Holley Performance Carbs & More at Summit Racing

On Sale

Holley Power Steering Remote Reservoirs

Holley power steering remote reservoirs are ideal for applications that can not fit a pump mounted reservoir. These lightweight aluminum reservoirs have an internal baffle and air separator to keep the fluid from getting foamy or overflowing. Choose from two styles of reservoirs--polished aluminum model for custom and racing applications that you can fabricate a mount for or use clamps for mounting, or black finish model that includes mounting bracket. Features: * Aluminum construction * Dual inlet ports support Hydro-Boost brake systems when used with Earls pump adapters * Port sizes: (2) -8 ORB ports on top (inlets) and (1) -10 ORB port on the bottom (outlet) * Includes fittings: (1) -6 AN Male flare to -8 AN ORB, (1) -10 AN Male flare to -10 AN ORB, and (1) -8 AN port plug * Vented cap allows excess pressure to be released

4.0 out of 5 stars ( 5 )

$182.95

$164.65

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$1,799.95

—

$2,609.95

$1,618.95

—

$2,347.95

On Sale

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.3 out of 5 stars ( 10 )

$1,399.95

—

$2,199.95

$1,258.95

—

$1,978.95

On Sale

Holley Replacement Power Valves

Holley replacement power valves are an important component in the power enrichment circuit of Holley's performance carburetors. They operate by using engine vacuum to control their opening and closing rate. When they open, additional fuel is supplied to the main system during heavy load or under full power situations to eliminate hesitation and bogging--ensuring the smooth delivery of power without any drivability concerns. They're available in many different vacuum ranges to time the system's operation to your specific requirements, and they come in your choice of single-stage, two-stage, and high-flow designs. A gasket is included.

4.84 out of 5 stars ( 134 )

$32.58

$14.65

—

$32.58

On Sale

Holley LS Engine Power Steering Pumps

Holley has responded to the expanding LS marketplace by developing the most complete line-up of LS performance upgrades and engine swap products, including Holley LS engine power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low LS accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps will also work with Holley's special LS reservoir kit.

5.0 out of 5 stars ( 9 )

$399.95

$359.95

—

$460.95

On Sale

Holley Power Steering Pumps

Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.

1.0 out of 5 stars ( 1 )

$562.95

$505.95

On Sale

Holley Power Steering Hard Lines

Holley power steering hard lines offer a clearance solution. The pressure hose connection on the Type II power steering pump is really close to the pulley making it difficult to attach the hose. Holley power steering hard lines move the connection behind and below the pump for clearance and improved appearance. The special banjo bolt and crush washers provide additional clearance. Holley also includes a mounting bracket that makes the hardline stronger and less likely to crack from vibration or abuse. The kits are made from strong steel and zinc plated.

4.5 out of 5 stars ( 4 )

$127.95

$59.35

—

$122.95

On Sale

Holley Power Steering Pulleys

Holley power steering pulleys are designed to work with Holley aluminum power steering pump assemblies and similar pumps with a 0.66 in. shaft. These Corvette-style steel pulleys are the accessory drive add-ons you need to keep your auto running smooth.

3.54 out of 5 stars ( 13 )

$89.35

$63.44

—

$126.95

On Sale

Holley Power Valve Plugs and Gaskets

Racers sometimes prefer to race their cars without using a power valve. In these cases, the only way to properly block off the power valve circuit is with one of these Holley power valve plugs and gaskets. They'll fit any Holley carburetor with 1/2 in. x 28 threads, and block the circuit for all-out race performance!

5.0 out of 5 stars ( 6 )

$10.38

$9.34

On Sale

Holley Power Valve Check Ball Kits

Power valve blowout protection can be added to carb models 2300, 4150, and 4160 with these Holley power valve check ball kits. These kits include a spring, a brass seat and check ball, a drill bit, and a stop. They will effectively protect the power valve, and are easy to install.

4.46 out of 5 stars ( 26 )

$32.58

$29.32

On Sale

Holley LS Engine Power Steering Reservoir Kits

Holley LS engine power steering reservoir kits feature everything you need to add a power steering fluid reservoir to any of Holley's driver side LS accessory drive brackets. They include one composite, baffled OE-style reservoir tank, one cap with a level indicator, a steel mounting bracket, a power steering pump to reservoir hose, and two hose clamps.

