Availability
Designed as a bolt-on replacement for GM's venerable Quadrajet, Holley's 4175 carburetors utilize a front-mounted fuel bowl fitting, allowing you to reuse the stock fuel line. Other features include vacuum secondaries, power valve blowout protection, a spread bore flange, and a choke.
( 4 )
$799.95
On Sale
By popular demand, Holley is expanding the draw-thru supercharger carburetor line to now include the 4150 XP Series. Like the existing HP line, these carbs are available in 600, 750, and 950 cfm flow rates—and standard polished with black accents. The feature-laden XPs include a contoured venturi inlet for balanced airflow, screw-in air bleeds for precision-tuning capabilities, high-flow billet metering blocks, billet base plate, and Dominator-style fuel bowls which allow plumbing from either side. Supercharger XP carburetors also have a unique capability that allows their power valves to reference the intake manifold vacuum below the supercharger. This enables the power valve to operate as it should, based off intake manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Holley XP carburetors are the standard for square bore race carburetors. Race-Ready out of the box! Order the model with options preferred for your vehicle. Product details: * Tumble polished shiny finish for good looks * Application-specific blower calibration * Contoured venturi inlet offers balanced airflow for increased horsepower * Screw-in air bleeds for precision-tuning capabilities * Dual accelerator pumps for additional fuel under initial acceleration * Dual feed fuel inlets for constant high-volume fuel delivery * 4-corner idle allows you to precisely control your idle system * Mechanical secondaries for perfect off-the-line launches * Boost referenced power valve for proper enrichment under acceleration * Throttle lever cut off for clearance on a sideways application * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
( 2 )
$1,099.95
$988.95
On Sale
Holley 4150 Double Pumper carburetors are a perfect upgrade for hot street cars and race vehicles—they're an American icon when it comes to performance. From their roots as the premier carb on many factory muscle cars, to powering thousands of vehicles across the finish line, the Double Pumper is a great choice—whether you're burning up the street or the quarter-mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission—or an automatic transmission with a high stall and low rear-end gears. These carburetors are available in a gold dichromate or tumble polished shiny finish, along with these features: Dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high-volume fuel delivery; and a manual choke for easy control of engine warm up. Order the model with options to suit your application.
( 133 )
$799.95
—
$899.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$1,049.95
$763.95
—
$999.95
On Sale
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,049.95
$943.95
On Sale
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$849.95
—
$999.95
$763.95
—
$898.95
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$849.95
$763.95
On Sale
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$999.95
$763.95
—
$999.95
On Sale
Holley EFI Coyote Hi-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on Ford Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finishes, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20 percent more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration. Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup * Two 1/8 NPT ports on all manifolds. Two 3/8 NPT ports on all manifolds
( 1 )
$899.95
—
$927.95
$799.95
—
$834.95
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
—
$949.95
$799.95
—
$853.95
On Sale
Holley Sniper EFI fabricated Race Series intake manifolds utilize a larger intake plenum for max effort engines and boosted applications. These manifolds feature 5mm (13/64 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. With their removable tapered top, increased velocity and more evenly distributed airflow to all cylinders is a guarantee! Race Series intakes also include 3/8 in. fuel rail kits, -8 AN fittings, and crossover-braided line capable of supporting 750+ hp. They're available in multiple anodized colors, and every manifold has the Holley Sniper EFI logo.
( 1 )
$1,449.95
$797.95
On Sale
One of the most popular updates for older vehicles is swapping out the carburetor(s) for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and can be difficult to mount properly. Holley Sniper Universal EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They give you the option to install an EFI tank into a vehicle not normally offered. Features include: * Supports up to 550 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Include new tank straps
( 2 )
$949.95
$853.95
On Sale
Holley retro-fit hydraulic power steering kits for GM LT4/LT5 engines are here to rescue anyone looking to put an LT4/LT5 crate motor or junkyard motor into their vehicle initially equipped with hydraulic power steering. The design incorporates a splined dual-bearing system that eliminates belt stresses on the P/S pump's internal bearings, assuring long life. Versions of the power steering drives are available for LT4/5 dry-sump and LT4 wet-sump applications. Please order accordingly. Features of Holley retro-fit hydraulic power steering kits include: * Works with your OE accessories and brackets * Supercharger drive maintains the original/optimized belt path and tensioner * Throttle body angle-correcting adapter that better positions the TB for swap applications * Original equipment Type II power steering pump included for OE looks and reliability * Power steering hard line adapters included * Maintains OE pulley ratios for optimal accessory performance * Allows for installation and use of larger supercharger crank pulley (15 percent overdrive or 9.44 in. diameter)
Not Yet Reviewed
$1,699.95
$934.95
On Sale
Holley aluminum Street HP carburetors make tire-smoking performance affordable! They utilize the best features from Holley's Race Bred models but are tamed for street and light competition use, weighing up to 40 percent less and are even easier on your wallet. Each Street HP carburetor features an aluminum contoured main body design with a tumble polished shiny finish and screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability, and maximum performance. A street HP base plate is used so there is plenty of vacuum ports for power brakes, PCV, etc.
( 53 )
$849.95
$763.95
Classic Holley carbs have been a staple for rodders around the world for decades. They're the perfect performance upgrade for stock to mildly modified vehicles and have that classic Holley look. Dual feed fuel inlets assure you get all the fuel you need while its vacuum secondaries and electric choke make it amazingly universal. Plus, it is gold dichromate coated for durability and classic Holley looks. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years.
( 74 )
$899.95
Holley 4150 supercharger carburetors are ideal for the street or the strip. They feature universal throttle linkage, a square bore flange, a manual choke (unless noted otherwise), dual fuel inlets, mechanical secondaries, 50cc secondary pumps, and a manifold-referenced power valve. Plus, they are 100 percent wet-flow tested and calibrated.
( 3 )
$999.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
