Availability
Legendary Holley carburetors have powered professional racers to victory for years, and you can bolt the same technology onto your engine. Every Holley carb is built...
Legendary Holley carburetors have powered professional racers to victory for years, and you can bolt the same technology onto your engine. Every Holley carb is built in the USA and 100-percent flow tested for no-hassle, out-of-the-box performance. Holley fuel pumps, fuel injectors, throttle bodies, and EFI system are manufactured using that same proven quality control. Bring a renowned Holley carburetor, fuel pump, or any other high-quality air and fuel system part to your street machine, competition vehicle, boat, or daily driver. Shop Holley at Summit Racing now!
Legendary Holley carburetors have powered professional racers to victory for years, and you can bolt the same technology onto your engine. Every Holley carb is built in the USA and 100-percent flow tested for no-hassle, out-of-the-box performance. Holley fuel pumps, fuel injectors, throttle bodies, and EFI system are manufactured using that same proven quality control. Bring a renowned Holley carburetor, fuel pump, or any other high-quality air and fuel system part to your street machine, competition vehicle, boat, or daily driver. Shop Holley at Summit Racing now!
On Sale
Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.
( 39 )
$1,299.95
$1,033.95
—
$1,249.95
On Sale
Holley LS Modular Lo-Ram EFI intake systems have a top-feed plenum entry configuration, designed to allow the currently available Hi-Ram 105mm plenum tops to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications and was conceived to package with an air-to-water plenum-mounted intercooler—with a shorter overall height than is possible with other existing intake manifolds. Using a modular design, the top-feed plenum configuration with 105mm top keeps the overall height at just 9.07 in.! Additional features and specs include: * Cast aluminum construction * Modular design allows the use of the included top-feed plenum entry * Designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads * Will also work with OE or aftermarket cylinder heads * Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000 to 8,000 rpm, depending on application * Low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration (or to fit under a stock or mildly modified hood in the front-feed configuration) * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits come with two sets of brackets—a set for long (usually standard length) fuel injectors, and a set for short (such as Pico or LS7) fuel injectors
( 1 )
$1,149.95
$747.95
—
$1,249.95
On Sale
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$999.95
$898.95
—
$1,049.95
On Sale
Holley EFI LS Mid-Rise intake manifolds are designed for your high performance race engine. They're an excellent choice for street and performance street/strip applications. They're intended for big cube and high-rev applications without height limitations. The modular design of these manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Mid-Rise intake manifold bases from Holley.
( 7 )
$1,099.95
—
$1,149.95
$988.95
—
$1,033.95
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$649.95
—
$1,249.95
$583.95
—
$1,123.95
On Sale
Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.
( 1 )
$899.95
—
$999.95
$808.95
—
$898.95
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$949.95
$467.95
—
$1,399.95
On Sale
Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band
( 2 )
$949.95
—
$1,299.95
$853.95
—
$1,168.95
On Sale
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$682.95
$538.95
—
$724.95
On Sale
Holley EFI LS single plane mid-rise intake manifolds are great for your higher horsepower engine. Featuring cast aluminum construction, these manifolds are also great for centrifugal blower, turbocharged, or NOS mild power adder applications. The efficient casting design is lightweight--11.5 lbs.--with consistent wall thickness and strong mounting flanges. The optimized runner layout and constant cross sectional area offer a broad torque curve, with the best vehicle performance from 2,500 to 7,000 rpm. The mid-rise design offers minimum carb mounting flange height--without sacrificing power--and is another plus for vehicles with minimum hood modifications. Holley EFI LS single plane mid-rise intake manifolds include zinc-plated hex head cap mounting bolts and washers, pipe plugs to block manifold vacuum and MAP sensor ports, and Viton® O-ring cylinder head mounting flange gaskets for an OEM-style seal.
( 9 )
$479.95
—
$549.95
$274.95
—
$493.95
On Sale
Holley LS split design carbureted intake manifolds are single-plane racing units designed with performance in mind. They feature a race-bred, 2-piece split feature that was previously only found on the most expensive race intakes. The manifolds will fit GM LS Gen III engines with cathedral port heads—and are intended for 4150-style square bore flanged carburetors or throttle body EFI. The LS Race single-plane intake manifold was designed for high performance/racing engine applications, 5.3 to 6.2+ liter displacement—and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the rpm spectrum, while providing maximum performance up to 7,000 rpm. Features include: * Maximum performance race design with hood clearance consideration * Lighter than other split race intakes * Split feature allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap * Shoulder bolt locators and O-ring seal make reassembly simple and precise * 33 to 50 percent the price of other split race intakes * Vacuum port options: Two 1/8 in., one 1/4 in., and one 3/8 in. NPT ports at the carb flange
( 6 )
$771.95
$424.95
—
$749.95
On Sale
Bolt a carburetor onto your LS engine using Holley LS mid-rise carbureted intake manifolds. These intake manifolds work on all GM LS, Gen III, or Gen IV engines equipped with rectangular or cathedral port cylinder heads. Available in a single or dual plane design, these manifolds use an O-ring cylinder head mounting flange to provide an OEM seal and make installation a snap. You'll also receive mounting bolts, washers, and pipe plugs for the manifold vacuum and MAP sensor ports.
