Availability
Howards Cams Rattler camshafts build solid power and a classic sound while retaining drivability. They feature wider lobe centers and use a more aggressive ramp rate to help with air velocity. Although their design is for high-performance street use, they also work well with a stock torque converter. Howards Cams recommends using their Rattler camshafts with a converter stalling above 1,800 rpm and a set of steeper rear-end gears.
( 25 )
$392.99
Howards Cams OE-style performance hydraulic roller lifters are stock replacements for use in factory hydraulic roller blocks. These lifters offer the best combination for the street with reduced friction and increased torque and horsepower. They're available in various outside diameters for fitment on specific vehicle applications. Order them individually or as a set.
( 5 )
$18.50
—
$379.99
Howards Cams Street series retrofit hydraulic roller lifters are designed for street performance enthusiasts who want to upgrade to a hydraulic roller camshaft. They are manufactured to fit early or late model blocks, including blocks with tall lifter bosses. Howards Cams uses cold form technology to shape their bodies for durability. The lifters are then carbonitrided and tempered for hardness. They also feature hardened and tempered steel alloy roller wheels, heat-treated stainless steel cross bars, and high-alloy steel tie bar buttons. Howards Cams Street series retrofit hydraulic roller lifters are specifically designed for street applications up to 6,500 rpm.
( 89 )
$658.99
Howards Cams LS Series mechanical roller lifters feature "Link-Bar" style lifters that are specifically designed to work with standard and high-lift mechanical roller cam Gen III applications. They also allow for the removal of the stock GM lifter tray. The LS Series mechanical roller lifters have steel alloy bodies with a special enhanced finish and heat-treated stainless steel link bars. These case-hardened 8620 rollers are fitted with the best bearings and pins and are fully rebuildable.
( 1 )
$109.99
—
$579.99
Howards Cams Big Daddy Rattler camshafts are street performance cams designed to give a nice aggressive-sounding idle without sacrificing throttle response and horsepower gains. Big Daddy camshafts are top dog in the Rattler lineup, and as such they offer a rough idle, and are best used in Pro Street or street/strip applications. Compression needs to be at least 9.5:1, the torque converter needs to stall 2,800 rpm or higher, and a performance intake manifold, steeper gears, and free-flowing exhaust are required to take advantage of the camshaft's capabilities.
Not Yet Reviewed
$429.99
Howards Cams American Muscle hydraulic roller tappet camshafts are designed as near-duplicates of the most iconic OE camshaft grinds. Howards took these fantastic grinds and made slight changes to the ramp speeds—and minor duration changes for better reliability and horsepower. They provide the same throttle response and the original-style exhaust rumble. Howards Cams manufactures American Muscle hydraulic roller tappet camshafts on dedicated, high-precision cam grinding machines to strict tolerances. Each cam is 100 percent Rockwell checked and Parkerized, ensuring the highest quality. Select the model and performance options that best suit your vehicle application.
( 15 )
$392.99
—
$429.99
Howards Cams double roller billet steel timing sets are designed for accuracy and long life. Lightweight by design, these sets feature a billet steel cam sprocket with lightening holes, a heat-treated crank sprocket, and a black oxide coating. They also include large .250 in. diameter seamless roller chains.
( 64 )
$159.99
—
$254.99
Howards Cams hydraulic roller camshafts are offered in a wide variety of profiles, from mild to wild. These units are precision-ground from race-quality cores, in-house, on dedicated cam-grinding machines. Each Howards Cams hydraulic roller camshaft is manufactured to the highest quality standards. Order the model designed for your vehicle and engine application.
( 29 )
$392.99
—
$429.99
Manufactured from tough 8740 steel, these rocker arm studs from Howards Cams feature a large ground radius fillet to provide increased support to the stud shank, effectively eliminating bending and breakage. These studs are precision-machined with rolled threads, heat-treated for a tensile strength of 180,000 psi, and then finished in black oxide. A variety of sizes and applications is available.
( 3 )
$97.99
Howards Cams Track Smart connecting rods are designed to provide the ultimate in strength and durability. They start with certified 4340 aircraft-quality steel and are fully CNC-machined on the newest generation of equipment to ensure the removal of all surface imperfections. They are fully stress-relieved and shot-peened to ensure that no stress risers remain and specially heat-treated using a multi-phase process. Howards Cams Track Smart connecting rods are bronze bushed for floating pins, while ARP cap screw fasteners secure the caps. Choose the rod sizes needed for your engine.
