Availability
Holley aluminum Street HP carburetors make tire-smoking performance affordable! They utilize the best features from Holley's Race Bred models but are tamed for street and light competition use, weighing up to 40 percent less and are even easier on your wallet. Each Street HP carburetor features an aluminum contoured main body design with a tumble polished shiny finish and screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability, and maximum performance. A street HP base plate is used so there is plenty of vacuum ports for power brakes, PCV, etc.
( 53 )
$819.95
—
$870.95
Holley Model 4150 aluminum Double Pumper carburetors offer an improved fuel design and efficient construction features for huge 38 percent weight savings over standard carbs. Optimized for street and strip calibration, they provide great performance right out of the box. Holley carburetors include dual accelerator pumps, mechanical secondaries, and dual-feed inlets for constant high-volume fuel delivery. Plus, with power-valve blowout protection and a 100 percent wet-flow test, these units set a standard for performance and reliability that's hard to beat. An attractive tumble polished finish is icing on the cake. Choose the Holley Model 4150 aluminum carburetor for your particular make and model.
( 37 )
$767.95
Holley EFI Digital Dash gauges are completely customizable, with a variety of gauge and indicator screens that can be programmed to display any parameter you need. They also offer a virtual switch panel, user-defined alarms, configurable shift lights, and can control on-screen playback of your EFI data logs. The Holley EFI Digital Dash gauges measure 7.5 in. wide, 4.625 in. tall, and 1 in. deep, which makes them compact, customizable dashes for use in a variety of motorsports applications. The digital dash gauges feature a low-glare, high-brightness, high-contrast 800 x 480 resolution, a full-color touch screen for easy viewing even in full sun, and plug and play connection to all Holley EFI systems, as well as a weatherproof aluminum housing featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance! Features include: * Quickly toggle between two or more active screens (tune, warm-up, race, drive, etc.) * Virtual switch panel (replaces the need for physical switches) * User-defined alarms for any input * Configurable progressive shift lights and light bar * On-screen playback of EFI data logs * Download and save Holley EFI data logs to external USB memory stick * Expandable internal storage on micro SD card * Flexible mounting options * Support for future USB devices * Upgradable with future software enhancements * Multiple units can be used simultaneously on a Holley EFI system for larger dashboards * Internal 3-axis accelerometer
( 10 )
$921.95
Holley Aluminum Street HP carburetors deliver weight savings, lasting good looks, and affordable tire-smoking performance! Utilizing the best features of their race-bred HP and the Double Pumper, Holley offers these amazing street/strip carburetors that weigh 40 percent less—and take less out of your wallet! Street HP carburetors display an aluminum contoured main body design with a tumble-polished, shiny finish, plus screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor, calibrated for a hot street/strip engine setup with outstanding throttle response, drivability, and maximum performance. Finally, they are 100 percent wet-flow tested to ensure that they arrive ready-to-run. More Holley Aluminum Street HP carburetor features: * Contoured Venturi inlet offers balanced airflow for increased horsepower * Four-corner idle for precise idle control * Mechanical secondaries for impressive tire-turning performance * Dual accelerator pumps for additional fuel under initial acceleration * Dual feed fuel inlets for constant, high-volume fuel delivery * Available in 650, 750, 850, and 950 cfm versions * Street HP base plate is used, so there are plenty of vacuum ports for power brakes, PCV, etc. * Intended for lightweight vehicles with manual transmission or automatics with a high stall and low gearing
( 38 )
$767.95
—
$819.95
Holley 4150 Double Pumper carburetors are a perfect upgrade for hot street cars and race vehicles—they're an American icon when it comes to performance. From their roots as the premier carb on many factory muscle cars, to powering thousands of vehicles across the finish line, the Double Pumper is a great choice—whether you're burning up the street or the quarter-mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission—or an automatic transmission with a high stall and low rear-end gears. These carburetors are available in a gold dichromate or tumble polished shiny finish, along with these features: Dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high-volume fuel delivery; and a manual choke for easy control of engine warm up. Order the model with options to suit your application.
( 134 )
$767.95
—
$921.95
Classic Holley carbs have been a staple for rodders around the world for decades. They're the perfect performance upgrade for stock to mildly modified vehicles and have that classic Holley look. Dual feed fuel inlets assure you get all the fuel you need while its vacuum secondaries and electric choke make it amazingly universal. Plus, it is gold dichromate coated for durability and classic Holley looks. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years.
( 74 )
$767.95
—
$921.95
Holley Coil-Near-Plug smart ignition coils are designed for use with Holley HP and Dominator ECUs, as well other EFI systems that can drive "smart" ignition coils. Although they are engineered for high-powered race applications, they can be used on street-driven vehicles, as well. They are available individually (includes mating connector and pins) or in kits that include everything you need to upgrade your ignition. Additional tech specs: * Peak voltage: 44,000 V * Peak output: 102 Mj * Maximum battery voltage: 17.0 V * Kits include coils, sub-harnesses, connectors, wires, and a wiring loom Note: Upgrading a non-coil-near-plug main harness requires HLY-558-307 Holley universal coil-on-plug harness, sold separately, to complete the installation.
( 10 )
$767.95
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$870.95
Designed as a bolt-on replacement for GM's venerable Quadrajet, Holley's 4175 carburetors utilize a front-mounted fuel bowl fitting, allowing you to reuse the stock fuel line. Other features include vacuum secondaries, power valve blowout protection, a spread bore flange, and a choke.
( 4 )
$819.95
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they're available in your choice of universal or direct-fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
( 261 )
$870.95
The all new Aluminum Street HP's weigh up to 40% less and are even easier on your wallet. Holley is proud to introduce the all new Aluminum Street HP™. They utilize the best features from Holley's Race Bred 4150 HP™ carbs, but are tamed for street and light competition use. The Street HP features an aluminum contoured main body design taken from the race winning 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability and maximum performance. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc. The Aluminum Street HP takes all the great features from the race bred HP and the Double Pumper and combines them into the perfect street/strip carburetor.
