Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale
Holley Water/Methanol Injection Driver Modules
Holley water/methanol injection driver modules are designed to be used with HP EFI or a Dominator EFI ECUs. They will drive up to two water or methanol solenoids and are made out of high-quality materials to ensure long-lasting durability and performance. So, if you're in the market for a high-current water/methanol peak and hold module, Holley water/methanol injection driver modules are what you need.
Not Yet Reviewed
$156.95
$88.61
Holley Replacement Idle Air Control Motors
Holley replacement idle air control motors will fit your Holley and Sniper fuel injection systems without any modifications. Designed to be plug-and-play for easy replacement and like-new operation. Order the correct valve for your application today.
( 26 )
$89.65
On Sale
Holley GM Distributor Wiring Harness Adapters
Holley GM distributor wiring harness adapters are designed to connect the distributor to the Holley ECU. They fit all digital interactive Holley Pro-Jection and Commander 950 fuel injection systems. The harness adapters will allow the use of the ignition control feature that is part of the Holley ECU.
( 2 )
$60.75
$54.68
On Sale
Holley Sniper 2 EFI Input/Output Wiring Harnesses
Holley Sniper 2 EFI input/output wiring harnesses give you access to two ground trigger inputs, two ground trigger outputs, the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things such as AC Kick and nitrous stage activation. The output grounds can be used for electronic fan control, or A/C shutdown at WOT. This harness includes an additional 0-5 V TPS output commonly used for transmission control units, and a tach output wire to drive most common aftermarket tachometers. Additional details: * Wires come individually labeled for easy identification * 4 x 5 ft. long output wires * 2 x 5 ft. long input wires
( 5 )
$82.49
$74.24
Holley Terminator X Wideband Adapter Harnesses
Holley Terminator X wideband adapter harnesses are intended to be used as service components for your Terminator X EFI installation. The Terminator X ECU (electronic control unit) features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. The Terminator X Max ECU features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. This is the wideband adapter harness only.
( 2 )
$64.15
On Sale
Holley Sniper EFI Input/Output Wiring Harnesses
Holley Sniper EFI input/output wiring harnesses give you the access to two ground trigger inputs and three ground trigger outputs. These harnesses also include the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things, such as A/C kick-on and nitrous stage activation! The output grounds can be used for electronic fan control, or A/C shutdown at wide open throttle. Features: * Wires are individually labeled for easy identification * Two 3 ft. long inputs wires * One 3 ft. long output wire * Two 5 ft. long output wires * One 5 ft. tachometer output * One 3 ft. points output wire * One 5 ft. long digital gauge output for Holley EFI analog gauges
( 1 )
$66.09
$59.48
On Sale
Holley Carburetor Float Kits
Holley carburetor float kits work with side-hung and center-hung Demon and aftermarket Holley carburetor floats, as well as many OE Holley, Ford, Chrysler, GM, Motorcraft, AMC, and Rochester marine carburetors. Offered in brass and Nitrophyl for internally and externally adjustable floats, they're available as primary floats, secondary floats, and secondary floats with notches that include jet extensions. Holley's wedged floats feature a reinforced float bracket assembly that allows more fuel to flow through the bracket—especially when using bottom-feed needles and seats. Technical notes for Holley carburetor float kits: * Wedged floats are designed for oval track use, so the float stays open in turns * The use of brass floats on the secondary side of Model 4160 carburetors factory-equipped with Nitrophyl floats may result in loss of fuel control and flooding if the floats contact the metering plate * You should only install jet extensions and notched floats in rear fuel bowls
( 109 )
$51.19
—
$57.59
Holley Billet Fuel Pressure Regulator Brackets
Holley billet fuel pressure regulator brackets are designed to mount to the passenger side carb studs on your 4-barrel carburetor. The mounting location lends itself to easy plumbing of the inlet and outlet fittings, and shortens the distance to the float bowls for optimum fuel pressure control. These brackets are made to clear double pumper throttle linkage, electric and manual chokes, and other vacuum ports. They're made from billet aluminum for durability and longevity.
