Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
ICEngineworks 1875 Series Modeling Block Add-On Kits
ICEngineworks 1875 Series modeling block add-on kits expand your basic or Pro kits to accommodate your imagination. These block add-ons let you grow your ideas to more than you ever thought possible, and envision variations for superior exhaust headers. ICEngineworks 1875 Series modeling block add-on kits are available in many sizes and quantities, so you can upgrade your existing kit, research a new design, mix with other series kits, or simply replace worn or lost units. ICEngineworks add-on kits provide the inspiration; the creativity is up to you.
Not Yet Reviewed
$99.00
—
$99.99
ICEngineworks 1750 Series Collector Dummies
When you're using the innovative ICEngineworks system to design and fabricate exhaust headers, these 1750 Series Collector Dummies are valuable accessories to position your exhaust collector in the engine bay. Just clamp, spot weld, or bolt the Dummy in the space reserved for the exhaust collector, and then construct each "plastic pattern" 1 3/4 in. header runner with a precisely defined end point. The 1750 Series Collector Dummies are available as 3-into-1 (three 1 3/4 in. OD pipes into one collector) or 4-into-1 models, sold individually or in pairs. Together with the ICEngineworks design block, cutting, and welding tools, these groundbreaking systems allow you to build complete exhaust headers in a fraction of the time!
Not Yet Reviewed
$99.00
ICEngineworks 1875 Series Collector Dummies
When you're using the innovative ICEngineworks system to design and fabricate exhaust headers, these 1875 Series Collector Dummies are valuable accessories to position your exhaust collector in the engine bay. Just clamp, spot weld, or bolt the Dummy in the space reserved for the exhaust collector, and then construct each "plastic pattern" 1 7/8 in. header runner with a precisely defined end point. The 1875 Series Collector Dummies are available as 3-into-1 (three 1 7/8 in. OD pipes into one collector) or 4-into-1 models, sold individually or in pairs. Together with the ICEngineworks design block, cutting, and welding tools, these groundbreaking systems allow you to build complete exhaust headers in a fraction of the time!
Not Yet Reviewed
$99.00
ICEngineworks 2500 FE Series Modeling Block Add-On Kits
ICEngineworks 2500 FE Series modeling block add-on kits are modular expansion packs of physical plastic blocks designed to help fabricators prototype custom 2 1/2 in. O.D. exhaust systems, turbo downpipes, intercooler piping, or cold-air intakes. Key features and purpose: * System Expansion: These add-on packs (typically sold in quantities of 20 or 40 pieces) supplement an existing master ICEngineworks basic or pro fabrication kit. They allow you to extend your physical 3-D mock-up, add longer straight runs, or incorporate more of a specific bend radius without running out of parts * Size and Specs: The "2500" designation indicates a 2 1/2 in. O.D. sizing meant to simulate standard full-exhaust or large-diameter tubing. The blocks are molded from durable ABS plastic and are available in specific configurations—such as 1 in. or 5 in. straight sections, or 15-degree corner segments featuring various centerline radii (CLR) like 3, 3.5, 4, or 5 in. * How It Works: The interlocking blocks snap together and rotate freely, letting builders physically route piping around tight engine bays or vehicle chassis obstacles in real time. Once the mock-up layout is finalized, the physical shape acts as a direct blueprint and cut-list guide for cutting and welding real metal or aluminum tubing, drastically reducing material waste and fabrication guesswork
Not Yet Reviewed
$99.00
ICEngineworks 1875 EH Series Modeling Block Add-On Kits
ICEngineworks 1875 EH Series modeling block add-on kits are 20-piece green plastic block sets designed to expand basic or professional exhaust header modeling kits. Key details: * Purpose: Expand existing kits, test new designs, create step headers, or replace lost and worn pieces * Specifications: Made for 1 7/8 in. O.D. mandrel-bent tubing layouts * Available shapes: Offered in straight lengths (such as 1 in. or 5 in.) or specific centerline radii (CLR) like 2, 2.5, 3, 4, and 5 in. * Function: The durable ABS plastic blocks snap together easily to simulate complex primary tube routing around engine bay obstacles before cutting metal
Not Yet Reviewed
$99.00
—
$99.99
ICEngineworks 1625 Series Modeling Block Add-On Kits
For experienced engine builders and serious craftsmen who have dreamed of designing perfect fitting headers, ICEengineworks brings you their very simple but highly effective 3D modeling block systems for precision exhaust headers. Now you can expand your basic or Pro kits to accommodate your imagination with ICEngineworks 1625 Series modeling block add-on kits. These block add-ons let you grow your ideas to more than you thought possible and envision variations for superior exhaust headers. ICEngineworks 1625 Series modeling block add-on kits are available in many sizes and quantities so you can upgrade your existing kit, research a new design, mix with other series kits for planning stepped headers or simply replace worn or lost units. ICEngineworks add-on kits provide the inspiration; the creativity is up to you.