( 37 )
$819.95
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$819.95
—
$972.95
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$819.95
—
$972.95
Holley Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (red, blue, or black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs. less than a comparable zinc carburetor. Holley Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as 4 corner idle for precise idle control, mechanical secondaries for great performance, clear fuel level sight plugs for easy, no mess fuel level adjustments, Ford automatic transmission kickdown for use on popular Ford transmissions, four vacuum ports for all necessary vacuum accessories, and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with red, blue, or black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track.
( 81 )
$921.95
—
$972.95
Holley LS throttle bodies are unquestionably the biggest bore and most feature-loaded option available. Holley went back to the drawing board and built the ultimate air valve for your LS engine. They are available with huge 105mm or 95mm bores--and low rpm, drive-friendly tapers. The 105mm version is designed for drag race applications when wide-open throttle is all that matters. Features like idle bleed adjustment, TPS clocker, and PCV passage defeat valve units, making them the ultimate throttle bodies for ease of installation and tuning. Regardless of whether you have a turbo, supercharger, or a big cam engine sucking gulps of air, Holley LS throttle bodies are manufactured from high-grade billet aluminum, and black anodized to give them a modern tech look, they're maximized for your application.
( 11 )
$849.95
—
$870.95
The carburetor gurus at Holley built these carbs with off-roading in mind. Features include maximum low-end torque and horsepower output, steep angle idle, spring-loaded needles and seats, four vacuum ports, and off-road vacuum secondaries. Their one-piece fuel bowl vent tube eliminates fuel spillover during extreme maneuvers, and their unique metering block provides flood-free operation. You'll have exceptional fuel control over rough terrain with the Holley Truck Avenger carburetor best suited for your off-road needs. Other product features include: * Aluminum-construction models available * Gold dichromate finish * Single-feed fuel inlet for ease of installation * Factory, preset electric choke for effortless startups or manual (cable-driven, hand-operated) choke for precise cold start control (depending on application) * Compatible with GM, Chrysler, and Ford A/T kickdown linkage (additional parts may be required) * 100 percent wet-flow tested assuring it arrives ready-to-run
( 15 )
$819.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 144 )
$767.95
—
$870.95
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$767.95
—
$921.95
Push your racing performance to the next level with Holley Track Warrior carburetors. The aluminum contoured main body design weighs less while adding horsepower and torque. These carbs have screw-in air bleeds for precision tuning capabilities, billet metering blocks, a billet base plate, adjustable secondary linkage, and knurled (hand-adjustable) curb idle screws. Features of Holley Track Warrior carbs include: * Aluminum construction for weight savings and long-lasting good looks * Color options include purple or black * Optimized race calibrations for outstanding throttle response * Contoured Venturi inlet offers balanced airflow for increased horsepower * Four-corner idle for precise idle control * Mechanical secondaries for remarkable tire-turning performance * Billet metering blocks for improved durability (compared to cast blocks) * True gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictor, and idle feed restrictors.) * Available in 650, 750, and 850 cfm versions * For lightweight vehicles with manual transmissions or automatics with a high stall and low gearing * 100 percent wet-flow tested by Holley technicians to ensure on-arrival performance
( 31 )
$849.95
—
$972.95
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$972.95
Holley universal 4-barrel 1000 cfm 4150 flange throttle bodies feature integrated throttle position, idle air control and intake air temperature sensors to work with your aftermarket multi-port EFI system. Their standard square bore mounting pattern is designed to fit perfectly on most intake manifolds and the stout 1,000 cfm can handle high horsepower with no problem. These units have a CFD computer-designed modeled air entry area--so maximum velocity and accelerated air speed are delivered to the engine. The high-flow idle air control passages are great for large cu. in. to aid in idle stability. Holley universal 4-barrel 1000 cfm 4150 flange throttle bodies have an integrated GM 700R4 transmission kickdown location, as well as a kickdown lever for use with Ford transmissions. They feature all necessary vacuum ports, one timed spark, two 3/8 in. and two 3/16 in. full manifold vacuum ports. The 1.750 in. diameter throttle plates are mounted to PTFE-coated throttle shafts for high flow and smooth feel. Their high-quality die cast aluminum construction provides excellent strength while reducing weight, and they're offered in your choice of tumble polish or hard gray anodized finishes.
( 16 )
$767.95
Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.
( 1 )
$921.95
Holley EFI Terminator X fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. you are sure to find an injector that matches your non-emissions-controlled application. Holley EFI Terminator X fuel injectors can also be used with any ECU that utilize high-impedance fuel injector drivers. Features: * PICO/EV6-style performance injectors are sold individually or in a set of 8 * High impedance for use with saturated drivers * Rated injector flow 220 lb./hr. at 43 psi of base fuel pressure * USCAR injector connector * 40mm O-ring to O-ring length * Compatible with many OEM LS intake manifolds * Easy to install in any Holley EFI Hi-Ram intake, using Holley fuel rail adapter kit
( 31 )
$767.95
—
$819.95
Holley HP™ carburetors have been the standard in racing carburetors for nearly two decades. Powering the biggest names in NASCAR to the Saturday night racer, HP carburetors are the perfect choice for all types of motorsports. Classic HP carburetors are available from 390 to 1000 CFM and feature a contoured venturii inlet for balanced air flow, screw in air bleeds for precision tuning capabilities, high flow metering blocks and Dominator style fuel bowls which allow pluming from either side for ease of installation. Holley HP carburetors are the standard for square bore race carburetors.
( 6 )
$921.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
