Availability
Since 1971, Hughes Performance has exceeded the toughest demands for strength and durability in transmission components. Hughes manufactures complete transmissions for...
Since 1971, Hughes Performance has exceeded the toughest demands for strength and durability in transmission components. Hughes manufactures complete transmissions for RVs, heavy duty towing, circle track racing, drag racing, and street and strip applications, all reinforced for ultimate strength and safety. Competition transmissions also feature quick-disconnect cooling lines and trans-brake valve bodies. Hughes torque converters are just as tough, plus they operate cooler and more efficiently than your stock converter. Summit Racing has all of these Hughes products available, plus parts like yokes, rebuild...
Since 1971, Hughes Performance has exceeded the toughest demands for strength and durability in transmission components. Hughes manufactures complete transmissions for RVs, heavy duty towing, circle track racing, drag racing, and street and strip applications, all reinforced for ultimate strength and safety. Competition transmissions also feature quick-disconnect cooling lines and trans-brake valve bodies. Hughes torque converters are just as tough, plus they operate cooler and more efficiently than your stock converter. Summit Racing has all of these Hughes products available, plus parts like yokes, rebuild kits, and much more. Get yours now!
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 235 )
$355.50
—
$1,329.99
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 33 )
$437.99
—
$2,316.99
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$382.99
—
$895.99
Hughes Performance Pro Series Two Stage torque converter dump valve kits are two-stage complete kits for adding a dump valve to your Powerglide transmission. They offer increased stall speed while staging against the transbrake, faster engine/converter response, and reduced loading against the engine thrust bearing. They can also be applied down-track to help manage engine load and power application to the rear wheels. Hughes Performance Pro Series Powerglide torque converter dump valve kits are also available as upgrades on their Powerglide transmissions.
( 1 )
$1,045.99
—
$1,188.99
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$493.99
—
$1,521.99
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$301.50
—
$920.99
Hughes Performance Pro Series Single Stage torque converter dump valve kits are single-stage complete kits for adding a dump valve to your Powerglide transmission. They offer increased stall speed while staging against the transbrake, faster engine/converter response, and reduced loading against the engine thrust bearing. They can also be applied down-track to help manage engine load and power application to the rear wheels. Hughes Performance Pro Series Powerglide torque converter dump valve kits are also available as upgrades on their Powerglide transmissions.
( 1 )
$653.99
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$437.99
—
$2,508.99
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$443.99
—
$1,024.99
Hughes knows that the most important factor in performance driving is how your car leaves the starting line. These Competition 40 Series converters are exclusively designed for the serious racer. The replacement of the fiber thrust washers with heavy-duty needle bearing packages enables these converters to be run on the street, but they're recommended just for strip use. They'll get you the torque you need, when you need it, to get you off the line and on your way to the winner's circle.
( 3 )
$437.99
—
$1,131.99
All Hughes Performance Pro Competition 45 Series converters have a full needle bearing replacement of fiber washers. Special silicon spot brazing on top and bottom adds strength and reliability. Hughes installs a premium-built sprag assembly and a specially machined stator in these converters, giving you the performance edge you need off the line.
( 3 )
$437.99
—
$1,341.99
Unleash the power of your diesel engine! Hughes Performance extreme towing diesel torque converters are designed to handle the big power and torque that your engine puts out. They feature extra brazing for increased strength, heavy-duty bearings for greater torque capacity, a triple disk lockup clutch for greater towing capacity, stator modifications for increased torque multiplication, and a billet cover to eliminate converter bow distortion.
( 6 )
$563.99
—
$2,116.99
Have a clutch repair to do? Use Hughes Performance torque converter bolts! They provide the advantage of high quality and convenience. These bolts feature steel construction and the bolt threads are coated with a special thread-locking compound to maintain proper bolt torque.
( 4 )
$16.99
—
$23.99
Hughes Performance billet torque converters are performance oriented with high-strength construction and a higher-than-stock stall speed rating, delivering a balance of daily driving and racing performance. These billet units can withstand higher horsepower and torque application more so than stock cast versions. Select the Hughes torque converter needed for your vehicle.
