Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale
Holley LS Engine Accessory Drive Kits
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 53 )
$270.95
On Sale
Holley EFI Gen V LT Single Plane Intake Manifolds
Holley EFI Gen V LT single plane intake manifolds are designed with an optimized runner layout and a constant cross-sectional area, resulting in a broad torque curve with the best vehicle performance from 2,500 to 7,000 rpm. The single-plane design provides the lowest throttle body flange height possible, while providing maximum performance all the way to 7,000 rpm. The cast aluminum construction makes these manifolds great choices for centrifugal blowers, turbochargers, or NOS applications. They are sold for pre-emissions control applications only and will not accept stock components and hardware. Available in two finishes, choose the one you prefer. Features: * Optimized runner layout and constant cross sectional area--broad torque curve * Minimum carburetor flange height--fit in vehicles with minimum hood modifications * Provides classic engine bay look of carburetor-style intake * Cast aluminum construction--great manifold for centrifugal blower, turbocharged, or NOS mild power adder applications * Efficient casting design--lightweight, consistent wall thicknesses, improved casting quality * Weight: 11.5 lbs. * Height: (front) 5.417 in. to the lifter valley cover flange at the engine block front flange and bellhousing flange * Port size: 2.33 in. height x 1.27 in. wide * FKM O-ring intake to cylinder head gaskets Notes: These intake manifolds are meant for GM Gen V LT engines equipped with OE-type GM Gen V LT cylinder heads where the intake flange bolt pattern and intake port opening locations match the OE Gen V LT port configuration. They are intended for OE direct injection and a 4150 EFI throttle body. Holley accessories available to allow the installation of a GM LS 92mm or 105mm drive-by-wire throttle body. Holley EFI Gen V LT 300-940 manifold is meant for street and performance engine applications with 5.3 to 6.2+ liters of displacement and maximum engine speeds of 6,000 to 7,000 rpm (depending on the engine combination). 4150/4160 square bore flange.
Not Yet Reviewed
$460.95
$413.95
On Sale
Holley EFI Hi-Flow Billet Fuel Rails
Holley EFI Hi-Flow billet fuel rails offer flow capacity for high horsepower applications and billet aluminum construction that is machined and black anodized for great style under the hood. Laser-etched with the "Holley EFI" logo, the fuel rails feature a 5/8 in. diameter fuel passage, -8 ORB ports on each end, and an 1/8 in. NPT port for a fuel gauge installation if you choose to do so. Holley EFI Hi-Flow billet fuel rails are designed with the factory injector clip reliefs so that your factory injectors and retaining clips can be reused. This is important as the clips locate the injector radially for proper injector spray pattern onto valves. The kits include fuel rails, mounting brackets, and required mounting hardware.
( 3 )
$255.95
Holley Crankshaft Trigger Wheels
Get the best possible sensor pickup with Holley crankshaft trigger wheels. These wheels have 60 notches, plus one TDC double notch. They are available in a number of different sizes to support the clearances on different engines from 5 in. to 8 1/2 in. in diameter. The center hole is 1 in. in diameter and may require machining for application.
Not Yet Reviewed
$306.95
On Sale
Holley LS Engine Alternator and Power Steering Brackets
Holley LS engine alternator and power steering brackets are designed to help you get your alternator and power steering pump mounted in the proper location. They include the necessary hardware to mount the assembly in place. An application-specific installation kit may be required, and must be purchased separately if needed.
( 13 )
$299.95
$269.95
—
$306.95
On Sale
Holley Alternator Brackets
Holley alternator brackets are the perfect solution to mounting your alternator when a new brackets is needed. Made from high-quality materials and available in multiple finishes Holley alternator brackets will look great under the hood of any show car. Order the model recommended for your engine application.
