Availability
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,249.95
—
$1,299.95
$687.95
—
$844.95
On Sale
Holley Hi-Ram intake manifold plenum tops are constructed of cast aluminum and offered in different finishes to match the bases. They are available in dual 4150 or 4500 pattern, or in a full blank top so that you can design your system. Choose the ideal plenum for your Hi-Ram manifold.
Not Yet Reviewed
$318.95
$175.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 142 )
$267.95
$147.95
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$899.95
—
$1,049.95
$649.95
—
$849.95
On Sale
Shoot for top performance with Holley Sniper shift lights. These compact standalone units allows for endless mounting locations--above a rearview mirror, on the A-pillar, or right in front on the instrument cluster. They are available in black or silver billet aluminum housings with multi-adjustable mounts, and as a direct wire or OBD-II plug connection. The shift lights feature seven super-bright LEDs with five intensity settings (including off). Holley Sniper shift lights also feature: * Smoked front LED and side display lenses for a stealth look when powered off * Simple hookup--does not require the use of a tachometer adapter * Compatible with all 1 to 12 cylinder gas or diesel engines with any ignition system * Adjustable shift point selection in 10 rpm increments * Easy-to-read rpm display and set buttons located on the side of shift light * CAN version has 8 ft. cable with OBDII connector * Direct wire version has 4 ft. wiring harness with non-terminated ends * Available peak recall of maximum rpm achieved * 4.25 in. length, 0.75 in. diameter
( 31 )
$212.95
$117.95
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$849.95
—
$899.95
$467.95
—
$584.95
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$812.95
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
$508.95
—
$799.95
On Sale
Bring retro-styling back to the top of your engine with Holley Vintage Series air cleaner assemblies. Their diecast aluminum construction comes in a variety of finishes and logos. Holley Vintage Series air cleaners also include a carburetor air horn gasket and mounting hardware to complete the installation. Order the size, shape, and other options best suited for your vehicle. Product features include: * Your choice of a replaceable paper or a reusable premium cotton gauze (red) air filter element * Premium cotton gauze filter elements are pre-oiled * Color-matched, stamped steel SureFlo-style bases with knock out provisions for a fresh-air adapter * Filter care instructions
( 61 )
$211.95
—
$219.95
$116.95
—
$120.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$517.95
—
$1,099.95
$284.95
—
$949.95
On Sale
Holley fuel cell EFI pump module assemblies are the easy way to upgrade your racing fuel system! And even though the name includes EFI, the modules can also be used as an upgrade for carbureted systems, with the proper regulator. Designed as drop-in direct replacements for your existing 6 or 12-bolt flange fuel cell cap assembly, the billet top flange includes an 8 AN inlet port, a 10 AN outlet port, and a fuel filler cap. They offer a fully adjustable fuel pump depth from 7.5 in. to 12 in. deep, and the modules are available in single or dual 255 lph and 450 lph fuel pump configurations. Holley fuel cell EFI pump module assemblies include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Order the model that best suits your application.
( 6 )
$565.95
—
$649.95
$311.95
—
$357.95
On Sale
Holley Sniper throttle body spacers provide additional clearance. Topping a Sniper EFI fabricated intake manifold with your stock throttle body may mean that a little more room is needed for proper operation. These spacers will do the trick. They can also be used with stock manifolds to provide additional horsepower and throttle response. Holley Sniper throttle body spacers are machined from billet aluminum (with different finishes) and include O-rings with hardware. Order the model recommended for your vehicle application.
Not Yet Reviewed
$105.95
$58.95
On Sale
For certain applications, higher than normal oil pressure is required. Typically, the oil pan must be removed to change the pressure spring on an oil pump. The Holley oil system allows direct access to the spring through the access port on the bottom front of the pan. Holley's high-pressure spring for Ford 7.3L Godzilla engines with their oil pump and pan can be purchased and installed to increase oil pressure by approximately 10 psi at higher rpms. To change the spring, remove the port plug, spring, and plunger. In some cases, the plunger may stay in the port. Make sure when reassembling the plunger is on top of the spring and oriented correctly.
