Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Hooker Blackheart Steering Shafts
Hooker Blackheart steering shafts are designed to work with the Blackheart headers, but will also work as factory replacements. Blackheart steering shafts are e-coated for maximum protection against corrosion. These shafts offer a complete bolt-on solution, with no modifications necessary.
( 67 )
$159.95
—
$183.95
Hooker Blackheart A/C Evaporator Side Covers
Hooker Blackheart A/C evaporator side covers allow the use of A/C without moving the engine forward. Created for use with LS engine swaps, their compact design is manufactured from cross-linked polyethylene, which is extremely durable and chemical-resistant to ensure long life. Hooker Blackheart side covers can also be used as replacement covers, or with other engine swaps where maximum clearance is desired.
( 21 )
$161.95
—
$193.95
Hooker LS Swap Exhaust System Intermediate Pipes
Hooker LS swap exhaust system intermediate pipes provide bolt-in compatibility with Hooker LS swap exhaust manifolds (2nd Gens only), headers, engine mounting brackets, and transmission crossmembers specifically designed for this vehicle application. They are manufactured from highly durable stainless steel and include the necessary mounting gaskets and hardware to complete the installation. The pipes will help to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle.
( 17 )
$104.95
—
$199.95
On Sale
Hooker Blackheart Engine Swap Motor Mount Kits
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 72 )
$369.95
$119.95
—
$243.95
Hooker Maximum Flow Mufflers
Hooker Maximum Flow mufflers allow 99 percent more exhaust flow and produce more horsepower and torque than a 2 1/2 in. open pipe. They're constructed from aluminized and stainless steel and use high-temperature packing material to absorb excessive noise, while allowing a rich, low-toned sound. As with all absorption-type silencers, the Maximum Flow mufflers will be most effective for sound control on lower-compression (8.5 to 1 and lower) motors with conservative camshafts and on applications using catalytic converters. The Maximum Flow mufflers flow either direction, allowing for easy installation.
( 40 )
$131.95
—
$150.95
On Sale
Hooker Blackheart Intermediate Pipes
Blackheart intermediate pipes are strong, lightweight stainless steel, and mandrel-bent where applicable. They're available in a variety of sizes and configurations with quality welds to ensure strength, longevity, and good looks. These pipes help provide vehicles with maximum exhaust velocity, ground clearance, style, and high performance! Order the Hooker Blackheart intermediate pipes tailored for fitment on your vehicle.
( 16 )
$255.95
$191.95
—
$222.95
Hooker Aero Chamber Mufflers
Improve your exhaust flow by 23 percent with Hooker Aero Chamber mufflers. They are designed to do much more than simply muffle exhaust noise; they produce a deep throaty rumble that will not change--ever! Plus, Aero's aerodynamically designed chambers flow better to deliver more horsepower and torque thanks to their unique step principle. The stepped acceleration chamber increases exhaust gas velocity for maximum flow. An aerodynamic lens directs sound pressure into and out of the muffler while resonance chambers and sound absorption chambers create the sound. And, to keep Aero Chamber mufflers from rusting from the inside out--a stainless steel perforated plate to eliminate internal rust. Muffler cases are available in 16-gauge aluminized steel or stainless steel but it's truly what's inside that makes it so sophisticated. Need a muffler? Go with Hooker Aero Chamber mufflers--the real master of flow!
( 130 )
$126.95
—
$241.95
On Sale
Hooker Super Competition Block Hugger Headers
Hooker Super Competition Block Hugger headers are a great choice for your custom car, truck, or rod. Ideal for applications where the frame rails are close to the engine block. These headers feature a tucked-in tube design that's perfect for those tight-fit installations! Mandrel-bent, tuned-length primaries decrease backpressure and increase exhaust velocity, improving horsepower, torque, and throttle response. Their collectors are positioned for maximum starter and engine mount clearance; and exit parallel with the oil pan rail to allow for maximum ground clearance. Hooker Super Competition Block Hugger headers come complete with the gaskets, header bolts and collector reducers needed for a successful installation.
( 27 )
$414.95
$234.47
On Sale
Hooker Blackheart Engine Mount Brackets
Hooker Blackheart engine mount brackets are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles, making your swap a good fit. The mounts are fabricated from steel to provide a strong and rigid foundation for your engine.