( 2 )
$390.95
$351.85
On Sale
Holley Gen V LT Accessory Drive Installation Kits
Holley Gen V LT accessory drive installation kits allow the use of high-mount LS accessory drive systems on LT engines. These kits allow you to choose the source for supplemental accessories and components that are often already on a donor engine or host vehicle. This drive system has incorporated an upgrade to the conventional looking and central located (Camaro style) LS water pump that works in conjunction with an OEM LT1 truck harmonic balancer. Holley Gen V LT accessory drive installation kits include spacers for the LS style brackets, water pump spacers, solenoid reclocking retainer ring, re-routed front harness, and all hardware. Other features: * No engine modification required * Hides temperature sensor and harness connector from site * Cost effective and proven solution * Utilizes conventional single sided belt * Easy way to add power steering with your Gen V LT swap
Not Yet Reviewed
$299.95
$269.95
On Sale
Holley Replacement Crankshaft Pulleys
Holley replacement crankshaft pulleys are made from steel and finished in black. These are the correct components and service parts for your Holley mid-mount accessory drive kits.
Not Yet Reviewed
$383.95
On Sale
Holley Power Steering Pumps
Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.
( 1 )
$449.95
Holley Ford 7.3L Godzilla Timing Covers
Holley Ford 7.3L Godzilla cast aluminum timing covers are available in natural and black powdercoated styles to fit Godzilla engines with Holley's high-mount accessory drive system with Holley pan or OE pan. Choose the correct one for your Holley Godzilla system.
Not Yet Reviewed
$287.95
—
$357.95
On Sale
Holley Cooling Manifolds
Holley cooling manifolds are designed for use with their mid-mount accessary drive systems. These aluminum manifolds are offered with a black, polished, raw, or satin finish. Keeping your vehicle cool is the key to maximum performance. Holley cooling manifolds will help dissipate some of that extra heat.
( 3 )
$421.95
—
$449.95
On Sale
Holley Sniper EFI Dual-Plenum Intake Linkage Kits
Holley Sniper EFI dual-plenum intake linkage kits are effective solutions to handle dual cable driven throttle bodies. They provide all brackets, plates, throttle cables, hardware, and detailed instructions to offer a complete and seamless installation. Linkage kits are available in a silver or black finish and 92mm and 102mm throttle bore diameters to offer solutions for all Holley Sniper dual plenum intake manifolds.
Not Yet Reviewed
$499.95
$281.55
On Sale
Holley Sniper Throttle Bodies
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 40 )
$374.95
Holley Power Steering Pump Kits for Gen III Hemi Engines
Holley offers power steering pump kits that are ideal for Gen III Hemi engine swaps. The late-model factory power steering pump on the Mopar Gen III Hemi engines have too much pressure for the steering box on most older muscle cars and truck models. These special Saginaw Type II power steering pumps will produce the proper pressure, and the pulley is sized to operate the pump at the proper speed when used with the factory drive system on Gen III Hemi engines with a factory timing cover. The hardline adapter moves the power steering hose connection to a more easily accessible location for ease of installation and maintenance. Features and benefits: * Low-pressure power steering pump kit—for use with factory low-pressure steering boxes on muscle cars and trucks with Gen III Hemi engine * Works with factory "truck style" accessory drive system for 2009-2022 5.7L Ram 1500 Gen III Hemi engines—and some additional applications * Works with factory timing cover (Mopar P/N: 53022195AM) * Helps prevent damage to steering box on older vehicles (due to excessive pressure) * 6-rib billet aluminum pulley with black anodized finish—sized for proper pump speed * Power steering pump assembly includes a plastic reservoir * Special hardline moves -6 AN hose connection to a more accessible location
Not Yet Reviewed
$486.95
Holley Ford 7.3L Godzilla Alternator Kits