( 46 )
$573.95
$302.95
—
$549.95
On Sale
Holley's low-profile intake manifold for Ford's 7.3L Godzilla engine, when paired with a 20-340/20-340BK oil pan and accessory drive kit, allows for easy installation into vintage vehicles, kit cars, and other space-restricted applications while retaining the factory hood. The design focus for these manifolds was equal cylinder distribution and great street manners. The low-profile intake manifolds offer a much cleaner alternative to the original plastic intake; they provide anywhere from 2 to 3.5 in. of additional clearance, will correct the OE throttle body angle by 55 degrees, and increase the opening to 92mm. With three throttle body options, sturdy cast aluminum construction, a removable lower panel, and long runners to maintain the 7.3L's already substantial torque offering, this is a must-have for any Godzilla project. Throttle Body Options: * 1) 1986-1993 5.0L Mustang style drive-by-cable throttle bodies * 2) 2020-2023 7.3L drive-by-wire throttle body * 3) 2020-2023 GT500 drive-by-wire throttle body (requires P/N 300-903) Compatible Engine Components: * 1) Factory accessories as well as Holley accessory drives (except for 20-380 and 97-409) * 2) Factory fuel rails and Holley 534-265 / 534-266 billet rails Intake manifold features: * Lower profile (2+ inches) than the OE intake manifold * Sturdy cast aluminum construction that will hold up to the elements and forced induction * Perfect complement to Holley's Godzilla accessory drive and oiling system (20-320 / 20-320BK / 20-340 / 20-340BK) for fitment into tight engine bays * Removable lower intake panel that can be removed for additional porting, nitrous, etc. * Incorporates long runners for solid low-end torque * Includes throttle body gasket and all necessary O-rings and adapters to mount to the engine * Compatible with OE or Holley accessory drives and OE or Holley fuel rails * Corrects OE throttle body angle by 55 degrees * Available in natural or black powdercoat finish
Not Yet Reviewed
$927.95
—
$949.95
$617.95
—
$834.95
Holley 5.0L EFI intake manifolds may be emissions-legal, but don't let that fool you into thinking they're restrictive--they flow tons of unrestricted air! They feature a 2,000 to 6,500 rpm power band, external EGR-passage maximized port and runner sizes, and they retain the stock injector and water outlet locations. The lower manifold ports match up to Holley cylinder heads, so you can be assured of getting the perfect match in the perfect power setup.
( 5 )
$1,149.95
—
$1,249.95
On Sale
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$471.95
$359.95
—
$423.95
On Sale
Holley modular Ultra Lo-Ram intake manifold kits feature a design custom-made for LS engines equipped with LS cathedral port cylinder heads, as well as OEM or aftermarket models. They provide an ideal solution for forced-induction (supercharged or turbocharged) engine applications and select throttle bodies—plus the base intake manifold features a lower overall height to fit under a stock or mildly modified hood. The included fuel rail kits come with two sets of brackets: a set for long (usually standard length) fuel injectors and a set for short (such as Pico or LS7) fuel injectors. The Holley LS modular Ultra Lo-Ram EFI intake manifolds best suited for your application also allow the use of front-feed plenum entry. More product features, items, and notes include: * Designed for forced-induction engine applications with peak power at 7,000 to 8,000 rpm (depending on the application) * Intake design facilitates custom inlet duct and throttle body placement * Allows design and fabrication of special throttle body adapters or inlet ducts for custom installations * Different finishes available for the best look to match your ride * Mounting hardware * With forced induction and the short runner length, the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger you use
Not Yet Reviewed
$999.95
—
$1,049.95
$898.95
—
$943.95
On Sale
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$949.95
—
$1,499.95
$853.95
—
$1,348.95
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$812.95
—
$1,123.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$1,049.95
$493.95
—
$849.95
On Sale
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$573.95
$383.95
—
$549.95
On Sale
Complete your EFI Hi-Ram manifold with a Holley Hi-Ram intake manifold top. These intake manifold tops, along with their matching bases, are made from cast aluminum—with either a natural or black finish. They provide a cost-effective option for your high performance applications where induction system height is not limited. Get aggressive, bold styling and performance with a Holley EFI Hi-Ram intake manifold top.
Not Yet Reviewed
$474.95
$219.95
—
$474.95
On Sale
Clearance
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$912.95
$447.50
—
$875.95
On Sale
Developed with performance in mind, Holley EFI LS single plane split-design race intake manifolds feature a race bred, 2-piece split design that was previously found only on the most expensive race intakes. These manifolds will fit GM LS Gen III engines with cathedral port heads for high performance/racing engine applications with 5.3 to 6.2 liter displacement and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. The single-plane design provides optimal performance across the rpm spectrum, while the split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, makes custom porting and matching a snap. Shoulder bolt locators and an O-ring seal makes reassembly simple and precise.
( 4 )
$821.95
$628.95
—
$738.95
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,299.95
$687.95
—
$1,299.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
