Availability
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$460.95
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$255.95
—
$327.95
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$322.95
—
$409.95
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$475.95
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 249 )
$449.95
On Sale
Bolt a carburetor onto your LS engine using Holley LS mid-rise carbureted intake manifolds. These intake manifolds work on all GM LS, Gen III, or Gen IV engines equipped with rectangular or cathedral port cylinder heads. Available in a single or dual plane design, these manifolds use an O-ring cylinder head mounting flange to provide an OEM seal and make installation a snap. You'll also receive mounting bolts, washers, and pipe plugs for the manifold vacuum and MAP sensor ports.
( 46 )
$425.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 144 )
$388.95
$260.10
—
$499.95
Holley 525 LPH fuel pump modules are designed and engineered to meet the demands of today's high-pressure and high-flow engines with efficiency, reliability, and decades of engineering expertise. These high performance components with OE-quality and fitment in mind will deliver maximum fuel flow throughout a wide pressure range to support major horsepower. Kit includes assembled module, a new filter sock, flange O-ring, and the lock ring to help complete installation into stock fuel tanks. Holley 525 PLH fuel pump module features: * 6061-T6 Aluminum fuel pump module with a 525 LPH (liters per hour) * Sniper pump assembly drops into stock EFI fuel tank on select vehicles * 6AN O-ring outlet and return ports for easy plumbing connections * Can be used with both carbureted and EFI (Electronic Fuel Injection) fuel systems depending on your needs * Supports up to 1200 EFI or 1450 carb (hp at 60 psi at 13.5 V/16.9 amp draw; individual systems will vary based on fuel system design, the regulator type, fuel cell location, etc.) * Flange is bright dip black anodized for corrosion protection from undercar moisture
( 2 )
$441.95
On Sale
Mopar's popular Gen III Hemi engines are ideal for swapping into muscle cars since they are durable, reliable, and make great power. The factory oil pans that come on these engines usually do not fit and hang too low for your swap. Holley Gen III Hemi retrofit oil pans' cast aluminum construction and integrated windage tray combined with the O-ring sealing provide an attractive leak-free solution for your engine swap. With the included pickup assembly and mounting bolts, Holley Gen III Hemi mid-sump engine swap oil pans have everything you need for installation.
( 7 )
$422.95
—
$499.95
Holley EFI LS single plane mid-rise intake manifolds are great for your higher horsepower engine. Featuring cast aluminum construction, these manifolds are also great for centrifugal blower, turbocharged, or NOS mild power adder applications. The efficient casting design is lightweight--11.5 lbs.--with consistent wall thickness and strong mounting flanges. The optimized runner layout and constant cross sectional area offer a broad torque curve, with the best vehicle performance from 2,500 to 7,000 rpm. The mid-rise design offers minimum carb mounting flange height--without sacrificing power--and is another plus for vehicles with minimum hood modifications. Holley EFI LS single plane mid-rise intake manifolds include zinc-plated hex head cap mounting bolts and washers, pipe plugs to block manifold vacuum and MAP sensor ports, and Viton® O-ring cylinder head mounting flange gaskets for an OEM-style seal.
( 9 )
$491.95
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$603.95
$265.01
—
$481.95
Holley HP EFI smart coil sub harnesses contain two preterminated harnesses designed to work with Holley HP smart coils used on 8-cylinder engines. One end plugs directly into the Holley smart coil, and the other end features a 7-pin Metri-Pak connector that plugs into the Holley universal coil-on-plug harness (HLY-558-307, not included), Holley LSx main harness, or factory GM LSx harnesses.
( 4 )
$286.95
—
$293.95
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$255.95
—
$425.95
Holley harmonic balancers are offered for a variety of internally or externally balanced applications; in versions for engines requiring weighted or non-weighted balancers. All are accurately balanced and carefully machined for correct fit. Holley harmonic balancers feature clear, white, easy-to-read timing marks against a painted black background.
