Availability
Howards Cams double roller timing sets are hand-matched for quality and reliability. These 3-piece timing sets feature a premium double roller chain for extended life with cast iron cam sprockets. The 3-keyway crank sprockets offer a +4, 0, -4 cam adjustment.
( 11 )
$42.99
—
$51.99
Designed for NASCAR, these Howards Cams Ultra Lite billet fuel pump pushrods are a necessity for any serious racer using a mechanical fuel pump. They're made from proprietary blended, carbon reinforced, bearing-grade polymer. Ultra Lite billet fuel pump pushrods weigh only 0.9 oz. (27 grams) to eliminate fuel pump cavitation. Gentle on the cam lobe, they can be used with cast or billet cams. These fuel pump pushrods are self-lubricating and super-strong.
( 8 )
$54.99
Howards Cams Performance Series C1010 pushrods are manufactured from .060 in. wall C1010 low-carbon steel material. They provide over 20 percent more column strength than OEM pushrods. Their advanced design eliminates ball breakage. They are heat-treated for use with guideplates and are designed for up to 500 lbs. of valve spring pressure.
( 59 )
$39.99
—
$53.99
Any time that you have your heads reworked, replacing the valve stem seals would be a good idea. Replace yours with Howards Cams Viton® valve seals. These valve stem seals have excellent heat and fuel resistance properties and help to keep oil out of the combustion chamber. Howards Cams Viton® valve seals offer quality with value.
( 17 )
$20.99
Howards Cams fuel pump pushrods are made from premium-grade aerospace chromoly material. They are centerless-ground after heat-treating and are hollow for light weight and fast response. Howards Cams fuel pump pushrods are rated at 170,000 psi tensile strength.
( 33 )
$26.99
—
$46.99
Howards Cams distributor gears are available in a variety of materials, styles, and diameters—machined to exacting tolerances. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps. Order the model recommended for your year/make and engine application.
( 25 )
$47.99
—
$52.99
Howards Cams machined steel valve locks are precision-machined. They feature a wider angle to better distribute valve spring loads over the retainer than typical locks.
( 2 )
$37.99
—
$52.99
Help to eliminate engine failures caused by misassembled or broken pin retainers. Now you can make sure that your rods and pistons remain connected with these high-quality steel Howards Cams Spirolox wrist pin retainers.
( 2 )
$23.99
Howards Cams spring seat and seal arbor cutters are available in a choice of sizes. You can depend on Howards Cams for the tools that you need to build your engine.
( 1 )
$35.99
These T-shirts from Howards Cams let you look great while showing off your pride in your favorite brand! These high-quality cotton shirts feature the Howards Cams logo in full color.
( 5 )
$26.99
—
$29.99
Howards Cams OE-style performance hydraulic roller lifters are stock replacements for use in factory hydraulic roller blocks. These lifters offer the best combination for the street with reduced friction and increased torque and horsepower. They're available in various outside diameters for fitment on specific vehicle applications. Order them individually or as a set.
( 4 )
$26.99
—
$39.99
Howards Cams and Racing Components offers camshaft thrust washer bearings for a variety of applications, including many Chevrolet and Ford engines from the 1950s and up. These replacements act as a bearing surface for components to rotate, transmitting and absorbing excess force to reduce friction and wear so that the components can move smoothly. They're made from factory materials and specifications to ensure proper fit and performance. Order the bearings recommended for your vehicle.
( 1 )
$21.99
—
$24.99
Howards Cams mockup rocker arms help set up your valvetrain geometry with the correct pushrod length. These easy-to-use checking tools simply slip over the rocker arm studs immediately showing how much longer or shorter your pushrods need to be. Howards Cams pushrod length checking tools are available in different stud sizes. Proper pushrod length is critical for peak performance and horsepower. Choose the proper mockup rocker arm stud size for your engine's valvetrain.
( 2 )
$24.99
The unique full body design of these Howards Cams billet aluminum rocker arms offers less flex and will withstand 800-plus lbs. of spring pressure at over .800 in. lift. These rockers are 100 percent CNC-machined and are designed for more retainer and spring clearance than most other brands. They feature needle-bearing fulcrums and roller tips, centerless ground trunnions, centerless ground pins and rollers, and thick-walled adjusting nuts.
( 44 )
$36.99
—
$44.99
Howards Cams Posi-Stop valve stem seals are offered in a couple of choices. Their Posi-Stop Viton® seals offer high-quality, high-temperature sealing that controls oil flow with no machining of guide required. Howards small O.D. valve seals are made from Fluoro elastomer high-temperature material with a rigid metal-clad chimney. Their small outside diameter provides greater spring clearance and are a must for triple springs.
Not Yet Reviewed
$26.99
Stamped from alloy steel and heat-treated for superior wear resistance, these Howards Cams heat-treated valve locks outperform OE-style keepers. They're available in a choice of sizes to suit your needs.
( 1 )
$24.99
—
$50.99
Howards Cams direct lube hydraulic flat tappet lifters use a precision minor flat ground on the side of lifter body to supply oil to the cam lobe/lifter interface. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 8 )
$20.99
Today's cams have more aggressive lobes. That's why increasing the oil supply to these lobes is critical. Howards Cams uses a precision "E.D.M." laser to burn a .021 in. hole in the center of the face of their direct lube extreme-duty mechanical lifters. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 28 )
$21.99
—
$33.99
Add some punch to your Chevy LS with these Howards Cams LS Series direct bolt-on roller rockers. These roller rockers are easy replacements for your stock LS rockers and feature plenty of advancements that help you make more power and get better throttle response. Howards designed these roller rockers to be direct bolt-on pieces, so there is no need to change pushrods, guideplates, rocker studs, or valve covers, and your engine bay can keep that sleeper, bone stock look. These rocker arms are constructed from aluminum and feature needle-bearing fulcrums and roller tips to decrease friction and increase performance. Howards Cams offers these LS Series bolt-on roller rockers in either stock ratio or a high-lift, 1.80 ratio, so you can choose which one best fits your goals.
( 3 )
$52.99
—
$54.99
Howards Cams vintage metal signs embellish any area with high performance appeal. These quality signs feature Howards' Rattler cams or their retro red, white, and blue script logo. Choose one or both to rev-up the looks of your garage, shop, or man cave.
( 2 )
$20.99
If you're running big horsepower, then you may need extra support for your front and rear main caps. Stabilize and strengthen your OEM-style main caps for big power with Howards Cams main cap support straps. These steel straps will help to counter the problems of bottom-end stress and flex management.
Not Yet Reviewed
$23.99
Do you find yourself wishing that you had three hands to adjust your valves? Howards Cams has you covered with these E-Z valve lash wrenches. These wrenches make it a breeze to adjust roller rocker arms and steel rocker arms with polylocks.
( 1 )
$43.99
For maximum low end torque without sacrificing mid or top end power Howards Cams variable duration hydraulic lifters is a great choice. These hydraulic lifters effectively lower cam duration by approximately 10 degrees, up to 3000 rpm boosting low-end torque, manifold vacuum and fuel economy while working to maintain full lift and duration at higher speeds for maximum top-end power. Howards Cams variable duration hydraulic lifters produce a mild ticking sound similar to mechanical lifters that let you know they're working to elevate your cam to its ultimate potential.
( 1 )
$36.99
Howards Cams Max Effort hydraulic lifters were specifically designed for higher revving applications. They are perfect for race applications which require a hydraulic lifter or high performance street applications that need an extra edge. These lifters can show a noticeable increase of power from 5,000 rpm and up.
( 8 )
$20.99
—
$24.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