4.85 out of 5 stars ( 20 )

$169.95

$152.95

On Sale

Holley LS Engine Alternator and Power Steering Brackets

Holley LS engine alternator and power steering brackets are designed to help you get your alternator and power steering pump mounted in the proper location. They include the necessary hardware to mount the assembly in place. An application-specific installation kit may be required, and must be purchased separately if needed.

4.69 out of 5 stars ( 13 )

$299.95

$269.95

—

$306.95

Holley Power Valve Gaskets

Holley power valve gaskets feature a full, round style. These replacement gaskets ensure a good seal for your power valve.

4.6 out of 5 stars ( 5 )

$18.66

Holley Mid LSA/LS Power Steering Brackets

If you're looking to swap an LSA or LS engine into your vehicle, but your engine didn't come with a power steering pump or the factory setup is too wide to fit properly in your bay, Holley has the answer. These new Mid LSA/LS Accessory Drive Bracket Kits offer clean, economical mounting of all LS engine accessories. The Power Steering Bracket pulls the pump in closer toward the engine when compared to the original LSA accessories, giving more clearance in swap applications. Also, Power Steering Hard Line Adapter 197-207 is not required, but makes a potentially daunting plumbing task quick and painless. There is no doubt this bracket kit looks truly at home on the LSA engine, so much so that nobody will realize it didn't come from factory this way. Product features: * Compatible with the original LSA damper/pulley and similar aftermarket versions * Compatible with Holley's Integral Reservoir and Type II Power Steering Pump (198-101) * P/S hard line adapters available (197-207) * Compatible with Holley P/N 20-160 compact SD7 A/C kit * Compatible with LSA and 2010-15 LS Camaro water pumps * Notably more clearance to swap applications than other options * OE pulley ratios for optimal accessory performance, allows for larger SC crank pulley * Original Equipment look—available in natural and black finishes

Not Yet Reviewed

$161.95

—

$185.95

On Sale

Holley Sniper 2 EFI Power Distribution Modules

Holley Sniper 2 EFI Power Distribution Modules (PDM) are cost-effective and optional accessories that isolate the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. The PDM also distributes power to your EFI fuel pump and a single fan (second fan can be ground triggered through the included input/output harness). Two additional 2-amp circuits can power low-current accessories like gauges or to trigger relays. Battery and a switched 12 V source are all that's required from your vehicle to power the PDM. Product details: * Provides conditioned Power, Ground and Switched connections for ALL components within a Sniper 2 EFI install. (Throttle Body, Fuel Pump, HyperSpark Ignition System, and Optional Fan) * 3 relay channels – 15 amp Powertrain (Sniper throttle body and ignition system) 25 amp - Fuel pump output – 25 amp fan output * LED status indicators, show you which channel is triggered at a glance * Removable cover for easy accessibility, with wiring diagram built into the lid, like a fuel panel

4.63 out of 5 stars ( 8 )

$193.95

$174.55

Holley Power Steering Pump Kits for Gen III Hemi Engines

Holley offers power steering pump kits that are ideal for Gen III Hemi engine swaps. The late-model factory power steering pump on the Mopar Gen III Hemi engines have too much pressure for the steering box on most older muscle cars and truck models. These special Saginaw Type II power steering pumps will produce the proper pressure, and the pulley is sized to operate the pump at the proper speed when used with the factory drive system on Gen III Hemi engines with a factory timing cover. The hardline adapter moves the power steering hose connection to a more easily accessible location for ease of installation and maintenance. Features and benefits: * Low-pressure power steering pump kit—for use with factory low-pressure steering boxes on muscle cars and trucks with Gen III Hemi engine * Works with factory "truck style" accessory drive system for 2009-2022 5.7L Ram 1500 Gen III Hemi engines—and some additional applications * Works with factory timing cover (Mopar P/N: 53022195AM) * Helps prevent damage to steering box on older vehicles (due to excessive pressure) * 6-rib billet aluminum pulley with black anodized finish—sized for proper pump speed * Power steering pump assembly includes a plastic reservoir * Special hardline moves -6 AN hose connection to a more accessible location

Not Yet Reviewed

$486.95

Holley Power Steering Mounting Plates

Holley power steering mounting plates provide the perfect solution for the factory power steering pumps on late-model engines that have too much pressure for the steering box on most older muscle cars and trucks. These billet aluminum mounting brackets bolt to existing tapped holes on the left side of the cylinder head of Gen III Hemi style engines. Keep your power steering pump securely in place with Holley power steering mounting plates.