( 1 )
$342.95
On Sale
Holley cooling manifolds are designed for use with their mid-mount accessary drive systems. These aluminum manifolds are offered with a black, polished, raw, or satin finish. Keeping your vehicle cool is the key to maximum performance. Holley cooling manifolds will help dissipate some of that extra heat.
( 3 )
$434.95
—
$460.95
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$449.95
On Sale
Holley LS engine air conditioner brackets are designed to help you mount your A/C compressor and tensioner in the correct position. They include the necessary hardware to mount the assembly in place—and require an application-specific installation kit, sold separately. Holley cast aluminum brackets are available for a variety of compressor styles. Choose the model needed for your application.
( 29 )
$277.95
—
$375.95
Holley RetroFilter air cleaners cleverly hide an LS drive-by-wire throttle body inside to maintain a low height and classic looks. Utilizing a hidden opening in the base to hide unsightly wiring from the throttle body, this trick air cleaner allows you to experience all the benefits of modern technology and keep the vintage look you want. Pair with any Holley intake manifold with a 4150/4610 square bore flange for maximum aesthetics and performance. The opening is 92mm, but any 4-bolt pattern LS throttle body will physically fit. Holley recommends the LS2/LS3/LS7 style but the L33, L76, and L92 should also fit. RetroFilter DBW air cleaners are available in a 16 in. round or 14 in. dual snorkel style with either a black or chrome finish. Choose the one you prefer under the hood of your vehicle. Features: * Allows full EFI functionality stealthily hidden within a traditional looking air cleaner package * Each kit includes a 3 in. tall, pre-oiled, washable, and reusable premium cotton gauze filter element * Adapts to LS-style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc. * Can be installed on any vehicle running a top mounted 4150/4-barrel EFI capable intake manifold with LS3 DBW wiring components * Stamped aluminum lid and base for optimal durability and lightweight Note: Requires adapter to connect to 4150/4160 square bore flange-style manifold. Holley EFI part no. 17-93 is recommended.
( 2 )
$269.95
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$409.95
—
$427.95
Complete your EFI Hi-Ram manifold with a Holley Hi-Ram intake manifold top. These intake manifold tops, along with their matching bases, are made from cast aluminum—with either a natural or black finish. They provide a cost-effective option for your high performance applications where induction system height is not limited. Get aggressive, bold styling and performance with a Holley EFI Hi-Ram intake manifold top.
Not Yet Reviewed
$423.95
—
$485.95
Put your Holley pride on display with a set of attractive Vintage Series valve covers. Their die-cast aluminum construction ensures high detail, while reducing the opportunity for oil leaks and warping of the flange. Choose from among a half-dozen finishes to give your engine a clean, professional look. The vehicle-specific covers are available for every model year dating as far back as 1958.
( 33 )
$279.95
—
$460.95
Does your donor engine have a questionable water pump? Or, did you just discover after starting an engine swap that the accessories are interfering with things? Changing the belt alignment can help and, thankfully, Holley mechanical water pumps can get you there with ease. These pumps will fit a variety of applications and belt alignments—including the most popular and cost-effective truck engines. They're a budget-friendly option that will fit nicely under the hood. The water pumps even work with most truck accessories without changing out your entire accessory drive system to match their belt alignment. Holley Performance just keeps making swaps easier and easier! Order your OE replacement model, or the design and configuration that best suits your engine.
( 12 )
$278.95
Holley Sniper offers transmission-specific controller harnesses for a variety of GM and Ford automatic transmission models. The plug-and-play harnesses are pre-terminated with j4 connectors. Order the harness recommended for your EFI application.
( 1 )
$299.95
Holley M/T valve covers are flashbacks to 1972. Nothing was cooler than cruising in your hot rod with a Holley double pumper and M/T finned aluminum valve covers. Each Holley M/T valve cover is precision-manufactured with knockout plugs for stock PCV and oil fill installations. These covers feature polished top cover surfaces that may be used for engraving your name horizontally next to the deep heat dissipating fins. Available in your choice of black crinkle or a polished finish, each Holley M/T valve cover comes in retro packaging styled after the original. Order the pair designed for your engine application.
( 30 )
$299.95
—
$449.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
