * 8 plug wires, 8 each of 135 degree, 90 degree, and straight boots, and terminals
( 11 )
$139.99
ICT Billet LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Choose ICT Billet LS coil wire harness extension length and model recommended for your application.
( 2 )
$43.99
—
$144.99
Mount your mass airflow sensor with ICT Billet mounting flanges. Designed to be welded, they are radius-cut on the bottom to accept 4 in. pipe. They include mounting bolts, and of course, they are all manufactured from aerospace-grade 6061 billet aluminum.
( 6 )
$29.99
—
$289.99
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$61.99
—
$87.99
How important are ignition coils to the performance of your vehicle? Well, without them your spark plugs would never receive the high voltage needed to ignite the fuel. Securing them is also important—and that's the function of ICT Billet ignition coil brackets. Made from aerospace-grade aluminum, these brackets offer mounting points for a variety of coil styles. The brackets are available in different configurations and finishes; hardware is also included. Choose the brackets designed for fitment on your make/model.
( 27 )
$58.99
—
$87.99
Reposition and secure components with ICT Billet alternator/power steering bracket kits. They are crafted from aerospace-grade billet aluminum to provide the strength for a confident move.
( 129 )
$217.99
ICT Billet LS VVT to non-VVT camshaft sensor adapters convert your VVT harness to a non-VVT sensor. These harnesses are plug-and-play and are assembled using OEM tooling with OEM Delphi connectors and terminals. Order the model recommended for your vehicle and engine application.
( 4 )
$43.99
ICT Billet offers ECM mounting trays that are designed to provide your engine control module with secure attachment and stylish good looks. Made from aerospace-grade billet aluminum, these bolt-on ECM mounting trays allow the ECU (Engine Control Unit) to be easily removed for maintenance without having to disconnect harness or removing bracket from the vehicle.
Not Yet Reviewed
$105.99
ICT Billet throttle body extension harnesses are assembled with OEM tooling, OEM Delphi components (connector, lock, seals, and terminals), and OEM harness wire colors. Don't take a chance with cheap wire connectors; poor quality materials can have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. ICT Billet throttle body extension harnesses provide quality you can trust. Order the model recommended for your application.
( 1 )
$43.99
ICT Billet has your LS swap covered with ICT Billet wiring pigtails. Options are available for standard and extended lengths on a multitude of applications. All designed to work with OE sensors for the easiest installation possible!
( 10 )
$22.99
—
$58.99
ICT Billet knock sensor brackets allow LS Gen III knock sensors to be retained and relocated from the valley pan area to the bottom edge of the engine block. Machined from aerospace-grade billet aluminum, the brackets are compatible with all Gen III harnesses and knock sensors. Mounting hardware is included.
( 2 )
$87.99
ICT Billet MAP harness extensions are ideal for use on many Chevrolet LS-based engines from 1997 and up. They're made with OEM tooling, connectors, lock seals, and terminals—and utilize factory harness wire colors. Don't chance a poorly running engine due to cheap wire connectors; choose the quality of ICT Billet MAP harness extensions.
( 4 )
$43.99
ICT Billet camshaft position sensor adapter harnesses are used when converting from rear-block sensor to front-cover sensor. They will, for example, adapt a Gen IV LS sensor to a Gen III harness. The harnesses are made with OEM-grade TXL wire and assembled with OEM tooling and OEM Delphi (connector, lock, seals, and terminals). Order the model recommended for your application.
( 2 )
$43.99
ICT Billet sensor harness extensions make change happen. They offer a selection of pre-terminated sensor to get you plugged in properly. From engine or intake swaps, ICT Billet harnesses have you covered.
( 4 )
$32.99
—
$43.99
ICT Billet starter bolt kits are designed for GM LS Series engines. They fit all 2-bolt pattern LS starters—all factory-style models that require two long bolts or one long and one short. Order the fasteners recommended for your application.
( 9 )
$25.99
ICT Billet ECM bench reader diagnostic tuning tool harnesses provide quality connections to ensure proper engine operation and easier diagnoses. Cheaper wire connectors may offer poor quality and conductivity issues, making your job harder. Don't chance it; choose ICT ECM bench reader harnesses. Features and benefits include: * Assembled with OEM-grade TXL wire * Plug-and-play for GM (Gen 3) LS series engine computers * Allows engine computer to be flashed and tuned off the vehicle * Assembled with OEM tooling, OEM Delphi connector, lock, seals, and terminals using OEM harness wire colors * Requires 12 V power source, using power and ground wire, and tuning cable/software for OBDII port
Not Yet Reviewed
$197.99
ICT Billet MAP sensor harness adapters make change happen—easily! They offer a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly. ICT Billet wire adapter harnesses are assembled with OEM tooling, connectors, lock seals, and terminals, and utilize factory harness wire colors. They're available in WeatherPack, Bosch, Delphi/GM, and Metri-pack connector styles for use on many Chevrolet small block LS-based engine applications from 1997 and up.
( 3 )
$43.99
ICT Billet offers a variety of ignition coil bracket hardware. Unless otherwise noted, these fasteners are compatible with all GM LS Series engine valve covers between 1999-2014, as well as other Chevrolet applications. The hardened steel bolts are zinc plated for protection against rust and corrosion. Order the ignition coil bracket kit recommended for your vehicle.
( 2 )
$25.99
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$43.99
—
$58.99
ICT Billet LS idle air control valve and throttle position sensor bolt kits are application-specific for use in mounting the TPS and IAC to the throttle body on LS style engines. These replacement kits consist of two each: M4-12mm and M4-8mm bolts, and four washers to facilitate installation. They fit 1997-2014 GM LS series engines.
( 2 )
$17.99
ICT Billet LS fuel sensor wiring harnesses are assembled with OEM tooling, OEM Delphi (connector, lock, seals, and terminals), and use OEM harness wire colors. They are compatible with 2012 and newer GM LS Series engines.
Not Yet Reviewed
$22.99
ICT Billet distributor hold-down clamps are strong enough to keep your timing locked in place. These hold-down clamps are made from aerospace-grade billet aluminum for long-lasting durability, and are available for many applications.
( 10 )
$17.99
ICT Billet LS3 MAP sensor connector component kits are compatible with 2009-and newer GM LS Gen 4 Series engines - "Bosch" style sensors. They replace broken, worn-out, or missing harness connectors for the MAP sensor. Kits include connector, retainer, terminals, and seals. * Compatible with 3-wire Gen 4 LS3 "Bosch" style, bolt-down sensors * Not compatible with LS Gen 3 clip-in sensors or "Brick" style sensors
Not Yet Reviewed
$22.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