Not Yet Reviewed
$99.00
—
$99.99
ICEngineworks 1750 Series Modeling Block Add-On Kits
For experienced engine builders and serious craftsmen who have dreamed of designing perfect fitting headers, ICEengineworks brings you their very simple but highly effective 3D modeling block systems for precision exhaust headers. Now you can expand your basic or Pro kits to accommodate your imagination with ICEngineworks 1750 Series modeling block add-on kits. These block add-ons let you grow your ideas to more than you thought possible and envision variations for superior exhaust headers. ICEngineworks 1750 Series modeling block add-on kits are available in many sizes and quantities so you can upgrade your existing kit, research a new design, mix with other series kits for planning stepped headers or simply replace worn or lost units. ICEngineworks add-on kits provide the inspiration; the creativity is up to you.
Not Yet Reviewed
$99.00
—
$99.99
ICEngineworks 2000 Series Modeling Block Add-On Kits
For experienced engine builders and serious craftsmen who have dreamed of designing perfect fitting headers, ICEngineworks brings you their very simple but highly effective 3D modeling block systems for precision exhaust headers. Now you can expand your basic or Pro kits to accommodate your imagination with ICEngineworks 2000 Series modeling block add-on kits. These block add-ons let you grow your ideas to more than you thought possible and envision variations for superior exhaust headers. ICEngineworks 2000 Series modeling block add-on kits are available in many sizes and quantities so you can upgrade your existing kit, research a new design, mix with other series kits for planning stepped headers or simply replace worn or lost units. ICEngineworks add-on kits provide the inspiration; the creativity is up to you.
Not Yet Reviewed
$99.00
ICEngineworks 3000 FE Series Modeling Block Add-On Kits
ICEngineworks 3000 FE Series modeling block add-on kits are small expansion packs of 20 or 40 orange plastic blocks designed to extend an existing 3 in. outer diameter exhaust prototyping system. What they do: * These add-on blocks let you build longer or more complex prototypes. You use them when your main starter kit runs out of a specific shape or radius. They save you from buying a whole new master kit when you just need a few extra pieces. -- Snap together: They click easily to form custom curves -- Real-time planning: They help you map out tight spaces before cutting expensive metal -- Exact measurements: Each block shows precise angles and lengths to guide your final fabrication Available pieces and sizes: * Add-on packs come in sets of 20 or 40 pieces. You can choose the exact shape you need for your 3 in. O.D. project: -- Straight blocks: Available in 1 in. or 5 in. lengths -- Angle blocks: 15-degree corner blocks in four different centerline radii (CLR)—3 in., 4 in., 5 in., and 6 in. CLR
Not Yet Reviewed
$99.00
ICEngineworks 1625 Series Collector Dummies
When you're using the innovative ICEngineworks system to design and fabricate exhaust headers, these 1625 Series Collector Dummies are valuable accessories to position your exhaust collector in the engine bay. Just clamp, spot weld, or bolt the Dummy in the space reserved for the exhaust collector, and then construct each "plastic pattern" 1 5/8 in. header runner with a precisely defined end point. The 1625 Series Collector Dummies are available as 3-into-1 (three 1 5/8 in. OD pipes into one collector) or 4-into-1 models, sold individually or in pairs. Together with the ICEngineworks design block, cutting, and welding tools, these groundbreaking systems allow you to build complete exhaust headers in a fraction of the time!
