Availability
On Sale
Holley offers a selection of both dedicated and universal-style fuel lines for their carburetors. Hard lines are chrome plated and double flared at the outlets. Braided stainless steel lines offer premium features such as rugged billet-style construction and AN aluminum fittings.
( 171 )
$56.65
$50.95
—
$64.39
On Sale
Holley power steering hard lines offer a clearance solution. The pressure hose connection on the Type II power steering pump is really close to the pulley making it difficult to attach the hose. Holley power steering hard lines move the connection behind and below the pump for clearance and improved appearance. The special banjo bolt and crush washers provide additional clearance. Holley also includes a mounting bracket that makes the hardline stronger and less likely to crack from vibration or abuse. The kits are made from strong steel and zinc plated.
( 3 )
$127.95
$70.85
—
$99.95
On Sale
Holley EFI Stealth 4150 fuel logs provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. For use with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems, these fuel crossovers are easy to install, with their -6 AN male inlet that connects to your existing fuel system. They come pre-assembled by Holley to ensure a leak-free installation.
( 7 )
$75.05
$67.55
Holley offers air conditioning line kits for a variety of applications, including many Ford small block Windsor engines from 1963-2001. These aluminum replacement lines are configured according to factory specifications to ensure proper fitment and climate performance. Assemblies are available separately to route A/C lines to the driver and passenger sides. They meet or exceed OE quality standards.
Not Yet Reviewed
$84.19
—
$91.75
On Sale
Holley carburetor bypass style fuel pressure regulators are designed for systems that require a return line back to the tank. They're used for carbureted applications only, and are preset at 7 psi. The regulators are made of aluminum and feature a natural or black finish.
( 204 )
$81.09
On Sale
Holley has fittings to adapt different sized fuel lines to bare Holley fuel bowls, as well as hose and banjo fittings for special applications.
( 106 )
$66.55
On Sale
Holley EFI GM-style fuel filters have a built-in regulator to provide a simple and clean means to fueling your LS swap. Available with OEM-style or -6AN connections, they feature an internal regulator set at 58 psi, along with an integrated 5 nominal micron rated filter. The bypass design allows you to run one inlet with one outlet to the engine, and a return outlet back to the tank. Holley EFI fuel filter regulators are ideal when performing a LS engine swap or any other fuel injection swap that is designed to run at 58 psi of static pressure. Choose the fuel filter/regulator with the proper connections for your vehicle. Features: * All stainless-steel construction for improved corrosion resistance * Designed with one inlet, one outlet, and one return * Fixed pressure at 58 psi * Nominal micron rating: 5 * Can be used with other EFI systems that require 58 psi * Not recommended with fuel pumps that flow over 450 lph * Return line required for proper regulator operation
( 9 )
$77.15
$69.45
On Sale
New for the Holley Sniper EFI product line is a factory replacement Sniper EFI canister-style ignition coil. This ignition coil is potted with a premium-grade epoxy, making it perfect for high-vibration environments—and it can be mounted in any direction, even if it's horizontal, vertical, or upside down. "No oil" means "no failure" for multiple mounting positions. The Sniper EFI canister coil is perfect for anyone wanting to upgrade their ignition system, while maintaining a factory look under the hood. Features: * Metal canister is epoxy filled to protect the internal coil windings from high-vibration applications * Improved output coil for electronic ignitions, and MSD ignitions (ballast resistor required for points) * 100:1 turns ratio and lower primary resistance produce high-voltage output
( 6 )
$63.05
$56.75
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$99.95
—
$159.95
$87.95
—
$89.95
On Sale
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$62.45
On Sale
Holley has you covered with their extensive line of OE-style wiring components, including connector terminal pins to help you build or service your Holley EFI-powered machine. These pins are available in a variety of styles for different connectors and wire gauge. From replacement connectors and pins … to wire loom and tools—make Holley your one-stop solution for all of your wiring component needs.
( 4 )
$65.85
$59.25
When installing a new clutch master cylinder and slave cylinder/throw-out bearing assembly, it is highly recommended to replace the fluid reservoir. Holley now offers replacement hydraulic clutch master cylinder reservoirs for your modern muscle car that feature a polymer reservoir with a cap and line.
( 3 )
$64.15
Holley fuel rail adapter fittings are designed to connect Holley fuel rails to a GM factory fuel line. They're machined from aluminum (black anodized) or steel (yellow dichromate), and are available in different sizes, angles, and attachment options.
( 3 )
$52.25
On Sale
Holley Sniper EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. Order a set of eight Holley Sniper EFI performance fuel injectors for use with your Holley EFI intake manifold. Features: * PICO/EV6-style performance injectors * High impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp (maximum) * Tri-cone spray pattern * Not intended as service injectors for Sniper EFI TBI product line
( 1 )
$86.95
$78.25
The Holley EFI vacuum manifold kit is designed for as a simple and clean solution for plumbing either vacuum or boost referenced sources. This manifold block features 12 1/8th NPT ports that can be plumbed with most common EFI transducers, such as the Holley 554-102 0-100 psi transducer. It also features two -6 O-ring boss AN ports, ensuring your manifold block has an excellent vacuum or boost reference source. Improve your engine bay organization by mounting all of your common pressure sources in one easy-to-access location! Product features: * Compatible with all transducers that utilize 1/8 NPT male threads and 7/8 in. or smaller body/hex diameter * 12 independent 1/8 NPT ports * Two -6 ORB ports * Improve engine bay organization by mounting transducers and/or vacuum lines all in one easy-to-reach location * Ideal for engines that require multiple vacuum/boost reference sources * 4 mounting holes designed for the use of 5/16 in. socket head cap hardware for secure and robust mounting * Crafted from 6061 aluminum * Anodized black for durability and laser-etched with the Holley EFI logo
Not Yet Reviewed
$73.19
Holley carburetor carrying cases are made of durable plastic, and are designed to securely hold and protect your carburetor during storage or transportation. There's even room enough to accommodate a dual feed line, so it need not be disconnected from the carburetor. A neat carrying handle rounds out the package and adds convenience, and the locking tabs promote security. They can hold a Holley model 2300, 4150, or 4160 carburetor.
Not Yet Reviewed
$92.99
On Sale
Optimizing your dash solution to display your vehicle speed is simple with Holley GPS digital USB modules. The 46 in. USB cables allow you to install the digital display unit virtually anywhere on the dashboard—without the need for external sensor information. Eliminate old, noisy mechanical speedometer cables and step up to Holley's accurate GPS speedometer output module. Additional information: * USB connection for user-friendly, plug-and-play installation * Magnetic base provides for multiple mounting solutions * 10 Hz refresh rate for ultra-accurate, real-time speedometer output * Requires clear line-of-sight with the sky for satellite acquisition * Can only be used with 553-106 or 553-109 digital dashes
Not Yet Reviewed
$106.95
$96.25
On Sale
Holley offers analog fuel pressure gauges in a variety of diameters, styles, fittings, and standard or liquid-filled versions. They feature classic faces and chrome or black bezels, depending on the model. Now you can monitor your fuel density in retro style with a Holley analog fuel pressure gauge!
( 83 )
$99.95
$89.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