Not Yet Reviewed
$538.99
—
$690.99
Hughes Pro-V series race converters are available from an entirely new casing and are built differently than Hughes' other full race torque converters. These units are the most aggressive race converters, delivering a hard hit off the line and a soft transition down track, with no loss in top-end efficiency and mph. They run faster than any other 9 in. converter Hughes has ever produced, and yet give consistency at 60 ft. that you won't believe, and still let you kill the tree. They also provide great reaction times, more aggressive stator, and a less aggressive fin angle.
Not Yet Reviewed
$1,137.99
—
$1,856.99
Hughes Performance Circle Track torque converters are specifically designed for oval track racing. They feature a full bearing for greater durability and less drag, and low stall for maximum torque multiplication and top-end efficiency, as well as quicker exits while cornering. The converters also have silicon spot-brazed turbine and pump vanes.
Not Yet Reviewed
$388.99
—
$489.99
Hughes Performance Pro III Series torque converters are available in several configurations and are among the best-known full competition units. Literally thousands of these units have been produced, and when repeatability is important, these are the converters most people insist on. The prime characteristic of the Pro III Series is the hard launch, but soft transition down track, allowing more consistency and ability to repeat. In many cases, variance of 60 ft. times will only be a few thousandths from the first to the last round.
Not Yet Reviewed
$2,837.99
Hughes Performance handcrafts their Pro II Series torque converters to suit your vehicle. Combining various fin angles, stators, turbine clearances, and sprags, Hughes assembles a winning unit every time. Get the winning edge on race day with an assist from the Pro II Series Torque Converters designed to fit your application!
Not Yet Reviewed
$735.99
Hughes Performance Pro-IV Series race converters are available from an entirely new casing and are built differently than our other full race torque converters. These units are more aggressive, delivering a hard hit off the line and soft transition down track with no loss in top-end efficiency and mph. They run faster than any other 9 in. that Hughes has ever produced, give you consistency at 60 ft. that you won't believe, and still let you kill the tree. They also offer you a great reaction time, a more aggressive stator, and a less aggressive fin angle.
Not Yet Reviewed
$1,686.99
—
$2,065.99
Hughes Performance Muscle car transmission packages are designed and built to give customers the option to choose the transmission and converter package best suited for their needs. The transmission packages come complete with everything you need—transmission, converter, transmission cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.
( 1 )
$3,750.99
—
$5,673.99
Hughes Performance Street Rod transmission packages are newly redesigned and built to give you the option to choose the transmission and converter package best suited for your needs. The transmission packages come with everything you need—transmission, torque converter, trans cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or you need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.
Not Yet Reviewed
$3,477.99
—
$3,899.99
Hughes Performance Pro Street transmission packages are newly redesigned and built to give you the option to choose the transmission and converter package best suited for your needs. The transmission packages come with everything you need—transmission, torque converter, trans cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or you need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.
Not Yet Reviewed
$4,731.99
—
$5,843.99
Hughes Performance Extreme-Duty transmission packages are designed and built to give customers the option to choose the transmission and converter package best suited to their application. The transmission packages come complete with everything you need—transmission, converter, transmission cooler, transmission fluid, and more. So, whether you're towing 20,000 lbs. or have a radical cam in your hot rod, Hughes Performance offers high-quality trans packages to match your application. Note: Contents of kits vary based on transmission type and your vehicle.
Not Yet Reviewed
$4,498.99
—
$5,140.99
Hughes Performance Heavy-Duty transmission packages provide customers with the option to pick a transmission and converter package best suited for their needs. The transmission packages come complete with everything you need—transmission, converter, transmission cooler, transmission mount, kickdown cable when required, transmission fluid, and more. So, whether you're towing 20,000 lbs. or have a radical cam in your hot rod, Hughes Performance offers high-quality trans packages to match your application. Note: Contents of kits vary based on transmission type and your vehicle.
( 1 )
$3,425.99
—
$4,417.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
