Availability
Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.
( 1 )
$549.95
Holley EFI Gen III Hemi single plane intake manifolds provide maximum hood clearance combined with plenum and runner geometry that provides a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The isolated design of the air/fuel passages helps to increase charge air density and performance. Holley EFI Gen III Hemi single plane intake manifolds are great for turbocharger, centrifugal blower, or NOS power adders. Features: * Minimum carburetor flange height for maximum clearance to hood * 4150-type throttle/carb flange * Cast aluminum construction * Billet fuel rails * Billet aluminum oil fill cap * Mounting brackets for use with either Bosch EV1 or Gen III Hemi OEM fuel injectors * O-ring seals around ports * Natural or black finish available
( 2 )
$630.95
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$549.95
—
$573.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 36 )
$579.95
—
$599.95
On Sale
Mopar's popular Gen III Hemi engines are ideal for swapping into muscle cars since they are durable, reliable, and make great power. The factory oil pans that come on these engines usually do not fit and hang too low for your swap. Holley Gen III Hemi retrofit oil pans' cast aluminum construction and integrated windage tray combined with the O-ring sealing provide an attractive leak-free solution for your engine swap. With the included pickup assembly and mounting bolts, Holley Gen III Hemi mid-sump engine swap oil pans have everything you need for installation.
( 7 )
$534.95
The late-model factory power steering pump on the Mopar Gen III Hemi engines has too much pressure for the steering box on most older muscle cars and trucks, so Holley developed a low pressure power steering pump for Gen III Hemi swaps. These special Saginaw Type II low pressure power steering pumps produce the proper pressure, and the 6-rib billet aluminum pulley is sized to operate the pump at the proper speed when used with the existing drive system on Gen III Hemi engines. The special hardline adapter moves the power steering hose connection to a more accessible location for an easy installation and maintenance. Features and benefits: * Low-pressure power steering pump it—use with factory low-pressure steering boxes on muscle cars and trucks with Gen III Hemi engine * Works with factory "car style" accessory drive system and fits 2003-2008 5.7L and 2005-2010 6.1L Gen III Hemi engines * Also fits some 2009-2013 5.7L and 2011-2013 6.4L with 4.34-inch belt spacing * Prevents damage to steering box on older vehicles * Billet aluminum mount with black anodized finish bolts to existing tapped holes on the left side cylinder head of Gen III Hemi engines * 6-rib billet aluminum pulley with black anodized finish sized for proper pump speed * Power steering pump assembly includes a plastic reservoir * Special hardline moves -6 AN hose connection to a more accessible location
( 1 )
$534.95
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
Holley Gen III Hemi timing covers are offered in two finishes for your mid-mount accessory drive system. Available for Hemi engines with or without VVT, these covers are the correct replacements for those originally supplied in your Holley complete accessory system. They will provide the perfect fit and expected performance to service your system. Choose the Gen III Hemi timing cover required for your setup.
Not Yet Reviewed
$518.95
—
$573.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
