Availability
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
Holley aluminum Street HP carburetors make tire-smoking performance affordable! They utilize the best features from Holley's Race Bred models but are tamed for street and light competition use, weighing up to 40 percent less and are even easier on your wallet. Each Street HP carburetor features an aluminum contoured main body design with a tumble polished shiny finish and screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability, and maximum performance. A street HP base plate is used so there is plenty of vacuum ports for power brakes, PCV, etc.
( 53 )
$799.95
—
$849.95
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$849.95
Holley Aluminum Street HP carburetors deliver weight savings, lasting good looks, and affordable tire-smoking performance! Utilizing the best features of their race-bred HP and the Double Pumper, Holley offers these amazing street/strip carburetors that weigh 40 percent less—and take less out of your wallet! Street HP carburetors display an aluminum contoured main body design with a tumble-polished, shiny finish, plus screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor, calibrated for a hot street/strip engine setup with outstanding throttle response, drivability, and maximum performance. Finally, they are 100 percent wet-flow tested to ensure that they arrive ready-to-run. More Holley Aluminum Street HP carburetor features: * Contoured Venturi inlet offers balanced airflow for increased horsepower * Four-corner idle for precise idle control * Mechanical secondaries for impressive tire-turning performance * Dual accelerator pumps for additional fuel under initial acceleration * Dual feed fuel inlets for constant, high-volume fuel delivery * Available in 650, 750, 850, and 950 cfm versions * Street HP base plate is used, so there are plenty of vacuum ports for power brakes, PCV, etc. * Intended for lightweight vehicles with manual transmission or automatics with a high stall and low gearing
( 37 )
$799.95
Holley 4150 Double Pumper carburetors are a perfect upgrade for hot street cars and race vehicles—they're an American icon when it comes to performance. From their roots as the premier carb on many factory muscle cars, to powering thousands of vehicles across the finish line, the Double Pumper is a great choice—whether you're burning up the street or the quarter-mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission—or an automatic transmission with a high stall and low rear-end gears. These carburetors are available in a gold dichromate or tumble polished shiny finish, along with these features: Dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high-volume fuel delivery; and a manual choke for easy control of engine warm up. Order the model with options to suit your application.
( 133 )
$799.95
—
$899.95
Holley EFI Digital Dash gauges are completely customizable, with a variety of gauge and indicator screens that can be programmed to display any parameter you need. They also offer a virtual switch panel, user-defined alarms, configurable shift lights, and can control on-screen playback of your EFI data logs. The Holley EFI Digital Dash gauges measure 7.5 in. wide, 4.625 in. tall, and 1 in. deep, which makes them compact, customizable dashes for use in a variety of motorsports applications. The digital dash gauges feature a low-glare, high-brightness, high-contrast 800 x 480 resolution, a full-color touch screen for easy viewing even in full sun, and plug and play connection to all Holley EFI systems, as well as a weatherproof aluminum housing featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance! Features include: * Quickly toggle between two or more active screens (tune, warm-up, race, drive, etc.) * Virtual switch panel (replaces the need for physical switches) * User-defined alarms for any input * Configurable progressive shift lights and light bar * On-screen playback of EFI data logs * Download and save Holley EFI data logs to external USB memory stick * Expandable internal storage on micro SD card * Flexible mounting options * Support for future USB devices * Upgradable with future software enhancements * Multiple units can be used simultaneously on a Holley EFI system for larger dashboards * Internal 3-axis accelerometer
( 10 )
$899.95
Designed as a bolt-on replacement for GM's venerable Quadrajet, Holley's 4175 carburetors utilize a front-mounted fuel bowl fitting, allowing you to reuse the stock fuel line. Other features include vacuum secondaries, power valve blowout protection, a spread bore flange, and a choke.
( 4 )
$799.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
—
$1,049.95
The all new Aluminum Street HP's weigh up to 40% less and are even easier on your wallet. Holley is proud to introduce the all new Aluminum Street HP™. They utilize the best features from Holley's Race Bred 4150 HP™ carbs, but are tamed for street and light competition use. The Street HP features an aluminum contoured main body design taken from the race winning 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability and maximum performance. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc. The Aluminum Street HP takes all the great features from the race bred HP and the Double Pumper and combines them into the perfect street/strip carburetor.
( 37 )
$799.95
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$999.95
—
$1,049.95
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they're available in your choice of universal or direct-fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
( 258 )
$849.95
Holley HP™ carburetors have been the standard in racing carburetors for nearly two decades. Powering the biggest names in NASCAR to the Saturday night racer, HP carburetors are the perfect choice for all types of motorsports. Classic HP carburetors are available from 390 to 1000 CFM and feature a contoured venturii inlet for balanced air flow, screw in air bleeds for precision tuning capabilities, high flow metering blocks and Dominator style fuel bowls which allow pluming from either side for ease of installation. Holley HP carburetors are the standard for square bore race carburetors.
