Availability
Hybrid Racing K-Swap clutch release system upgrades help to eliminate grinds during hard shifts and improve the feel of gear changes. Factory clutch master cylinders in newer cars are known to be rather unreliable, and because of their poor design and quality, they can lead to premature failures of critical parts throughout the drivetrain. High rpm grinds are mostly attributed to the OE master cylinder's inability to transfer fluid effectively to the slave cylinder, thus causing grinding and rasping of the gears and synchro since the clutch disc hasn't fully disengaged. Upgrading the clutch master cylinder and clutch line to Hybrid Racing K-Swap clutch release systems changes the system to an older, more direct, and efficient system. This improvement allows the driver to feel a more consistent and direct clutch pedal which also improves shifting at high rpms. These kits are intended to replace all of the clutch release components which will give you the most direct and reliable clutch pedal feel. Features and kit contents: * Genuine Honda® parts--not reproductions * OEM Nissin EM1 clutch master cylinder * Stainless steel braided clutch line * Banjo fittings with washers * OEM NISSIN slave cylinder (non-dampened)
Not Yet Reviewed
$266.94
Hybrid Racing offers A2 K-Series Swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, they created the very first Bolt-In K-Series swap shifter. The Hybrid Racing Bolt-In K-Swap shifters allow you to retain the stock center console in your EF, EG, EK, and DC chassis and only require drilling two small holes. They work with both stock DC5 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose Hybrid shifters not only for their reliability but for ease of installation and adjustability. The front/back throw can be adjusted to three different settings (100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The left/right throw can also be adjusted to three different settings (again, 100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The shift knob can be adjusted to up to 3 in. vertically, and the aluminum offset block can be rotated 360 degrees. They accept M10 x 1.5 shift knobs.
Not Yet Reviewed
$408.49
Hybrid Racing offers Z3 K-Series swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, Hybrid created the very first bolt-in K-Series swap shifter. Nearly 10 years and thousands of shifters later, Hybrid Racing presents the latest evolution of its innovative design. The bolt-in K-Swap shifter allows you to retain the stock center console in your EF, EG, EK, and DC chassis and only requires two small holes to be drilled. It works with OEM Honda 06-11 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose K-Swap shifters not only for their reliability but for ease of install and adjustability. The front/back throw can be adjusted to two different settings (75 percent stock throw, and 40 percent stock throw). The left/right throw can also be adjusted to two different settings (again, 75 percent stock throw, and 40 percent stock throw). Shift knobs can be adjusted to up to two inches vertically, and the aluminum offset block can be rotated 360 degrees. In the box: * (1) Bolt-in shifter * (2) Small cotter pins * (1) Cable stay bracket * (1) Hardware pack * 7 flat washers, 3 small, 4 large * 7 Allen head bolts, 3 small, 4 large
Not Yet Reviewed
$408.49
Hybrid Racing offers cold air intake systems for a variety of applications, including select Honda© and Acura© models. Designing an intake system with a set of guidelines isn't hard to achieve. However, building an intake system that not only fits every engine combination while allowing that setup to produce more power is. Hybrid chose to narrow that field and focus on the best recipe for power gains. Combined with its high-flow velocity air filter, these cold air intake systems have shown gains of up to 10 percent (5-10 hp) across the powerband compared to a short ram system, while significantly reducing intake air temperatures. Don't want to relocate your battery? No problem. The Hybrid Racing RSX intake allows for the battery to stay in the OEM location. These intakes require a 70mm or larger throttle body and the RBC/RRC style intake manifolds. Fitment or compatibility with an OEM PRB intake is not guaranteed. Slight trimming of the LH inner fender lining is required, and the removal or relocation of the OEM windshield washer bottle is needed. Alterations to cars running OEM Type R brake cooling ducts may be necessary. The included radiator hose fits the K20A/A2/A3/Z1 water neck. It may not fit the K20Z3/K24 water neck. What's included? 1 – 3 in. Hybrid Racing silicone cold air intake tube 1 – Velocity stack air filter 1 – Silicone upper radiator hose (for PRB style coolant neck) 1 – Valve cover breather filter 1 – Lower filter bracket 1 – Anti-vibration clamp 1 – Stainless T-bolt clamp 2 – Silicone hoses for breather connections 2 – Machined aluminum push-in fittings 5 – Hose clamps 2 – Bolts 3 – Washers
Not Yet Reviewed
$358.14
Hybrid Racing offers short shifter assemblies for a variety of applications, including many Honda© and Acura© models from 1988 and up. These economical units feature an unparalleled level of adjustability so drivers can tweak every aspect of the shifter to suit their own preference. The shifters' frame is constructed from TIG-welded, powdercoated, 1000 Series steel. The anodized upper and lower rocker assemblies are now made of single pieces of aerospace-grade aluminum, with custom sealed ball bearings to reduce friction. The new V2 shifter, for instance, is 60 percent smoother than the original version, requiring much less physical effort to row through gears all while being significantly lighter. Shift throw adjustment is achieved using two threaded cable attachment pins, meaning fine tweaks can be made to shift throw, allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin© pivot cap for sturdy, quiet operation. New dual, zinc-plated extension springs replace the OEM-style torsion centering spring for better-centering action and a more direct feel. The front/back throw and left/right throw can be adjusted independently; and most models include shift knob height adjustment. Simple single-bolt height adjustment design (borrowed from the popular K-swap shifters) allows the knob to be adjusted higher or lower than stock (within a 1.5 in. total range) with only a 5mm Allen wrench. Now you can tweak the shifter's throw AND knob position independently until the shifter functions exactly the way you want it to. Enjoy smooth, precise, and direct shifts with a new short shifter assembly from Hybrid Racing!