( 1 )
$107.99
—
$689.99
Howards Cams race series vertical bar hydraulic roller lifters offer proprietary hydraulic valving specifically designed for continuous operation to 6,600 rpm with ideal seat pressures between 150-160 lbs. The lifter bodies are fully machined from alloy steel bar stock and are completely micro-polished. The nose wheels are machined from 8620 material and the cases are hardened for durability. Howards Cams race series vertical bar hydraulic roller lifters are fully rebuildable.
( 6 )
$142.99
Howards Cams offers Big Mama Rattler camshafts for a wide range of Chevrolet and Ford applications. Rattler cams are ideal for street enthusiasts who want the classic exhaust sound—but also want true performance to go with it. These units deliver Lopey idle and throttle response you expect from a performance cam. Big Mama Rattlers provide the best of both worlds: sound and performance for street or street/strip applications. (Note: For the best exhaust note, you should use a good dual exhaust system without a crossover. A crossover will add minor performance, but mellow the exhaust tone.) Best with lower gears.
Not Yet Reviewed
$429.99
Howards Cams ProMax high rpm hydraulic roller lifters are designed to operate at rpm ranges over 7000 rpm. These fully rebuldable lifters feature internal valving for increased rpm, torque and horsepower. The lifter bodies are fully machined from alloy steel bar stock. The nose wheels are machined from 8620 material and the cases are hardened for durability.
Not Yet Reviewed
$1,194.99
These Howards Cams LS dual valve springs are specifically designed for GM Gen III LS1, LS2, and LS6 performance applications. They feature high-tech winding, heat-treating, and finishing processes to make them the ultimate late model performance springs.
( 1 )
$19.99
—
$804.99
Clearance
Howards Cams ProMax direct lube mechanical roller lifters feature "Full Time" high pressure oiling to the roller bearing shafts. This continuous oiling offers higher rpm and high spring pressure capabilities. ProMax lifters feature lightened steel alloy bodies with a special enhanced finish and heat-treated stainless steel link bars. The case-hardened 8620 rollers are fitted with the best alloy bearings and pins. These are the same materials and designs used on most Top Fuel lifters. The .300 in. taller body allows these lifters to fit early, late model, and aftermarket locks. Howards Cams ProMax direct lube mechanical roller lifters are also fully rebuildable.
( 5 )
$239.99
$145.50
—
$1,269.99
Howards Cams ProMax 2618 race pistons are low-silicon and stronger pistons that you need for racing! Forged from 2618 billet bar stock and then heat-treated and aged to a T61 condition, ProMax race pistons have less than one percent silicon content to stand up to the most extreme racing stress. Plus, Howard Cams' X-beam forging design produces a stronger piston than most standard pistons for the ultimate in performance. These 2618 race pistons also have the ability to keep their shape under extreme pressure and high rpm with no skirt shrinking! CNC-turned skirts, oversized valve pockets with radius valve reliefs, forced pin oilers, accumulator grooves, double Spirolox, and lock removal indents are standard features. Lightweight, heat-treated, aircraft-quality wrist pins are also included. Pump up the power of your race engine with the serious strength of American-made ProMax 2618 race pistons from Howards Cams.
Not Yet Reviewed
$782.99
—
$829.99
These Extreme Duty X-Beam forged billet connecting rods are designed to provide the ultimate in strength and durability. These rods start with certified 4340 aircraft-quality steel and are fully CNC-machined on the newest generation of equipment to ensure the removal of all surface imperfections. A precision EDM laser burns a hole from the top of the rod bearing journal to the wrist pin bushing for an extra supply of oil to the piston pin. They are fully stress-relieved and shot-peened to ensure that no stress risers remain. The beam is profiled for weight savings and the cap has been lightened for easier balancing. They are specially heat-treated using a multi-phase process and the rod caps are double-ribbed for added strength. Their rod cap alignment dowels to keep the bearing caps precisely aligned. Howards Cams Extreme Duty X-Beam forged connecting rods are bronze-bushed for floating pins, while 7/16 in. ARP cap screw fasteners secure the caps.
Not Yet Reviewed
$2,690.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
