Availability
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 101 )
$1,999.95
—
$2,149.95
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 15 )
$2,349.95
—
$2,549.95
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,949.95
—
$2,149.95
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 123 )
$449.95
—
$699.95
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,549.95
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 246 )
$470.95
$306.95
—
$573.95
Holley Sniper EFI BBD master kits will be right at home on any powered trail rig or weekend cruiser. Not only does the Sniper EFI BBD offer superior throttle response and WOT power over the carburetor, but you can also gain timing control! Put an end to cold start issues, hesitations, vapor lock, and flooding—upgrade to Holley Sniper EFI. Features include: * Bolt-on BBD carburetor replacement * Engineered specifically for 1971-86 Jeep CJs with 258 cu. in. 6-cylinder engines * Throttle body-mounted ECU--no extra boxes to mount * Supports up to 350 hp with two 100 lbs./hr. injectors * Only four wiring connections required—Battery +, Battery -, Switched ignition, and rpm * Internal fuel pressure regulator eliminates the hassle of plumbing an external regulator * Includes complete fuel system: 20 ft. of 3/8 in. vapor guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard: answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust; ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and stainless steel (weldable) oxygen sensor flange * Available in Classic Gold, black, shiny polished
( 10 )
$1,649.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$499.95
—
$514.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 36 )
$549.95
$274.95
—
$699.95
Holley Track Series valve covers are GM licensed and provide an excellent way to add high-end appeal to your favorite Chevy engine. These lightweight, yet tough valve covers are constructed of 6061 T-5 sheet aluminum, precision TIG-welded for a proper fit. They feature laser-etched Chevrolet and Bowtie emblems. The covers are available in silver anodized or black coated finishes, along with various heights to clear most popular rocker arm combinations. All models include mounting hardware for quick and simple installation.
( 69 )
$199.95
—
$230.95
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$999.95
—
$1,049.95
Holley Sniper BBD 2-barrel fuel injection systems offer not only exceptional throttle response and outstanding power gains over a carburetor, but you can also gain timing management. Put an end to cold start issues, hesitations, vapor lock, and flooding. Enjoy all the benefits of EFI by upgrading to this Holley Sniper system—with performance and economical pricing Jeep owners want! Features include: * Bolt-on BBD carburetor replacement * Engineered specifically for 1971-1986 Jeep CJ's with 258ci 6-cyclinder engines * Supports up to 350 hp with two 100 lb./hr. injectors * Throttle body mounted ECU (no extra boxes to mount) * Only four wiring connections required (battery+, battery- , switched ignition, and rpm) * Integrated ignition timing control * Simple calibration wizard * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Internal fuel pressure regulator (preset to 58.5 psi) eliminates the hassle of plumbing an external unit * Self-tuning ECU * OEM-style TPS/IAC and fuel pressure regulator * Bosch LSU 4.9 wideband oxygen sensor (provides real-time fuel map learn) * Clamp-on oxygen sensor kit and all hardware for installation
( 6 )
$1,349.95
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 93 )
$1,449.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 349 )
$230.95
$104.95
—
$286.95
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$464.95
—
$599.95
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$302.95
—
$549.95
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$599.95
—
$682.95
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,049.95
—
$3,249.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 26 )
$632.95
$349.95
—
$632.95
On Sale
Holley steering shafts are easy to assemble and cut to length where needed. They feature mild steel construction with a black E-coat finish to resist corrosion. Choose the version to best fit your application.
( 10 )
$213.95
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$370.95
—
$471.95
Holley GM Gen-V LT engine swap oil pans are designed for LT engine swap installations in classic car and truck chassis' requiring more oil pan to chassis clearance around the front half of the oil pan. GM's new Gen V LT direct injected engines are starting to find their way into a large variety of vehicles. They make great power and are very durable and reliable. Unfortunately, the factory oil pans don't always fit or they hang too low for today's hot rods. The solution? Holley's GM Gen-V LT swap engine oil pans! They will provide maximum clearance to the chassis and ground, plus, they provide an OE-style fitment for durability and proper sealing. Features: * These oil pans are perfect for: 1967-1992 Camaro/Firebird, 1968-1974 Nova/Apollo/Ventura/Omega, 1978-1987 G-body, 1964-1972 A-body, and 1973-1987 Chevy/GMC Full Size Trucks * Designed to provide more oil pan to chassis clearance around front half of the oil pan * Allows for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-Body oil pan can be used * Provides OE-style fitment—OE oil filter mounting, OE oil cooler port provision, OE engine NVH suppression, OE flange gasket and sealing, proper structural rigidity, and OE bell-housing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provides maximum clearance for vehicles where the steering linkage is behind the engine cross-member * Oil cooler port provision * Cast and machined aluminum * 1/2 in. NPT port—ideal for Turbo oil return or PCV oil return * Optional hinge door baffle (available separately) * Complete kit includes: windage tray, sump baffle, OE-style pick-up tube, sump port plug, oil filter stud, billet oil passage cover, etc.
( 2 )
$516.95
—
$549.95
Holley cast aluminum timing covers offer a durable upgrade to the plastic OEM timing chain covers on 1996-up Vortec small block Chevy engines. These aluminum covers feature timing indicators molded into the body and are available with a natural cast or satin black finish. A quality gasket and E-coated mounting hardware for added corrosion resistance are included. Holley cast aluminum timing cover features include: * Available for EFI (with crank sensor provisions) and carbureted applications (without crank sensor provision) * Includes over-molded FKM oil seal, virtually eliminating concerns of the seal spinning out at high temperatures, which is common with other aluminum timing covers * Accommodates both stock and aftermarket water pumps
( 41 )
$89.19
—
$120.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