( 2 )
$191.95
—
$221.95
Hooker VR304 Mufflers
Slip one of these Hooker VR304 mufflers onto your exhaust system for excellent exhaust flow and a mellow, yet powerful, sound. VR304 mufflers produce an aggressive sound whenever you're on the throttle, but have a quiet note at idle--with very little resonance. Built of 304 stainless steel for maximum corrosion resistance and a great undercar appearance, their straight-through design, perforated cores, and glass fiber packing produce maximum power. Features include: * Stainless steel and high-temperature glass packing lasts longer than rockwool packing * 304 stainless steel construction for increased life and long-lasting good looks * Fully TIG-welded to add a custom-crafted appearance to any exhaust system * Efficient, compact size for improved performance and maximum ground clearance * Bi-directional for easier installation * Available in a variety of inlet/outlet sizes and configurations
( 6 )
$150.95
—
$165.95
Hooker Blackheart T-56 Shift Hump Conversion Floor Panels
Hooker Blackheart T-56 shift hump conversion floor panels are designed for swapping in a T-56 manual transmission. You can now make a clean and professional looking install with one of these tunnel/patch panels. They're made from 17-gauge steel and then EDP coated for superior corrosion resistance. The stamped steel design provides smooth edges and transitions (no seams to grind).
( 4 )
$107.95
Hooker Collector Extensions
Designed for use with 3-bolt collector rings, these 18 in. long Holley collector extensions enable the racer to adjust his torque curve to suit track conditions. These kits contain two extensions, matched gaskets, and six nuts and bolts.
( 3 )
$149.95
Hooker Blackheart Super Bee Exhaust Tips
Hooker Blackheart Super Bee exhaust tips are an easy bolt-on addition to your Hooker Blackheart Hemi Swap exhaust system. Simply remove the turndown tip extension included with the BH2361, BH2362, BH2364 or BH2365 exhaust kit and install the BHC303 or BHC304 Super Bee exhaust tip in its place. These polished stainless steel exhaust tips are a great style addition to any 1966-70 Mopar B-Body Gen III Hemi swap. Additional features: * Laser-etched Hooker logo * Mirror polished 304 stainless steel construction for corrosion resistance and long-lasting beauty * Easy 5-minute bolt-on installation (no welding required) * 1968-70 Super Bee style rectangular oval outlet * Choose from 2.5 in. or 3 in. inlet/outlet
( 1 )
$163.95
Hooker Torque Arm Brackets
Hooker torque arm brackets are CAD-designed for direct compatibility with Hooker 71222002HKR and 71222001HKR transmission crossmembers. They provide the stock location and adjustable divorced anchorage of the stock torque arm when used with either of the Hooker 4th Gen F-body crossmembers. They feature a semi-gloss black powdercoated finish and a bolt-on installation.
( 1 )
$125.95
On Sale
Hooker Reducers
Hooker reducers adapt header flanges to exhaust systems. Their size matches the diameter of the header collector and the exhaust tube size, and they can be clamped or welded.
( 120 )
$180.95
On Sale
Hooker Blackheart Transmission Crossmember Hoops
Hooker Blackheart transmission crossmember hoops are part of the most comprehensive line of Gen III Hemi swap components available for the Mopar B-body. They allow the installation of the popular NAG1 5-speed or 8HP70 8-speed automatic transmission when used with the correct adapter plate. Hooker hoops replace the very narrow factory hoops on the original upper transmission crossmember allowing clearance for driveshaft coupler and speed sensor tone rings. When used in combination with the Hooker Blackheart transmission crossmember, they provide a bolt-in clearance solution with OEM strength and durability with no need for any fabrication or welding. Features include: * 1/2 in. steel upper hoop provides the necessary structural integrity when used with Hooker Blackheart transmission crossmember * No cutting of the transmission tunnel required * Uses the OEM mounting holes * Heavy-duty steel construction for strength and durability * Includes mounting bolts
Not Yet Reviewed
$225.95
—
$232.95
$127.71
—
$178.95
On Sale
Hooker Blackheart Transmission Crossmembers
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 29 )
$352.95
$187.95
—
$224.95
On Sale
Hooker Battery Tray Relocation Kits
Every engine swap has a few minor clearance issues that must be resolved for a slick and straightforward engine installation. Thankfully, Hooker offers battery tray relocation kits that will allow you to move a battery from the driver's side to the passenger side for air intake and air filter clearance. The battery trays are laser-cut, formed from steel for a factory look, and feature a black powdercoated finish for corrosion protection. The mounting hardware is provided to offer an easy bolt-on installation. Order the model you need.
Not Yet Reviewed
$170.95
—
$177.95
$131.95
—
$133.95
On Sale
Hooker Blackheart Exhaust Manifolds
Hooker Blackheart exhaust manifolds are designed to be used with Hooker Blackheart engine mounts and transmission crossmembers for a trouble-free installation. They feature nickel plated steel mating flanges and include MLS mating flange gaskets and hardware. Blackheart exhaust manifolds are cast from high-silicone moly ductile iron to provide durability and corrosion resistance.
( 19 )
$338.95
$193.02
On Sale
Hooker Header Flanges
Your friends at Hooker have taken the most difficult and time-consuming part of building custom headers and done it for you! These pre-formed flanges feature durable 3/8 in. steel construction and will provide an exact fit to the exhaust ports on your cylinder heads.
( 3 )
$372.95
$242.95