Not Yet Reviewed
$99.00
ICEngineworks 1250 NP Series Modeling Block Add-On Kits
ICEngineworks 1250 NP Series modeling block add-on kits are expansion packs containing 20 or 40 individual ABS plastic interlocking blocks designed to scale and mock up 1 1/4 in. nominal pipe (NPS) turbo manifolds. What they do: * Expand capabilities: They let you add more specific angles or straight lengths to an existing ICEngineworks starter or pro kit * Simulate bends: The blocks mimic standard 1 1/4 in. nominal pipe weld elbows with short (1.25 in. CLR) or long (1.875 in. CLR) radii * Prevent waste: They help map out complex exhaust routing around tight engine bay clearances before cutting expensive metal
Not Yet Reviewed
$99.00
ICEngineworks 1625 EH Series Collector Dummies
ICEngineworks 1625 EH Series collector dummies are reusable stainless steel mock-up tools designed to help fabricators position, align, and hold 1 5/8 in. O.D. exhaust header primary tubes before welding a real collector. Key features: * No jig required: They securely hold modeled primary runner tubes in the engine bay without needing to build a custom temporary jig * Accurate alignment: They create precise, parallel end-tube spacing so you can easily trim metal sections and tack-weld runners together * Durable build: Each dummy features a 100 percent stainless steel construction and built-in mounting holes for easy bolting or clamping * Reusable: You can reuse the tools across multiple custom exhaust projects * Available configurations: -- Tube compatibility: Built specifically for 1 5/8 in. O.D. exhaust tubing (indicated by the "1625" series name) -- Layouts: Offered in 2-into-1, 3-into-1, 4-into-1, and 5-into-1 collector shapes
Not Yet Reviewed
$99.00
ICEngineworks 2000 EH Series Collector Dummies
ICEngineworks 2000 EH Series collector dummies are reusable stainless steel mock-up tools designed to hold 2 in. O.D. exhaust header primary tubes in precise alignment without needing a real collector. * Key features: -- Material: Made from 100 percent stainless steel for durability and repeated use -- Tube Size: Built specifically for 2 in. (51mm) O.D. exhaust tubing -- Configurations: Available in different layouts, such as 2-into-1, 3-into-1, and 4-into-1 designs * How they work: -- Positioning: You clamp, bolt, or spot-weld the dummy in the engine bay where the final collector will go -- Design support: They anchor plastic modeling blocks or metal runners so you can define exact end points before cutting metal -- Alignment: They ensure incoming runner tubes end in a parallel formation, making the final welding step faster and cleaner
Not Yet Reviewed
$99.00
ICEngineworks 1500 NP Series Modeling Block Add-On Kits
ICEngineworks 1500 NP Series modeling block add-on kits are modular expansion packs of 20 or 40 interlocking plastic pieces designed to extend the capabilities of an existing ICEngineworks exhaust fabrication system. Core purpose and function: * Exhaust prototyping: They allow fabricators to physically mock up complex 1 1/2 in. nominal pipe (NPS) turbo manifolds and custom headers in real time * Material savings: By snapping the ABS plastic blocks together to route around engine bay obstacles, builders can test-fit and perfect a design before cutting expensive metal U-bends or weld elbows * Precise blueprinting: Each block represents a specific arc length or angle with built-in index marks, serving as a physical blueprint to record cut lists and angles Kit variations: * Add-on sets provide extra quantities of specific components rather than a full assortment. They are tailored to the 1 1/2 in. Nominal Pipe (1.900 in. O.D.) sizing standard and are available in specific configurations: -- Straight pieces: 1/2 in. or 1 in. lengths -- Radius bends: Specific centerline radii (CLR)—such as 1 1/2 in. CLR or 2 1/4 in. CLR—in 15-degree or 30-degree increments
Not Yet Reviewed
$99.00
ICEngineworks 1750 EH Series Collector Dummies
ICEngineworks 1750 EH Series collector dummies are stainless steel mock-up tools designed to hold 1 3/4 in. O.D. exhaust primary tubes in precise formations without needing a real collector. Key features and uses: Design mock-up: They help fabricators lock in collector placement in the engine bay and set exact end points for runner tubes Alignment guide: They hold tubes securely for tack-welding and guide the trimming and alignment of metal sections before final assembly Reusable steel: Built from 100 percent stainless steel with mounting holes for easy clamping or bolting Configurations: Available in 2-into-1, 3-into-1, 4-into-1, and 5-into-1 layouts
Not Yet Reviewed
$99.00
ICEngineworks 2000 Series Collector Dummies
When you're using the innovative ICEngineworks system to design and fabricate exhaust headers, these 2000 Series Collector Dummies are valuable accessories to position your exhaust collector in the engine bay. Just clamp, spot weld, or bolt the Dummy in the space reserved for the exhaust collector, and then construct each "plastic pattern" 2 in. header runner with a precisely defined end point. The 2000 Series Collector Dummies are available as 3-into-1 (three 2 in. OD pipes into one collector) or 4-into-1 models, sold individually or in pairs. Together with the ICEngineworks design block, cutting, and welding tools, these groundbreaking systems allow you to build complete exhaust headers in a fraction of the time!
Not Yet Reviewed
$99.99
ICEngineworks HPDE Tube Cutting Spacers
ICEngineworks HPDE tube cutting spacers are designed to slide over the workbench of a standard vertical band saw to align the U or J bends and center the blade's path. They're manufactured from durable aluminum and then anodized for maximum protection. A variety of spacers are available for different tube diameter and radius measurements.
( 1 )
$90.00
—
$100.00
