Availability
Hooker exhaust manifolds offer improved flow. They feature cast iron construction with 2.5 in. diameter outlets and have been designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly at the exit port for improved flow. Hooker exhaust manifolds will provide years of leak-free performance with less underhood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. Features include: * Intended for engine swap applications where durability, quiet operation, and leak-free sealing is desired * Available in plain as-cast finish or with various Hooker ceramic coatings for reduced engine compartment temperatures and improved corrosion resistance * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included * Cast from high-silicon-moly ductile iron to provide durability and corrosion resistance * 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold *Tight tuck design provides universal fit for most popular chassis and a clean, traditional muscle car appearance
( 34 )
$308.95
—
$511.95
On Sale
Hooker Blackheart exhaust manifolds are designed to be used with Hooker Blackheart engine mounts and transmission crossmembers for a trouble-free installation. They feature nickel plated steel mating flanges and include MLS mating flange gaskets and hardware. Blackheart exhaust manifolds are cast from high-silicone moly ductile iron to provide durability and corrosion resistance.
( 19 )
$349.95
—
$511.95
Hooker Blackheart steering shafts are designed to work with the Blackheart headers, but will also work as factory replacements. Blackheart steering shafts are e-coated for maximum protection against corrosion. These shafts offer a complete bolt-on solution, with no modifications necessary.
( 66 )
$183.95
Hooker clamshell engine mounts can be used for a variety of GM vehicle applications. They feature thicker, heavy-duty steel construction covered with a durable powdercoated finish. They are designed with dowels that allow halves to be easily aligned, and there is no need to drill rivets from existing shells. Replace your engine mount housing with Hooker clamshell engine mounts.
( 24 )
$26.78
—
$51.19
Hooker Blackheart Gen III Hemi swap headers are one part of a fully engineered swap system that provides maximum component clearances, ideal drivetrain geometry and clearance for an aftermarket exhaust system. These high-quality long tube Tri-Y swap headers are made from 304 stainless steel and feature 3/8 in. thick flanges, 18-gauge with 1 7/8 in. primary tubes, and 3.00 in. collectors. These swap headers provide clearance to the brake booster, steering shaft, starter motor (both left and right side mounted starters), and provide clearance for several automatic and manual transmission options. This highly engineered swap system eliminates the installation guesswork, and compatibility uncertainty that is common with universal swap parts.
( 2 )
$385.95
Hooker introduces the RacingHeart 3-Step Dragster headers. The big block Chevy downswept headers feature 2.125 in./2.25 in./2.375 in. stepped primary tubes and 4.5 in. collectors with merge spears to maximize exhaust flow—resulting in horsepower and torque gains over a broad rpm range. RacingHearts are available in chrome plated mild steel or polished 304 stainless steel. Product details: * Collectors feature merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Features bungs for Evac systems (Evac tubes and plugs included)
( 1 )
$1,449.95
—
$1,749.95
Hooker Blackheart engine mount inserts are for use with Hooker Blackheart Clamshell engine mounts, and have been designed with durability, performance, and ease of installation in mind. They are available in both black and red, and feature factory-style indexing tabs to help with alignment during installation. The Blackheart engine mounts and inserts are sold individually. Features of Hooker Blackheart engine mount inserts include: * Heavy-duty thermoplastic polyurethane overmold for durability in high-horsepower applications * Polyurethane overmold fully encapsulates/interlocks the inner metal core to reduce the risk of part separation * Heavy-duty, zinc plated inner core for durability and corrosion resistance * Polyurethane around through-bolt provides cushion and prevents metal-to-metal contact
( 22 )
$31.45
—
$34.59
On Sale
Maximize your exhaust flow and reduce back pressure. Hooker Competition header-back exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.
( 129 )
$306.95
—
$389.95
Hooker RacingHeart Chevy swap long tube headers are race-only components. They include mandrel-bent tubing and thick flanges, plus they're offered in two materials and four different finishes. Order the model preferred for your application. Hooker RacingHeart long tube headers feature: * 2 1/8 in. mandrel-bent primary tubes and long transition 3 1/2 in. collectors with merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Available in natural or polished 304 stainless steel, as well as black painted or ceramic coated mild steel * Gaskets and hardware included * For use with AJE K-member and engine mounts
( 4 )
$778.95
—
$819.95
Hooker Blackheart A/C evaporator side covers allow the use of A/C without moving the engine forward. Created for use with LS engine swaps, their compact design is manufactured from cross-linked polyethylene, which is extremely durable and chemical-resistant to ensure long life. Hooker Blackheart side covers can also be used as replacement covers, or with other engine swaps where maximum clearance is desired.