( 10 )
$65.95
—
$72.15
Holley Fuel Injection Connector Kits
Holley fuel injection connector kits are your EFI multi-port connectors. Complete connector and pin kits are available for Holley MPFI and Stealth Ram Power Pack kits. Includes connector and pins for: * Manifold Absolute Pressure (MAP) sensor * Idle Air Control (IAC) sensor * Throttle Position Sensor (TPS) * Coolant Temperature Sensor (CTS) * Air Intake Temperature (AIT) sensor
Not Yet Reviewed
$57.65
On Sale
Holley EFI Terminator X Fuel Injectors
Holley EFI Terminator X fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. you are sure to find an injector that matches your non-emissions-controlled application. Holley EFI Terminator X fuel injectors can also be used with any ECU that utilize high-impedance fuel injector drivers. Features: * PICO/EV6-style performance injectors are sold individually or in a set of 8 * High impedance for use with saturated drivers * Rated injector flow 220 lb./hr. at 43 psi of base fuel pressure * USCAR injector connector * 40mm O-ring to O-ring length * Compatible with many OEM LS intake manifolds * Easy to install in any Holley EFI Hi-Ram intake, using Holley fuel rail adapter kit
( 32 )
$73.05
—
$94.49
$65.75
—
$85.04
On Sale
Holley EFI Fuel Pulse Dampers
Holley EFI fuel pulse dampers act in tandem with the fuel pressure regulator to further control the fuel pressure in an EFI system. They act to smooth out the pressure pulsations caused by the injectors opening and closing as well as the fuel pump operating. These pulsations happen so quickly that in many cases they can't be identified with an analog gauge but can cause issues with fuel delivery to the engine. Options include: * Direct-mount or inline mount * Multiple inlet/outlet dimensions * Standard or extended fuel pressure range * Male or female threads Features: * Engineered to stabilize pressure pulsations caused by the injectors opening; ideal for applications with large fuel injectors and high-volume fuel pumps * Compatible with any fuel; full anodized billet aluminum construction with stainless steel springs and fluorosilicone diaphragm * Fittings included for damper/regulators and direct-mount dampers * 1/8 in. NPT port on body of damper/regulators and inline dampers for easy installation of mechanical pressure gauge or pressure transducer * Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
( 6 )
$108.95
$98.05
On Sale
Holley Main Power Harnesses
Holley main power ignition harnesses are designed for use with your Holly EFI systems. These wiring harnesses work with other Holley components to correctly configure your EFI system.
( 1 )
$61.85
Holley Sniper 1 EFI to Sniper 2 EFI Adapter Harnesses
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? This harness is designed to do exactly that! The Holley Sniper adapter harness is a plug-and-play solution to connect your existing Sniper 1 wiring harness to a Sniper 2 throttle body! It can be used with any Sniper 2 system that is not equipped with a power distribution module (PDM). Simply remove your Sniper EFI throttle body from the intake manifold, unplug all of the connectors, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choosing, and enjoy the benefits of Sniper EFI 2. Make the switch to Sniper 2 in minutes! Sniper EFI 2 is a high performance electronic fuel injection system designed for a wide range of engines and horsepower goals. It provides improved engine performance, better fuel efficiency, and easier starting, making it the perfect upgrade for any enthusiast looking to take their ride to the next level. With its easy installation and advanced technology, the Sniper EFI 2 is the ultimate fuel injection system for any conventional V8 engine. Features: * Update your Sniper 1 to Sniper 2 in less than an hour: One-step, plug-and-play upgrade from your existing Sniper EFI install to a Sniper 2 throttle body * Eliminates the need to rewire your existing Sniper EFI installation * The wiring harness included with the Sniper 2 kit will not be used. This adapter is intended to be used with the original Sniper EFI wiring harness and new Sniper 2 EFI throttle body Sniper 2 EFI benefits: * (NEW) Next Generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires)  * (NEW) "Hidden Harness" wiring harnesses exit from the rear of throttle body for a clean appearance  * (NEW) Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V) and 1x tach output  * (NEW) Next Generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection 
( 4 )
$57.49