Not Yet Reviewed
$19.95
$10.97
On Sale
Holley VR Series fuel pressure regulators are part of their VR1 and VR2 Series brushless fuel systems product line. Designed to handle large volumes of fuel flow, they are capable of supporting 3,000+ horsepower. They are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance. Holley VR Series fuel pressure regulators are available in 2-port and 4-port versions for carbureted or EFI-equipped engines. Features include: * EFI regulators are adjustable from 40 to100 psi * Carbureted regulators are adjustable from 4 to 9 psi * Compatible with gasoline, methanol, and E85 * 1/8 in. NPT gauge port * Designed for use with Holley VR1 and VR2 Series brushless in-line fuel pumps * Can be referenced on a 1:1 ratio--a barb fitting and a -4 AN fitting are included for reference connection * 2-port regulators feature -10 AN O-ring inlet/outlet and return * 4-port regulators feature -10 AN O-ring inlet and return with four -8 AN O-ring outlets
( 4 )
$449.95
$247.95
On Sale
Holley double adjustable fuel pressure regulators are designed for belt or cable driven pumps where fuel flow changes with engine rpm. Made from billet aluminum, they are offered in 2-port and 4-port models to complete your fuel system requirements, and the idle adjustment design is strategically placed so that none of the ports are blocked, like other designs. Features include: * Compatible with E85 and alcohol * Individual adjustment settings, one for idle and wide open throttle * Fuel pressure adjustability at idle can help prevent flooding at low rpms * Wide-open throttle settings help to prevent fuel starvation at the top end of the rpm range
Not Yet Reviewed
$389.95
$214.95
On Sale
Holley Sniper EFI fabricated Race Series intake manifolds utilize a larger intake plenum for max effort engines and boosted applications. These manifolds feature 5mm (13/64 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. With their removable tapered top, increased velocity and more evenly distributed airflow to all cylinders is a guarantee! Race Series intakes also include 3/8 in. fuel rail kits, -8 AN fittings, and crossover-braided line capable of supporting 750+ hp. They're available in multiple anodized colors, and every manifold has the Holley Sniper EFI logo.
( 1 )
$1,449.95
$797.95
On Sale
Holley EFI analog display gauges use digitally-delivered information over Holley's sophisticated CAN bus or wire directly to your sending unit, providing your ride with a classic readout. Those using the bus get their data from the Holley ECU, meaning that you don't have to run wires all over the vehicle. All you have to do is run a single cable to the ECU and then daisy-chain the rest. Holley analog gauges are available to monitor a variety of automotive temperature and pressure functions, along with programmable fuel level and voltage options. Product features include: * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric style and may include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on application) to ensure accurate movement in street and racing conditions * CNC-machined billet aluminum bezels with an anodized finish on some models * Threaded bodies allow a single bezel nut to hold the indicators firmly in place * Bezels are threaded for easy replacement with multiple bezel options available * Each is tested to ensure a top-quality, accurate gauge
( 15 )
$179.95
—
$236.95
$98.95
—
$130.95
On Sale
Holley analog standalone gauges provide you with a simple yet modern way to monitor all types of engine and drivetrain functions. Their slim-style mounting requires very little depth, and all of the gauges feature dimmable LED backlighting to ensure you can always see the indicator, no matter the environment. Holley analog standalone gauges are available in a variety of data types and ranges for temperature and pressure monitoring, along with programmable fuel level and voltage options. Features include: * Designed for a 2 1/16 in. openings * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric-style and include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on model) to ensure accurate movement in street and racing conditions * Spin lock ring threads to back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum bezels with anodized finish * Bezels are threaded for easy replacement; multiple bezel options available * Each gauge is tested to ensure a top-quality and accuracy
( 2 )
$192.95
$106.95
On Sale
Holley LS 2x4 dual plane fuel injection intake manifolds allow you to install dual throttle bodies on your late model LS Series engines. Their dual plane, equal-distribution layout produces great midrange torque without compromising top-end power. The manifolds feature all cast aluminum construction, a wide 1,500 to 7,000 rpm power band range, and can accept dual inline mounted 1,000 cfm throttle bodies with a 1.750 in. maximum throttle bore diameter.
Not Yet Reviewed
$699.95
$384.95
On Sale
Put the look of the dual carburetor muscle car era on your late model Chevrolet LS Series engine. Holley LS 2x4 dual plane carbureted intake manifolds continue the tradition of the great Holley 4160 induction systems that competed on the drag strips. Their dual plane, equal-distribution layout produces great midrange torque without compromising top-end power. The manifolds feature all cast aluminum construction, a wide 1,500 to 7,000 rpm power band range, and can accept dual inline mounted square bore carburetors with 1 11/16 in. maximum diameter throttle bores.
( 1 )
$573.95
$315.95
On Sale
Show off your style and preferred brand with these popular Terminator X decals from Holley. They are top-quality and stick easily to most surfaces.
( 1 )
$4.99
$2.80
On Sale
Made of top-quality vinyl, Holley Sniper EFI decals are a peel-and-stick design, allowing them to stick to virtually any surface. Show your EFI brand allegiance with this Sniper EFI decal!
Not Yet Reviewed
$5.99
$5.39
On Sale
Holley offers intake manifold hardware kits for a variety of Chevrolet engine applications from 1997 and up. The installation hardware is available in a silver or black finish.
Not Yet Reviewed
$54.39
$29.91
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