( 6 )
$899.95
—
$999.95
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$799.95
—
$999.95
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$949.95
—
$1,016.95
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 20 )
$999.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 142 )
$771.95
Holley EFI Terminator X fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. you are sure to find an injector that matches your non-emissions-controlled application. Holley EFI Terminator X fuel injectors can also be used with any ECU that utilize high-impedance fuel injector drivers. Features: * PICO/EV6-style performance injectors are sold individually or in a set of 8 * High impedance for use with saturated drivers * Rated injector flow 220 lb./hr. at 43 psi of base fuel pressure * USCAR injector connector * 40mm O-ring to O-ring length * Compatible with many OEM LS intake manifolds * Easy to install in any Holley EFI Hi-Ram intake, using Holley fuel rail adapter kit
( 30 )
$799.95
—
$999.95
Push your racing performance to the next level with Holley Track Warrior carburetors. The aluminum contoured main body design weighs less while adding horsepower and torque. These carbs have screw-in air bleeds for precision tuning capabilities, billet metering blocks, a billet base plate, adjustable secondary linkage, and knurled (hand-adjustable) curb idle screws. Features of Holley Track Warrior carbs include: * Aluminum construction for weight savings and long-lasting good looks * Color options include purple or black * Optimized race calibrations for outstanding throttle response * Contoured Venturi inlet offers balanced airflow for increased horsepower * Four-corner idle for precise idle control * Mechanical secondaries for remarkable tire-turning performance * Billet metering blocks for improved durability (compared to cast blocks) * True gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictor, and idle feed restrictors.) * Available in 650, 750, and 850 cfm versions * For lightweight vehicles with manual transmissions or automatics with a high stall and low gearing * 100 percent wet-flow tested by Holley technicians to ensure on-arrival performance
( 31 )
$821.95
—
$949.95
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$786.95
—
$949.95
Holley Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (red, blue, or black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs. less than a comparable zinc carburetor. Holley Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as 4 corner idle for precise idle control, mechanical secondaries for great performance, clear fuel level sight plugs for easy, no mess fuel level adjustments, Ford automatic transmission kickdown for use on popular Ford transmissions, four vacuum ports for all necessary vacuum accessories, and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with red, blue, or black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track.
( 79 )
$899.95
—
$1,049.95
Holley Ultra Street Avenger carburetors take your ride from street to strip with amazing out-of-the-box performance. They feature ultra-light aluminum construction for less weight with billet metering blocks and base plates for ultra strength versus cast pieces. With glass fuel level windows in the bowls, vacuum secondaries, and precise fuel metering, these Ultra Street Avenger carburetors offer you ultra-easy, no-trouble adjustments. Amazing performance under the hood deserves an amazing look as well, and the Holley Ultra Street Avenger carburetors, with their shiny tumble-polished finish, along with anodized metering blocks, base plates, and hardware, are the ultimate in cool. Dare to go beyond the limits--power your machine with Holley Ultra carburetors.
( 17 )
$899.95
Holley modular Ultra Lo-Ram intake manifold kits feature a design custom-made for LS engines equipped with LS cathedral port cylinder heads, as well as OEM or aftermarket models. They provide an ideal solution for forced-induction (supercharged or turbocharged) engine applications and select throttle bodies—plus the base intake manifold features a lower overall height to fit under a stock or mildly modified hood. The included fuel rail kits come with two sets of brackets: a set for long (usually standard length) fuel injectors and a set for short (such as Pico or LS7) fuel injectors. The Holley LS modular Ultra Lo-Ram EFI intake manifolds best suited for your application also allow the use of front-feed plenum entry. More product features, items, and notes include: * Designed for forced-induction engine applications with peak power at 7,000 to 8,000 rpm (depending on the application) * Intake design facilitates custom inlet duct and throttle body placement * Allows design and fabrication of special throttle body adapters or inlet ducts for custom installations * Different finishes available for the best look to match your ride * Mounting hardware * With forced induction and the short runner length, the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger you use
Not Yet Reviewed
$999.95
—
$1,049.95
The carburetor gurus at Holley built these carbs with off-roading in mind. Features include maximum low-end torque and horsepower output, steep angle idle, spring-loaded needles and seats, four vacuum ports, and off-road vacuum secondaries. Their one-piece fuel bowl vent tube eliminates fuel spillover during extreme maneuvers, and their unique metering block provides flood-free operation. You'll have exceptional fuel control over rough terrain with the Holley Truck Avenger carburetor best suited for your off-road needs. Other product features include: * Aluminum-construction models available * Gold dichromate finish * Single-feed fuel inlet for ease of installation * Factory, preset electric choke for effortless startups or manual (cable-driven, hand-operated) choke for precise cold start control (depending on application) * Compatible with GM, Chrysler, and Ford A/T kickdown linkage (additional parts may be required) * 100 percent wet-flow tested assuring it arrives ready-to-run
( 15 )
$799.95
On Sale
Holley fuel cell EFI pump module assemblies are the easy way to upgrade your racing fuel system! And even though the name includes EFI, the modules can also be used as an upgrade for carbureted systems, with the proper regulator. Designed as drop-in direct replacements for your existing 6 or 12-bolt flange fuel cell cap assembly, the billet top flange includes an 8 AN inlet port, a 10 AN outlet port, and a fuel filler cap. They offer a fully adjustable fuel pump depth from 7.5 in. to 12 in. deep, and the modules are available in single or dual 255 lph and 450 lph fuel pump configurations. Holley fuel cell EFI pump module assemblies include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Order the model that best suits your application.
( 6 )
$799.95
—
$828.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