The factory alternator on the 2020 and up Ford 7.3 L Godzilla engine is a bulky single or dual alternator design that is tough to package in an engine swap. The Holley Ford 7.3L Godzilla alternator kits provide a more compact solution for extra clearance and works with the factory timing cover, water pump, damper/crank pulley, and intake manifold. They also will work with after-market damper/crank pulley. The bracket and alternator are compact and lightweight, and the Holley alternator is easy to wire and does not require the factory ECU to function like the OE alternator. Holley includes the plug/pigtail, pulleys, and belt in a complete kit. Please note the included belt is for alternator-only applications, but the instructions specify the belt for other configurations. The bracket allows for any accessory configuration, and it works with or without the air conditioning compressor and with or without a power steering pump. Features and details: * Alternator kit and mounting bracket for Ford Godzilla 7.3-liter engine swaps * Great solution with everything needed to add an alternator to the Ford 7.3-liter crate engine * Eliminates bulky dual alternator system—factory setup on some heavy-duty trucks * Works with the factory timing cover, water pump, damper/crank pulley, and intake manifold—also works with after-market damper/crank pulley * Compact design with alternator pulled in tight to the engine for extra clearance under the hood * The mounting bracket is compatible with Holley alternator models: PN: 197-300, 197-301, 197-302, and 197-303 * Easy wiring of alternator and does not require factory ECU to excite alternator—wiring pigtail included * Choose from a complete kit with 105-amp Holley alternator (PN: 20-380), or bracket kit (PN: 97-409) * Natural as cast finish on the mounting bracket and alternator * Works with or without an air conditioning compressor * Works with or without a power steering pump * For alternator-only race setup, Holley bracket PN: 97-409 should be used with Holley premium alternator (PN: 197-302 or 197-303)—ideal for high rpm applications (alternator designed and tested for up to 30 percent higher rpm) * Ideal for use on Godzilla crate engines and engine swaps
Not Yet Reviewed
$460.95
On Sale
Holley Mechanical Water Pumps
Does your donor engine have a questionable water pump? Or, did you just discover after starting an engine swap that the accessories are interfering with things? Changing the belt alignment can help and, thankfully, Holley mechanical water pumps can get you there with ease. These pumps will fit a variety of applications and belt alignments—including the most popular and cost-effective truck engines. They're a budget-friendly option that will fit nicely under the hood. The water pumps even work with most truck accessories without changing out your entire accessory drive system to match their belt alignment. Holley Performance just keeps making swaps easier and easier! Order your OE replacement model, or the design and configuration that best suits your engine.
( 12 )
$426.95
On Sale
Holley LS Engine Air Conditioner Brackets
Holley LS engine air conditioner brackets are designed to help you mount your A/C compressor and tensioner in the correct position. They include the necessary hardware to mount the assembly in place—and require an application-specific installation kit, sold separately. Holley cast aluminum brackets are available for a variety of compressor styles. Choose the model needed for your application.
( 30 )
$357.95
On Sale
Holley Long Spacer Power Steering Brackets
Holley long spacer power steering brackets are available for GM LT4 and LT5 systems. These accessory drive brackets feature aluminum construction and are available with a black or natural finish. Select the one designed for your drive system in the finish preferred.
Not Yet Reviewed
$255.95
—
$286.95
On Sale
Holley LT Modular Hi-Ram Intake Manifold Tops
Fit your GM Gen V LT1 Holley Hi-Ram manifold with one of their LT Hi-Ram intake plenum tops. Holley offers several versions of these cast aluminum units for your dual 4150 or 4500 carburetors. They're available with a black or natural finish. Complete your tunnel ram intake with Holley LT Modular Hi-Ram intake manifold tops; order the model recommended for your year/make and engine application. Features include: * Modular design with removable top * Overall height: 12.10 in. with carb-style top * Height at plenum flange: 9.44 in. * O-ring seals on plenum top * Easy assembly with top-mounted screws on plenum top (all except front two screws)
( 1 )
$286.95
Holley EFI Coyote Ultra Lo-Ram Plenum Lids
The Holley EFI Coyote Ultra Lo-Ram plenum lids are compatible with the Holley EFI Ultra Lo-Ram base. Offering this plenum top separately allows you to select your components individually as you build your system. As-cast aluminum construction, these Ultra Lo-Ram plenum lids are more durable for boosted applications and are available in either natural or black ceramic finishes. This is the plenum top only. Select the model for your application.
Not Yet Reviewed
$306.95