Not Yet Reviewed

$68.25

—

$81.95

On Sale

Holley Gen III Hemi Low Pressure Power Steering Pumps

The late-model factory power steering pump on the Mopar Gen III Hemi engines has too much pressure for the steering box on most older muscle cars and trucks, so Holley developed a low pressure power steering pump for Gen III Hemi swaps. These special Saginaw Type II low pressure power steering pumps produce the proper pressure, and the 6-rib billet aluminum pulley is sized to operate the pump at the proper speed when used with the existing drive system on Gen III Hemi engines. The special hardline adapter moves the power steering hose connection to a more accessible location for an easy installation and maintenance. Features and benefits: * Low-pressure power steering pump it—use with factory low-pressure steering boxes on muscle cars and trucks with Gen III Hemi engine * Works with factory "car style" accessory drive system and fits 2003-2008 5.7L and 2005-2010 6.1L Gen III Hemi engines * Also fits some 2009-2013 5.7L and 2011-2013 6.4L with 4.34-inch belt spacing * Prevents damage to steering box on older vehicles * Billet aluminum mount with black anodized finish bolts to existing tapped holes on the left side cylinder head of Gen III Hemi engines * 6-rib billet aluminum pulley with black anodized finish sized for proper pump speed * Power steering pump assembly includes a plastic reservoir * Special hardline moves -6 AN hose connection to a more accessible location

2.0 out of 5 stars ( 1 )

$549.95

$493.95

Holley Short Spacer Power Steering Brackets

Holley short spacer power steering brackets are offered to secure your pump. They feature aluminum construction with a natural or black finish. You can count on these Genuine Holley Quality Parts to fit and perform properly. Choose your preferred finish.

Not Yet Reviewed

$199.95

—

$243.95

On Sale

Holley Retro-fit Hydraulic Power Steering Kits

Holley retro-fit hydraulic power steering kits for GM LT4/LT5 engines are here to rescue anyone looking to put an LT4/LT5 crate motor or junkyard motor into their vehicle initially equipped with hydraulic power steering. The design incorporates a splined dual-bearing system that eliminates belt stresses on the P/S pump's internal bearings, assuring long life. Versions of the power steering drives are available for LT4/5 dry-sump and LT4 wet-sump applications. Please order accordingly. Features of Holley retro-fit hydraulic power steering kits include: * Works with your OE accessories and brackets * Supercharger drive maintains the original/optimized belt path and tensioner * Throttle body angle-correcting adapter that better positions the TB for swap applications * Original equipment Type II power steering pump included for OE looks and reliability * Power steering hard line adapters included * Maintains OE pulley ratios for optimal accessory performance * Allows for installation and use of larger supercharger crank pulley (15 percent overdrive or 9.44 in. diameter)

Not Yet Reviewed

$1,699.95

$962.45

—

$1,399.95

On Sale

Holley Long Spacer Power Steering Brackets

Holley long spacer power steering brackets are available for GM LT4 and LT5 systems. These accessory drive brackets feature aluminum construction and are available with a black or natural finish. Select the one designed for your drive system in the finish preferred.

Not Yet Reviewed

$228.95

$128.70

—

$286.95

Holley Power Steering Bracket Add-On Spacer Kits

Set your P/S pump and bracket with the proper clearance using Holley power steering bracket add-on spacer kits. Machined from aluminum, they are available in a natural or black finish, and will work with wet or dry sump. Select the kit for your setup with the preferred finish.

Not Yet Reviewed

$56.75

On Sale

Holley Main Power Harnesses

Holley main power ignition harnesses are designed for use with your Holly EFI systems. These wiring harnesses work with other Holley components to correctly configure your EFI system.

5.0 out of 5 stars ( 1 )

$106.95

$61.85

—

$96.25

On Sale

Holley Power Shot Chrome Air Cleaner Assemblies

The 14 in. x 3 in. Holley chrome air cleaner assemblies add a touch of class and style to your street/strip machine. They use the Power Shot filter, which outperforms the competition. They also provide more horsepower and torque, while offering maximum protection for your engine.

4.56 out of 5 stars ( 18 )

$133.95

$120.55