Availability
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 94 )
$1,449.95
—
$1,899.95
$1,303.95
—
$1,708.95
On Sale
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,449.95
—
$2,549.95
$2,203.95
—
$2,293.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 18 )
$2,349.95
—
$2,549.95
$2,113.95
—
$2,293.95
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$435.95
—
$514.95
$391.95
—
$462.95
On Sale
Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning
( 56 )
$1,249.95
—
$1,549.95
$1,123.95
—
$1,393.95
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$1,849.95
—
$2,249.95
$1,663.95
—
$2,023.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$499.95
$448.95
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,949.95
—
$2,149.95
$1,753.95
—
$1,933.95
On Sale
Holley's Ford 7.3L Godzilla high-mount accessory drive complete kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$2,599.95
—
$3,199.95
$2,338.95
—
$2,878.95
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$449.95
—
$578.95
$403.95
—
$520.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$499.95
—
$699.95
$448.95
—
$628.95
On Sale
Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, these EFI low-profile SBF Dual Sync distributors share all the same great features of other Holley EFI Dual Sync distributors. The design includes dual Hall effect sensors for the crankshaft and camshaft signals. They can be used as just a crank speed input, as well as providing a cam sync signal for a sequential fueling operation—or to provide the needed crank and cam signals for coil-on-plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley Sniper EFI low-profile SBF Dual Sync distributors also provide compatibility with other EFI systems that support Hall effect crank and cam sensors. Product features include: * Plug-and-play with Holley EFI * CNC-machined billet aluminum housing * Integrated LEDs allow for easy setup * Hardened steel distributor gear
( 1 )
$549.95
$493.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
—
$899.95
$718.95
—
$808.95
On Sale
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,049.95
$943.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$549.95
$493.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 357 )
$136.95
—
$249.95
$123.25
—
$224.95
On Sale
Holley's EFI crank trigger kits provide accurate crank speed and position signals to Holley EFI systems in the most demanding, high-horsepower, racing applications. The crank position is measured every 10 degrees instead of every 45 degrees, like standard 4-magnet crank trigger systems. Holley's EFI crank trigger kits feature 1/4 in. thick, billet steel, 36-1 or 60-2 tooth-crank trigger wheels with black zinc oxide finish for superior corrosion resistance and striking good looks Other notable features include: * Crank wheels center off of balancer hubs, eliminating the need for centering rings * All billet, 6061-T6 aluminum sensor mounting brackets with "bright-dipped" black anodized finish and laser-etched Holley EFI logo * Custom 3-wire, ferrous-target, Hall-effect sensors with M12 x 1.0mm threads for finer gap adjustment * Grade 8 and mil-spec mounting hardware
( 6 )
$649.95
—
$675.95
$583.95
—
$607.95
On Sale
Holley Sniper offers transmission-specific controller harnesses for a variety of GM and Ford automatic transmission models. The plug-and-play harnesses are pre-terminated with j4 connectors. Order the harness recommended for your EFI application.
( 1 )
$269.95
$242.95
On Sale
Holley 525 LPH fuel pump modules are designed and engineered to meet the demands of today's high-pressure and high-flow engines with efficiency, reliability, and decades of engineering expertise. These high performance components with OE-quality and fitment in mind will deliver maximum fuel flow throughout a wide pressure range to support major horsepower. Kit includes assembled module, a new filter sock, flange O-ring, and the lock ring to help complete installation into stock fuel tanks. Holley 525 PLH fuel pump module features: * 6061-T6 Aluminum fuel pump module with a 525 LPH (liters per hour) * Sniper pump assembly drops into stock EFI fuel tank on select vehicles * 6AN O-ring outlet and return ports for easy plumbing connections * Can be used with both carbureted and EFI (Electronic Fuel Injection) fuel systems depending on your needs * Supports up to 1200 EFI or 1450 carb (hp at 60 psi at 13.5 V/16.9 amp draw; individual systems will vary based on fuel system design, the regulator type, fuel cell location, etc.) * Flange is bright dip black anodized for corrosion protection from undercar moisture
( 2 )
$431.95
$387.95
On Sale
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$599.95
$538.95
On Sale
Holley Sniper E85 in-tank electric fuel pumps are high-output models that fit the most popular EFI applications. The pumps can be regulated to support carbureted systems, as well, and all are compatible with gasoline or E85. Designed for applications requiring more fuel flow (utilizing the factory OE lines and mounting brackets), the 340 lph fuel pumps can also be used as a universal replacement—or upgrade for aftermarket applications requiring more fuel flow to support additional horsepower, while using power adders. Order the model recommended for your vehicle. Features include: * 340 lph E85-compatible * Designed for in-tank use only * Compact enough to fit in existing hanger assemblies without modification * Complete kit with all drop parts, accessories, and installation instructions * Filter, wiring pigtail, rubber hose, clamps, and rubber grommet included * Inlet filter meets or exceeds original equipment specifications and provides improved filtration/durability * Can be used with carbureted or EFI applications * Perfect upgrade for aftermarket pumps, like Holley retrofit EFI modules, when more fuel is needed with turbos or nitrous
( 30 )
$162.95
—
$169.65
$146.65
—
$152.65
On Sale
Holley's low-profile intake manifold for Ford's 7.3L Godzilla engine, when paired with a 20-340/20-340BK oil pan and accessory drive kit, allows for easy installation into vintage vehicles, kit cars, and other space-restricted applications while retaining the factory hood. The design focus for these manifolds was equal cylinder distribution and great street manners. The low-profile intake manifolds offer a much cleaner alternative to the original plastic intake; they provide anywhere from 2 to 3.5 in. of additional clearance, will correct the OE throttle body angle by 55 degrees, and increase the opening to 92mm. With three throttle body options, sturdy cast aluminum construction, a removable lower panel, and long runners to maintain the 7.3L's already substantial torque offering, this is a must-have for any Godzilla project. Throttle Body Options: * 1) 1986-1993 5.0L Mustang style drive-by-cable throttle bodies * 2) 2020-2023 7.3L drive-by-wire throttle body * 3) 2020-2023 GT500 drive-by-wire throttle body (requires P/N 300-903) Compatible Engine Components: * 1) Factory accessories as well as Holley accessory drives (except for 20-380 and 97-409) * 2) Factory fuel rails and Holley 534-265 / 534-266 billet rails Intake manifold features: * Lower profile (2+ inches) than the OE intake manifold * Sturdy cast aluminum construction that will hold up to the elements and forced induction * Perfect complement to Holley's Godzilla accessory drive and oiling system (20-320 / 20-320BK / 20-340 / 20-340BK) for fitment into tight engine bays * Removable lower intake panel that can be removed for additional porting, nitrous, etc. * Incorporates long runners for solid low-end torque * Includes throttle body gasket and all necessary O-rings and adapters to mount to the engine * Compatible with OE or Holley accessory drives and OE or Holley fuel rails * Corrects OE throttle body angle by 55 degrees * Available in natural or black powdercoat finish
Not Yet Reviewed
$927.95
—
$949.95
$617.95
—
$834.95
On Sale
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$249.95
$224.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