( 20 )
$180.95
Hooker Blackheart transmission mounts are constructed of durable polyurethane to handle the stress and vibration of high-horsepower applications, while still lasting longer than rubber mounts. Their 3-hole design allows multiple mounting options for factory chassis or custom hot rod applications, and they feature a unique built-in safety lock to keep from separating under high-torque loads. Features: * Can be used in place of 1-bolt or 2-bolt mounts * Absorbs vibration and last longer than rubber * Ideal for use on street or strip applications * Molded indentions for socket clearance to ease installation * Complete with Grade 8 mounting hardware
( 6 )
$44.29
—
$48.71
At the "heart" of any performance vehicle is the exhaust system. Hooker Blackheart LS swap exhaust systems are engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality. These Blackheart LS systems are offered in three different configurations, and bolt-up directly to existing Hooker Blackheart mid-length headers (sold separately) for a hassle-free installation with an impressive sound sure to turn heads! Features and benefits include: * Constructed from lightweight, 18-gauge, mandrel-bent 409 stainless steel for maximum strength and durability * Dual 409 stainless steel high-flow, straight-through muffler design * Available in three different configurations: Dual 3 in. inlet/single 3 in. out, dual 3 in. with turndowns, or dual 3 in. inlet/dual 2.5 in. out (rear exit) * 100 percent quality hand-welded construction for strength, longevity, and good looks * Designed for use with other Blackheart S10/Sonoma LS swap products * Utilizes OEM mounting points for factory-like fitment * Tube geometry designed for maximum clearance and hassle-free installation * All hardware included
( 1 )
$716.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$352.95
$199.37
—
$428.95
Hooker Super Competition exhaust header gaskets are precision-machined to provide a sure fit and unmatched exhaust sealing. These OEM-quality gaskets feature a thick (.060 in.), synthetic, high-temperature gasket material with a perforated steel core for superior grip and adhesion. This construction also promotes a precise fit between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions. Don't take chances with your repair or restoration--order the Hooker Super Competition exhaust header gaskets designed to fit your application.
( 43 )
$26.23
—
$30.65
On Sale
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 70 )
$369.95
$90.15
—
$337.95
Blackheart intermediate pipes are strong, lightweight stainless steel, and mandrel-bent where applicable. They're available in a variety of sizes and configurations with quality welds to ensure strength, longevity, and good looks. These pipes help provide vehicles with maximum exhaust velocity, ground clearance, style, and high performance! Order the Hooker Blackheart intermediate pipes tailored for fitment on your vehicle.
( 15 )
$222.95
—
$385.95
On Sale
Hooker Street Force headers are designed to be a high performance alternative to the stock OE manifolds. They are built to accommodate all emission control devices. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Hooker Street Force headers include: * Tuned-length primary tubes for maximum exhaust scavenging and velocity * Mandrel-bent tubing for smooth exhaust flow * Lightweight and sturdy 16-gauge tubing * 3/8 in. machined flanges for a perfect seal * Industry's best welds for durability * Designed as high performance, direct fit replacements for OE exhaust manifolds * Will accommodate all emission control devices * All necessary hardware for a complete installation
( 11 )
$799.95
$532.95
Hooker Super Competition cat-back exhaust systems aid in performance gains from modifications such as cams, intakes, throttle bodies, headers, etc. They use large-diameter, mandrel-bent, 16-gauge aluminized tubing for maximum efficiency, the lowest backpressure, and longer life. These systems are designed using flanged construction (where applicable), and use existing stock hangers for easy installation.
( 41 )
$638.95
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 46 )
$1,177.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$460.95
On Sale
Get your LS engine installed properly using one of these Hooker transmission crossmember extension brackets. They are manufactured from quality materials and bolt in place for an easy installation. The brackets are available for different types of transmissions, so they're sure to have you covered.
( 4 )
$47.72
—
$276.95
Improve your exhaust flow by 23 percent with Hooker Aero Chamber mufflers. They are designed to do much more than simply muffle exhaust noise; they produce a deep throaty rumble that will not change--ever! Plus, Aero's aerodynamically designed chambers flow better to deliver more horsepower and torque thanks to their unique step principle. The stepped acceleration chamber increases exhaust gas velocity for maximum flow. An aerodynamic lens directs sound pressure into and out of the muffler while resonance chambers and sound absorption chambers create the sound. And, to keep Aero Chamber mufflers from rusting from the inside out--a stainless steel perforated plate to eliminate internal rust. Muffler cases are available in 16-gauge aluminized steel or stainless steel but it's truly what's inside that makes it so sophisticated. Need a muffler? Go with Hooker Aero Chamber mufflers--the real master of flow!
( 128 )
$241.95
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 230 )
$949.95
$632.91
Hooker torque arm brackets are CAD-designed for direct compatibility with Hooker 71222002HKR and 71222001HKR transmission crossmembers. They provide the stock location and adjustable divorced anchorage of the stock torque arm when used with either of the Hooker 4th Gen F-body crossmembers. They feature a semi-gloss black powdercoated finish and a bolt-on installation.
( 1 )
$125.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