Not Yet Reviewed
$306.84
—
$408.49
Hybrid Racing offers shifter cables for a variety of applications, including many Honda© and Acura© models. They're a performance upgrade replacement for OEM cables. The solid rod ends and spherical bearings give these cables a firmer, tighter feel over stock cables, resulting in fewer missed shifts and a more connected feel to the chassis. Hybrid cables deliver peace of mind and improved driving performance—even when shifting hard or during demanding racing scenarios. Other notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (OEM are plastic and known to break on the factory cables). All of the rod ends and mounting bushings are CNC-machined 6061 aluminum that have been heat-treated and hard-anodized black before being laser-etched with the Hybrid Racing logo and flair. Aside from two shifter cables, each set includes cotter pins, and other components relevant to your application. Select the kit designed for your vehicle.
Not Yet Reviewed
$378.09
Hybrid Racing offers V2 short shifter assemblies for a variety of applications, including 2002-05 Honda© Civics. The shifters' frame is constructed from TIG-welded, powdercoated, 1000 Series steel. The upper, lower, and side rocker assemblies are made from a single piece of 6061 aluminum—and feature custom sealed ball bearings to reduce friction and require less physical effort to row through gears. Shift throw adjustment is achieved using two threaded cable attachment pins, allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin© pivot cap for sturdy, quiet operation. The new V2 design uses a heavy-duty internal spring, replacing the torsion centering spring for better-centering action and a more direct feel. The lower pivot ball is now made of stainless steel which sits inside of a durable Delrin© cup. The side pivot arm now comes with a heavy-duty stainless spherical bearing for increased performance and smoothness. The front/back throw and left/right throw can be adjusted independently. At the highest setting, you can expect a 20 percent reduction in throw, and at the lowest setting up to a 50 percent reduction in throw. With their superior construction, adjustability, and unmatched testing and performance, Hybrid Racing's new V2 shifter takes the best shifter one step further!
Not Yet Reviewed
$408.49
Hybrid Racing offers V3 short shifter assemblies for a variety of applications, including many Honda© and Acura© models from 2001 and up. The performance of a shifter can mean the difference between winning a race and missing a shift—and a high-quality shifter can make your car shift like a new, high performance machine. The new V3 RSX short shifter not only sits on a stronger and lighter steel frame, but the internal spring also keeps the motion totally fluid through all gears. The 4-link design offers adjustable short and crisp shifts while keeping parts to the minimum. When it comes to adjustability, the RSX shifter truly shines. Adjustments are a breeze and can give you many different options in terms of shift feel. With just the turn of a single 5mm Allen wrench, you can adjust your shift knob to be 2 in. taller or 1 in. lower than stock. With the same Allen wrench, you can adjust the knob position, bringing it closer to or further from the steering wheel—meaning you can shift quickly and keep your hands on the wheel. Want your shifts a little shorter? These shifters can reduce throw anywhere from 10 to 50 percent (below stock throw). Gate spacing (left-right shifter motion) is also adjustable. This means that if you like short throws and wide gates, long throws, and narrow gates, or any other combination, you can custom tailor it to your preference. One glance at Hybrid Racing's RSX shifter reveals a design that cuts no corners. The base plate is made from formed and welded A6 steel that's lighter and stronger than the outgoing model. The links feature full 6061-T6 aluminum construction with stainless steel ball bearings that are designed to provide quiet operation with no need for lubrication. The shift levers are made from stainless steel to avoid unsightly corrosion. The internal spring can also be swapped out for something stiffer/lighter so you can set the level of resistance you prefer. With their superior construction, adjustability, and unmatched testing and performance, these shifters have, once again, set the standard.
Not Yet Reviewed
$408.49
Hybrid Racing offers cold air intake systems for a variety of racing and off-road applications, including select Honda© and Acura© models. Engineers spent countless hours testing and refining this design to ensure it was the absolute best intake available for the 8th Gen Civic Si platform. These intakes are designed to make big gains on any setup, from totally stock to high-lift cams and huge exhausts. Dyno graphs are provided to show the intake's effectiveness against its competitors, but for example, Hybrid saw 14 hp peak gain and 9 hp average gain against the stock air box. Against competing 3.5 in. cold air intakes, Hybrid saw typical peak and average gains of around 2-3 hp with a much smoother power band—meaning more power and better drivability. The first and perhaps most obvious feature of these intakes its full silicone construction. The 1/4 in. thick fiberglass-reinforced silicone tubing is sturdy enough to withstand engine vacuum and insulates your intake charge better than any metal or plastic intake on the market. This leads to very cold intake air temperatures, meaning a denser air charge and more overall power. Another power-adding feature is the included velocity stack. The 6 in. velocity stack is designed to lower inlet restrictions and allow more air into your engine, again leading to a denser, more powerful inlet charge. One very cool component in each kit is the injection molded air bypass manifold. These manifolds serve a number of functions. They provide attachment points for the factory MAF, as well as for the (included) silicone tubing that attaches to the factory valve cover vent and air bypass valve. They also have a built-in air bypass feature that allows air into the engine when the intake's filter becomes wet. This helps to avoid the dreaded hydro-lock that so many people normally worry about in heavy rain. Hybrid Racing tested the bypass valve by totally submerging an air filter in a bucket of water and running the motor. Even when totally submerged, the engine idled and rev'd safely without hydro-locking. Of course, it's still advised to practice caution when going through deep water in any car! The biggest gain the bypass manifolds provide is the reduction of parasitic Helmholtz resonance. The internal geometry of the air bypass manifold is designed to smooth out your power band. The end result is an intake that (on average) makes up to 14 hp over the stock air box and even 2-3 more horsepower than any other 3.5 in. intakes. Also included with each kit is a powdercoated steel battery tray that relocates the battery in front of the transmission to make room for this intake's massive piping. Hybrid also provides a silicone upper radiator hose to give better clearance than the stock radiator hose. Silicone tubing is provided to replace the OEM rubber valve cover breather and air bypass tube. This gives the engine bay a cleaner, more finished appearance. The kit includes all of the bolts, hose clamps, and hardware needed to install the intake and battery tray. Notes: * You will need a tuning software like Hondata's Flash Pro to tune the car after installation. This kit should be run using MAP tunes only and should not be used with the factory ECU calibration. Please note, this system is sold as a complete kit and is not offered in pieces. * Full silicone construction * Most powerful 8th Gen intake on the market * Built-in air bypass helps to prevent hydro-locking * Includes 3.5 in. velocity stack and filter
Not Yet Reviewed
$265.99
Hybrid Racing offers K-Swap half-size radiators for a variety of applications, including select Honda© Civics from 1992 and up. Each K-Series swap radiator was carefully designed to take into account both the chassis' dimensions and mounting points, as well as the K-Series' motor's coolant inlet and outlet. These downflow-style radiators simplify the K-Series engine swap by eliminating the need for custom mounting brackets and by providing a guaranteed fit for your specific swap. All Hybrid Racing radiators feature dual core, all-aluminum construction with high-precision TIG welds. They integrate the necessary ports for the coolant temperature sending unit and the fan switch, eliminating the need for special adapters and inserts. Order the half-size radiator recommended for your vehicle.
Not Yet Reviewed
$347.69
Hybrid Racing offers K-Swap full-size radiators for a variety of applications, including select Honda and Acura models from 1992 and up. Each K-Series swap radiator was carefully designed to take into account both the chassis' dimensions and mounting points, as well as the K-Series' motor's coolant inlet and outlet. These units simplify the K-Series engine swap by eliminating the need for custom mounting brackets and by providing a guaranteed fit for your specific swap. All Hybrid Racing radiators feature dual core, all-aluminum construction with high-precision TIG welds. These full-size models integrate the necessary ports for the coolant temperature sending unit and the fan switch, eliminating the need for special adapters and inserts. Order the radiator recommended for your vehicle.
Not Yet Reviewed
$449.34
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
